TCD1205DG(0Z,W)\"\" - TOSHIBA

TCD1205DG

2004-02-02 1/13

TOSHIBA CCD LINEAR IMAGE SENSOR CCD(Charge Coupled Device)

TCD1205DG

The TCD1205DG is a high sensitive and low dark current

2048−elements linear image sensor. The sensor can be used for

POS handscanner.

The device is operated by only 5V power supply, and mounted in

22−pin cerdip package with hermetic sealed optical glass window.

The TCD1205DG has electronic shutter function (ICG).

Electronic shutter function can keep always output voltage

constant that vary with the intensity of lights.

FEATURES

z Number of Image Sensing Elements : 2048

z Image Sensing Element Size : 14µm by 200µm on

14µm centers

z Photo Sensing Region : High sensitive and low dark current pn photodiode

z Clock : 2 phase (5V)

z Internal Circuit : Electronic shutter function (ICG)

z Package : 22 pin cerdip

MAXIMUM RATINGS (Note 1)

CHARACTERISTIC SYMBOL RATING UNIT

Clock Pulse Voltage Vφ

Shift Pulse Voltage VSH

Reset, Boost Pulse Voltage VRS, VBT

Integration Clear Gate Pulse Voltage VICG

Power Supply Voltage VOD

−0.3~8 V

Operating Temperature Topr −25~60 °C

Storage Temperature Tstg −40~100 °C

Note 1: All voltage are with respect to SS terminals (Ground).

Weight: (3.5g (Typ.))

PIN CONNECTION

(TOP VIEW)

• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general

can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the

buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and

to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or

damage to property.

In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the

most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling

Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..

• The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal

equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are

neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or

failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy

control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control

instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document

shall be made at the customer’s own risk.

000707EBA2

Preliminary

TCD1205DG

2004-02-02 2/13

CIRCUIT DIAGRAM

PIN NAMES

φ1 Clock (Phase 1)

φ2 Clock (Phase 2)

RS Reset Gate

SH Shift Gate

ICG Integration Clear Gate

BT Boost Gate

OS Signal Output

DOS Compensation Output

OD Power

SS Ground

NC Non Connection

• The products described in this document are subject to the foreign exchange and foreign trade laws.

• The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by

TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its

use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or

others.

• The information contained herein is subject to change without notice.

000707EBA2

TCD1205DG

2004-02-02 3/13

OPTICAL / ELECTRICAL CHARACTERISTICS

(Ta = 25°C, VOD = 5V, Vφ = VSH = VRS = VBT = 5V (Pulse), fφ = 0.5MHz, fRS = 1MHz,

Load Resistance = 100kΩ, tINT (Integration Time) = 10ms,

Light Source = Daylight Fluorescent Lamp)

CHARACTERISTIC SYMBOL MIN TYP. MAX UNIT NOTE

Sensitivity R 64 80 ― V / lx·s (Note 2)

Photo Response Non Uniformity PRNU ― ― 10 % (Note 3)

Saturation Output Voltage VSAT 0.55 0.8 ― V (Note 4)

Saturation Exposure SE 0.006 0.01 ― lx·s (Note 5)

Dark Signal Voltage VMDK ― 2 5 mV (Note 6)

DC Power Dissipation PD ― ― 25 mW

Total Transfer Efficiency TTE 92 95 ― %

Output Impedance Zo ― 0.5 1 kΩ

Dynamic Range DR ― 400 ― ― (Note 7)

DC Signal Output Voltage VOS 1.5 3.0 4.5 V (Note 8)

DC Compensation Output Voltage VDOS 1.5 3.0 4.5 V (Note 8)

DC Mismatch Voltage |VOS−VDOS|― ― 200 mV (Note 8)

Note 2: Sensitivity for LED (660nm) is 600V / lx·s (Typ.)

Note 3: Measured at 50% of SE (Typ.)

Definition of PRNU: PRNU =

()

%100×

χ∆

Where

χ is average of total signal outputs and

∆

is the maximum deviation from χ under uniform

illumination.

Note 4: VSAT is defined as minimum saturation output voltage of all effective pixels.

Note 5: Definition of SE : SE =

()

s·lx

SAT

Note 6: VMDK is defined as maximum dark signal voltage of all effective pixels.

Note 7: Definition of DR : DR =

MDK

SAT

MDK is proportional to tINT (Integration time).

So the shorter tINT condition makes wider DR value.

Note 8: DC signal output voltage and DC compensation output voltage are defined as follows:

TCD1205DG

2004-02-02 4/13

OPERATING CONDITION

CHARACTERISTIC SYMBOL MIN TYP. MAX UNIT

“H” Level 4.5 5.0 5.5

Clock Pulse Voltage

“L” Level

Vφ0 0.2 0.5

“H” Level 4.5 5.0 5.5

Shift Pulse Voltage

“L” Level

VSH 0 0.2 0.5

“H” Level 4.5 5.0 5.5

Reset, Boost Pulse

Voltage “L” Level

VRS, VBT 0 0.2 0.5

“H” Level 4.5 5.0 5.5

Integration Clear Gate

Voltage “L” Level

VICG 0 0.2 0.5

Power Supply Voltage VOD 4.5 5.0 5.5 V

CLOCK CHARACTERISTICS (Ta = 25°C)

CHARACTERISTIC SYMBOL MIN TYP. MAX UNIT

Clock Pulse Frequency fφ0.01 0.5 1.0 MHz

Reset Pulse Frequency fRS 0.02 1.0 2.0 MHz

Clock Capacitance CΦA ― 400 500 pF

BT Gate Capacitance CBT ― 10 25 pF

Shift Gate Capacitance CSH ― 200 250 pF

Reset Gate Capacitance CRS ― 10 25 pF

Integration Clear Gate Capacitance CICG ― 100 200 pF

TCD1205DG

2004-02-02 5/13

TAIMING CHART

TCD1205DG

2004-02-02 6/13

TAIMING CHART

(

EXAMPLE : USE ELECTRONIC SHUTTER

)

TCD1205DG

2004-02-02 7/13

TIMING REQUIREMENTS

Note 10: If

φ1 & φ2 pulse cross point couldn't be kept over 2.5V, it should be 1.5V and t23 and t24 should be 60ns.

TCD1205DG

2004-02-02 8/13

CHARACTERISTIC SYMBOL MIN TYP. MAX UNIT

Pulse Timing of SH & φ1 t1 0 100 ― ns

Pulse Timing of SH &φ1 t5 2000 3000 ― ns

SH, ICG Pulse Rise & Fall Time t2, t4 0 50 ― ns

SH Pulse Width (Note 11) t3, t3' 1000 2000 ― ns

Pulse Timing of SH & ICG t6 50 100 * ns

Pulse Timing of SH & ICG t7 1000 ― t5 ns

Pulse Timing of ICG &φ1 t8 0 100 ― ns

Pulse Timing of ICG &φ1 t9 500 ― ― ns

φ1, φ2 Pulse Rise & Fall Time t10, t11 0 60 ― ns

RS, BT Pulse Rise & Fall Time t12, t14 0 60 ― ns

RS Pulse Width t13 60 260 ― ns

Pulse Timing ofφ1, φ2, RS t15 20 ― ― ns

Pulse Timing of RS & BT t16 50 100 ― ns

Pulse Timing of RS & BT t17 20 ― ― ns

Pulse Timing of RS & BT t18 40 ― ― ns

Pulse Timing of RS & BT t19 200 ― ― ns

BT Pulse Width t20 70 250 ― ns

Video Data Delay Time t21, t22 ― 80 ― ns

Note 11: Have to use t3 = t3'

* t6 = MAXIMUM TIMING

TCD1205DG

2004-02-02 9/13

TCD1205DG

2004-02-02 10/13

TCD1205DG

2004-02-02 11/13

TYPICAL DRIVE CIRCUIT

TCD1205DG

2004-02-02 12/13

CAUTION

1. Window Glass

The dust and stain on the glass window of the package degrade optical performance of CCD sensor.

Keep the glass window clean by saturating a cotton swab in alcohol and lightly wiping the surface, and

allow the glass to dry, by blowing with filtered dry N2. Care should be taken to avoid mechanical or

thermal shock because the glass window is easily to damage.

2. Electrostatic Breakdown

Store in shorting clip or in conductive foam to avoid electrostatic breakdown.

CCD Image Sensor is protected against static electricity, but interior puncture mode device due to static

electricity is sometimes detected. In handing the device, it is necessary to execute the following static

electricity preventive measures, in order to prevent the trouble rate increase of the manufacturing system

due to static electricity.

a. Prevent the generation of static electricity due to friction by making the work with bare hands or by

putting on cotton gloves and non-charging working clothes.

b. Discharge the static electricity by providing earth plate or earth wire on the floor, door or stand of the

work room.

c. Ground the tools such as soldering iron, radio cutting pliers of or pincer.

It is not necessarily required to execute all precaution items for static electricity.

It is all right to mitigate the precautions by confirming that the trouble rate within the prescribed

range.

3. Incident Light

CCD sensor is sensitive to infrared light. Note that infrared light component degrades resolution and

PRNU of CCD sensor.

4. Lead Frame Forming

Since this package is not strong against mechanical stress, you should not reform the lead frame.

We recommend to use a IC-inserter when you assemble to PCB.

5. Soldering

Soldering by the solder flow method cannot be guaranteed because this method may have deleterious

effects on prevention of window glass soiling and heat resistance.

Using a soldering iron, complete soldering within ten seconds for lead temperatures of up to 260°C, or

within three seconds for lead temperatures of up to 350°C.

TCD1205DG

2004-02-02 13/13

PACKAGE DIEMENSIONS

WDIP22−G−400−2.54A (D) Unit: mm

Note 1: No. 1 SENSOR ELEMENT (S1) TO EDGE OF PACKAGE.

Note 2: TOP OF CHIP TO BOTTOM OF PACKAGE.

Note 3: GLASS THICKNES (n = 1.5)

Weight: (3.5g (Typ.))

6.46±0.8

8.1TYP

28.6(14umX2048)