For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
7 - 1
HMC820LP6CE
FRACTIONAL-N PLLs w/ INTEGRATED VCO
1095 - 1275, 2190 - 2550, 4380 - 5100 MHz
v06.1211
Functional Diagram
Features
• Tri-band RF Bandwidth:
1095-1275, 2190-2550, 4380-5100 MHz
• Ultra Low Phase Noise
-105 dBc/Hz in Band Typ.
• Figure of Merit (FOM) -227 dBc/Hz
• <180 fs RMS Jitter
• 24-bit Step Size, Resolution 3 Hz typ
• Exact Frequency Mode
• Built in Digital Self Test
• 40 Lead 6x6 mm SMT Package: 36 mm2
Typical Applications
• Cellular/4G Infrastructure
• Repeaters and Femtocells
• Communications Test Equipment
• CATV Equipment
• Phased Array Applications
• DDS Replacement
• Very High Data Rate Radios
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
7 - 2
General Description
The HMC820LP6CE is a fully functioned Fractional-N Phase-Locked-Loop (PLL) with an Integrated Voltage Controlled
Oscillator (VCO). The PLL consists of an integrated low noise VCO with a tri-band output, an autocalibration subsystem
for low voltage VCO tuning, a very low noise digital Phase Detector (PD), a precision controlled charge pump, a low
noise reference path divider and a fractional divider.
The fractional PLL features an advanced delta-sigma modulator design that allows both ultra-ne step sizes and low
spurious products. The phase detector (PD) features cycle slip prevention (CSP) technology to allow faster frequency
hopping times. Ultra low in-close phase noise and low spurious also allows wider loop bandwidths for faster frequency
hopping and low micro-phonics.
For theory of operation and register map refer to the “PLLs with Integrated VCOs - RF VCOs Operating Guide”. To
view the Operating Guide, please visit www.hittite.com and choose HMC820LP6CE from the “Search by Part
Number” pull down menu.
HMC820LP6CE
v06.1211
FRACTIONAL-N PLLs w/ INTEGRATED VCO
1095 - 1275, 2190 - 2550, 4380 - 5100 MHz
Parameter Condition Min. Ty p. Max. Units
RF Output Characteristics
VCO Frequency at PLL Input 4380 5100 MHz
RF Output Frequency at fVCO/2 1095 1275 MHz
RF Output Frequency at fVCO 2190 2550 MHz
RF Output Frequency at 2fVCO 4380 5100 MHz
RF Output Power at fVCO/2 7. 5 10 12.5 dBm
RF Output Power at fVCO 36.5 10 dBm
RF Output Power at 2fVCO -9 -4 1dBm
VCO Tuning Sensitivity Measured at fo, 2V 12 16 24 MHz/V
VCO Supply Pushing Measured at fo, 2V -2 1.5 MHz/V
RF Output fo/2 Harmonic Doubler Mode -22 -18 dBc
RF Output 3fo/2 Harmonic Doubler Mode -50 -41 dBc
RF Output 2nd Harmonic fo/2/fo/2fo -25 / -30 / -42 -20 / -19 / -36 dBc
RF Output 5fo/2 Harmonic Doubler Mode -60 -56 dBc
RF Output 3rd Harmonic fo/2/fo/2fo -27 / -40 / -60 -24 / -30 / -51 dBc
RF Output 7fo/2 Harmonic Doubler Mode -65 -61 dBc
RF Output 4th Harmonic fo/2/fo/2fo -30 / -50 / -68 -25 / -42 / -62 dBc
RF Divider Characteristics
19-Bit N-Divider Range (Integer) Max = 219 - 1 524,287
19-Bit N-Divider Range (Fractional) Fractional nominal divide ratio
varies (-3 / +4) dynamically max 524,283
REF Input Characteristics
Max Ref Input Frequency
Synthesizer phase noise can
degrade by about 5 dB when
operating with a reference
frequency near the low end of
this range.
10 50 200 MHz
Ref Input Range AC Coupled 1 2 3.3 Vp-p
Ref Input Capacitance 5pF
14-Bit R-Divider Range 116,383
Electrical Specications, TA = +25° C
VPPCP, VDDCP, VCC1, VCC2 = 5V ±4%; RVDD, AVDD, DVDD3V, VCCPD, VCCHF, VCCPS =
3.3V ±6% GNDCP = GNDLS = Ground Paddle = 0V
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
7 - 3
Parameter Condition Min. Ty p. Max. Units
Phase Detector (PD)
PD Frequency Fractional Feedback Mode [1] 0.1 100 MHz
PD Frequency Fractional Feedforward Mode
(and Register 6 [17:16] = 10) 0.1 80 MHz
PD Frequency Integer Mode 0.1 125 MHz
Charge Pump
Output Current 0.02 2.54 mA
Charge Pump Gain Step Size 20 µA
PD/Charge Pump SSB Phase Noise 50 MHz Ref, Input Referred
1 kHz -141 dBc/Hz
10 kHz Add 1 dB for Fractional -149 dBc/Hz
100 kHz Add 3 dB for Fractional -153 dBc/Hz
Logic Inputs
VIH Input High Voltage DVDD3V-0.4 DVDD3V V
VIL Input Low Voltage 0 0.4 V
Logic Outputs
VOH Output High Voltage DVDD3V-0.4 DVDD3V V
VOL Output Low Voltage 00.4 V
Power Supply Voltages
Analog 3.3V Supplies AVDD, VCCHF, VCCPS,
VCCPD, RVDD 3.0 3.3 3.5 V
Digital Supply DVDD3V 3.0 3.3 3.5 V
Analog 5V Supplies VPPCP, VDDCP, VCC1, VCC2 4.8 55.2 V
Power Supply Currents
+5V Analog Charge Pump VPPCP, VDDCP 5.3 mA
+5V VCO Core and PLL Buffer VCC2 56 mA
+5V VCO Divider and RF Buffer VCC1 36 mA
+3.3V Analog AVDD, VCCHF, VCCPS,
VCCPD, RVDD 45 mA
+3.3V Digital DVDD3V 6.5 mA
Power Down - Crystal Off Reg 01h=0,
Crystal Not Clocked 10 µA
Power Down - Crystal On, 100 MHz Reg 01h=0,
Crystal Clocked 100 MHz 10 200 µA
Power on Reset
Typical Reset Voltage on DVDD 700 mV
Min DVDD Voltage for No Reset 1.5 V
Power on Reset Delay 250 µs
HMC820LP6CE
v06.1211
FRACTIONAL-N PLLs w/ INTEGRATED VCO
1095 - 1275, 2190 - 2550, 4380 - 5100 MHz
Electrical Specications (Continued)
Note 1: This maximum phase detector frequency can only be achieved if the minimum N value is respected. eg. In the case of fractional feedback
mode, the maximum PFD rate = fvco/20 or 100 MHz, whichever is less.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
7 - 4
Electrical Specications (Continued)
HMC820LP6CE
v06.1211
FRACTIONAL-N PLLs w/ INTEGRATED VCO
1095 - 1275, 2190 - 2550, 4380 - 5100 MHz
Parameter Condition Min. Ty p. Max. Units
VCO Open Loop Phase Noise at fo/2
10 kHz Offset -93 -87 dBc/Hz
100 kHz Offset -122 -119 dBc/Hz
1 MHz Offset -147 -144 dBc/Hz
10 MHz Offset -162 dBc/Hz
100 MHz Offset -163 dBc/Hz
VCO Open Loop Phase Noise at fo
10 kHz Offset -87 -81 dBc/Hz
100 kHz Offset -116 -116 dBc/Hz
1 MHz Offset -141 -138 dBc/Hz
10 MHz Offset -161 dBc/Hz
100 MHz Offset -166 dBc/Hz
VCO Open Loop Phase Noise at 2fo
10 kHz Offset -81 -75 dBc/Hz
100 kHz Offset -110 -110 dBc/Hz
1 MHz Offset -135 -132 dBc/Hz
10 MHz Offset -155 dBc/Hz
100 MHz Offset -155 dBc/Hz
Closed Loop Phase Noise PLL + VCO at fvco/2
Integer, 25 MHz PD 1 kHz Offset -113 dBc/Hz
Integer, 25 MHz PD 10 kHz Offset -118 dBc/Hz
Integer, 25 MHz PD 100 kHz Offset -118 dBc/Hz
Fractional, 25 MHz PD 1 kHz Offset -108 dBc/Hz
Fractional, 25 MHz PD 10 kHz Offset -113 dBc/Hz
Fractional, 25 MHz PD 100 kHz Offset -114 dBc/Hz
Closed Loop Phase Noise PLL + VCO at fvco
Integer, 25 MHz PD 1 kHz Offset -107 dBc/Hz
Integer, 25 MHz PD 10 kHz Offset -112 dBc/Hz
Integer, 25 MHz PD 100 kHz Offset -112 dBc/Hz
Fractional, 25 MHz PD 1 kHz Offset -102 dBc/Hz
Fractional, 25 MHz PD 10 kHz Offset -107 dBc/Hz
Fractional, 25 MHz PD 100 kHz Offset -108 dBc/Hz
Closed Loop Phase Noise PLL + VCO at 2fo
Integer, 25 MHz PD 1 kHz Offset -101 dBc/Hz
Integer, 25 MHz PD 10 kHz Offset -106 dBc/Hz
Integer, 25 MHz PD 100 kHz Offset -106 dBc/Hz
Fractional, 25 MHz PD 1 kHz Offset -96 dBc/Hz
Fractional, 25 MHz PD 10 kHz Offset -101 dBc/Hz
Fractional, 25 MHz PD 100 kHz Offset -102 dBc/Hz
Figure of Merit Normalized 1 Hz
Integer Mode Measured w/ 50 MHz PD
at 30 kHz Offset -229 dBc/Hz
Fractional Mode Measured w/ 50 MHz PD
at 30 kHz Offset -227 dBc/Hz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
7 - 5
HMC820LP6CE
v06.1211
FRACTIONAL-N PLLs w/ INTEGRATED VCO
1095 - 1275, 2190 - 2550, 4380 - 5100 MHz
Free Running VCO Phase Noise
Over Temperature
Typical VCO Tuning Voltage After
Calibration
Closed Loop Integer Phase Noise
[1] Fractional Mode, 50 MHz Crystal, R=1, ~80 kHz Loop BW, (Loop lter values: Contact factory for component values) 2mA Charge Pump, -385µA
Offset.
-180
-170
-160
-150
-140
-130
-120
-110
-100
-90
-80
1095 MHz FF
2190 MHz FF
4380 MHz FF
102103104105106107108
OFFSET FREQUENCY (Hz)
PHASE NOISE (dBc/Hz)
-180
-170
-160
-150
-140
-130
-120
-110
-100
-90
-80
1096 MHz FF
2192 MHz FF
4384 MHz FF
102103104105106107108
OFFSET FREQUENCY (Hz)
PHASE NOISE (dBc/Hz)
-180
-160
-140
-120
-100
-80
-60
-40
103104105106107108
1095 MHz FF
2190 MHz FF
4380 MHz FF
OFFSET FREQUENCY (Hz)
PHASE NOISE (dBc/Hz)
900
950
1000
1050
1100
012345
TUNING VOLTAGE (V)
kvco (MHz/V)
n0 n2
n4
n6
n8
n10
n12
n14
n16
n18
n20
n22
n24
n26
n31
fmax
fmin
fmax
n30
-170
-160
-150
-140
-130
-120
-110
-100
+27C
+85C
-40C
2150 2206 2263 2319 2375 2431 2487 2544 2600
PHASE NOISE (dBc/Hz)
FREQUENCY (MHz)
1 MHz Offset
100 kHz Offset
10 MHz Offset
0
1
2
3
4
5
VCO FREQUENCY
TUNE VOLTAGE AFTER CALIBRATION (V)
0
15
31
fmin fmax
Typical Closed Loop Fractional Phase
Noise [1]
Typical Tuning Curves vs. Switch PositionFree Running Phase Noise
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
7 - 6
Figure of Merit
0
10
20
30
40
50
60
012345
TUNING CAP 31, 2160 MHz AT 2V
TUNING CAP 15, 2350 MHz AT 2V
TUNING CAP 0, 2604 MHz AT 2V
TUNING VOLTAGE (V)
kvco (MHz/V)
Typical Operating Range
-15
-10
-5
0
5
10
15
20
1000 2000 3000 4000 5000 6000
OUTPUT FREQUENCY (MHz)
OUTPUT POWER (dBm)
Divide-by-2
Fundamental
Doubler
-40C
27C
85C
-240
-230
-220
-210
-200
102103104105106
NORMALIZED PHASE NOISE (dBc/Hz)
FREQUENCY OFFSET (Hz)
FOM Floor
FOM 1/f Noise
Typ FOM vs Offset
HMC820LP6CE
v06.1211
FRACTIONAL-N PLLs w/ INTEGRATED VCO
1095 - 1275, 2190 - 2550, 4380 - 5100 MHz
Typical Output Power - Narrow Band
Match
Typical VCO Sensitivity vs. Cap @
Fo Voltage
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
7 - 7
HMC820LP6CE
v06.1211
FRACTIONAL-N PLLs w/ INTEGRATED VCO
1095 - 1275, 2190 - 2550, 4380 - 5100 MHz
Pin Descriptions
Pin Number Function Description
1AVDD DC Power Supply for analog circuitry.
2, 5, 6, 8, 9,
11 - 14, 18 - 22, 24,
26, 34, 37, 38
N/C The pins are not connected internally; however, all data shown herein
was measured with these pins connected to RF/DC ground externally.
3VPPCP Power Supply for charge pump analog section
4CP Charge Pump Output
7VDDCP Power Supply for the charge pump digital section
10 RVDD Reference Supply
15 XREFP Reference Oscillator Input
16 DVDD3V DC Power Supply for Digital (CMOS) Circuitry
17 CEN Chip Enable. Connect to logic high for normal operation.
23 VTUNE VCO Varactor. Tuning Port Input.
25 VCC2 VCO Analog Supply 2
27 VCC1 VCO Analog Supply 1
28 RF_ N [1] RF Positive Output
29 RF_P [1] RF Negative Output
30 SEN PLL Serial Port Enable (CMOS) Logic Input
31 SDI PLL Serial Port Data (CMOS) Logic Input
32 SCK PLL Serial Port Clock (CMOS) Logic Input
33 LD_SDO Lock Detect, or Serial Data, or General Purpose (CMOS) Logic Output (GPO)
35 VCCHF DC Power Supply for Analog Circuitry
36 VCCPS DC Power Supply for Analog Prescaler
39 VCCPD DC Power Supply for Phase Detector
40 BIAS
External bypass decoupling for precision bias circuits.
Note: 1.920V ±20mV reference voltage (BIAS) is generated internally and cannot
drive an external load. Must be measured with 10GΩ meter such as Agilent 34410A,
normal 10MΩ DVM will read erroneously.
[1] For doubler mode of operation, pin 28 (RF_N) and pin 29 (RF_P) outputs must be shorted together.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
7 - 8
Outline Drawing
Part Number Package Body Material Lead Finish MSL Rating Package Marking [1]
HMC820LP6CE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 H820
XXXX
[1] 4-Digit lot number XXXX
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST
BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR
SUGGESTED PCB LAND PATTERN.
Absolute Maximum Ratings
AVDD, RVDD, DVDD3V, VCCPD,
VCCHF, VCCPS -0.3V to +3.6V
VPP C P, V DDC P, V C C 1 -0.3V to +5.8V
VCC2 -0.3V to +5.5V
Operating Temperature -40°C to +85°C
Storage Temperature -65°C to 125°C
Maximum Junction Temperature 125 °C
Thermal Resistance (RTH)
(junction to ground paddle) 20 °C/W
Reow Soldering
Peak Temperature 260°C
Time at Peak Temperature 40 sec
ESD Sensitivity (HBM) Class 1B
Stresses above those listed under Absolute Maximum
Ratings may cause permanent damage to the device.
This is a stress rating only; functional operation of the
device at these or any other conditions above those
indicated in the operational section of this specication
is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device
reliability.
HMC820LP6CE
v06.1211
FRACTIONAL-N PLLs w/ INTEGRATED VCO
1095 - 1275, 2190 - 2550, 4380 - 5100 MHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
7 - 9
HMC820LP6CE
v06.1211
FRACTIONAL-N PLLs w/ INTEGRATED VCO
1095 - 1275, 2190 - 2550, 4380 - 5100 MHz
Evaluation PCB Schematic
The circuit board used in the application should use RF circuit design techniques. Signal lines should have
50 Ohm impedance while the package ground leads and exposed paddle should be connected directly
to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the
top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request.
To view this Evaluation PCB Schematic please visit www.hittite.com and choose HMC820LP6CE from the
“Search by Part Number” pull down menu to view the product splash page.
Evaluation PCB, fo & fo/2 Modes
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
7 - 10
Item Description
J1, J2 PCB Mount SMA RF Connector
J3 Dual Row Terminal Strip
J4 - J6 Connector Header
C1, C15 - C17, C25 10 µF Capacitor, 0805 Pkg.
C2, C3, C6, C7, C11, C12,
C14, C18, C27, C43, C45 0.47 µF Capacitor, 0402 Pkg.
C4, C13 22 pF Capacitor, 0402 Pkg.
C5, C33 1000 pF Capacitor, 0402 Pkg.
C8 1.5 pF Capacitor, 0402 Pkg.
C19 - C24, C28, C30, C32, C34 0.1 µF Capacitor, 0402 Pkg.
C26 1 µF Capacitor, 0603 Pkg.
C29 47 pF Capacitor, 0402 Pkg.
C35 3300 pF Capacitor, 0402 Pkg.
C36 270 pF Capacitor, 0402 Pkg.
C37, C38 68 pF Capacitor, 0402 Pkg.
C39 - C42, C44 4.7 µF Tantalum Capacitor, 0805 Pkg
R1, R2, R5, R8, R11, R15,
R18, R19, R21, R24 0 Ohm Resistor, 0402 Pkg.
R3, R4 1 Ohm Resistor, 0402 Pkg.
R6, R7 0 Ohm Resistor, 0805 Pkg.
R12, R20, R29 51 Ohm Resistor, 0402 Pkg.
R22, R25 20 kOhm Resistor, 0402 Pkg.
R26 - R28 1k Ohm Resistor, 0402 Pkg.
L1 3.9 nH Inductor, 0402 Pkg.
L2, L3 47 nH Inductor, 0402 Pkg.
TP3, TP4 Test Point PC Compact SMT
U1 HMC820LP6CE PLL with Integrated VCO
U2 HMC860LP3E
Low Noise Quad Linear Regulator
Y1 3.3V, 50 MHz VCXO Crystal Oscillator
PCB [2] 125998 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR and FR4
HMC820LP6CE
v06.1211
FRACTIONAL-N PLLs w/ INTEGRATED VCO
1095 - 1275, 2190 - 2550, 4380 - 5100 MHz
List of Materials for
Evaluation PCB 127825, fo & fo/2 Mode [1]
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
7 - 11
HMC820LP6CE
v06.1211
FRACTIONAL-N SYNTHESIZER w/ INTEGRATED VCO
1095 - 1275, 2190 - 2550, 4380 - 5100 MHz
Evaluation PCB Schematic
The circuit board used in the application should use RF circuit design techniques. Signal lines should have
50 Ohm impedance while the package ground leads and exposed paddle should be connected directly
to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the
top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request.
To view this Evaluation PCB Schematic please visit www.hittite.com and choose HMC820LP6CE from the
“Search by Part Number” pull down menu to view the product splash page.
Evaluation PCB, 2xfo Mode
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
7 - 12
Item Description
J1, J2 PCB Mount SMA RF Connector
J3 Dual Row Terminal Strip
J4 - J6 Connector Header
C1, C15 - C17, C25 10 uF Capacitor, 0805 Pkg.
C2, C3, C6, C7, C11, C12, C14,
C18, C27, C43, C45 0.47 uF Capacitor, 0402 Pkg.
C4, C13 22 pF Capacitor, 0402 Pkg.
C5, C33 0.001 uF Capacitor, 0402 Pkg.
C8 1.8 pF Capacitor, 0402 Pkg.
C19, C20 - C24, C28, C30, C32, C34 0.1 uF Capacitor, 0402 Pkg.
C26 1 uF Capacitor, 0603 Pkg.
C31 0.5 pF Capacitor, 0402 Pkg.
C35 0.0033 uF Capacitor, 0402 Pkg.
C36 270 pF Capacitor, 0402 Pkg.
C37, C38 68 pF Capacitor, 0402 Pkg.
C39 - C42, C44 4.7 uF Capacitor, 0805 Pkg.
C46 27 pF Capacitor, 0402 Pkg.
C47 47 pF Capacitor, 0402 Pkg.
R1, R2, R8, R11, R15, R18, R19, R21, R24 Zero Ohm Resistor, 0402 Pkg.
R3, R4 1 Ohm Resistor, 0402 Pkg.
R12, R20, R29 51 Ohm Resistor, 0402 Pkg.
R13, R14, R30 220 kOhm Resistor, 0402 Pkg.
R22, R25 20 kOhm Resistor, 0402 Pkg.
R26 - R28 1 kOhm Resistor, 0402 Pkg.
R31 Zero Ohm Resistor, 0201 Pkg.
R32, R33 Zero Ohm Resistor, 0805 Pkg.
L1 8.2 nH Inductor, 0402 Pkg.
L2, L3 47 nH Inductor, 0402 Pkg.
L4 Zero Ohm Resistor, 0402 Pkg.
TP1 - TP4 Test Point PC Compact SMT
U1 HMC820LP6CE PLL with Integrated VCO
U2 HMC860LP3E
Low Noise Quad Linear Regulator
Y1 3.3V, 50 MHz VCXO Crystal Oscillator
PCB [2] 127729 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR and FR4
HMC820LP6CE
v06.1211
FRACTIONAL-N SYNTHESIZER w/ INTEGRATED VCO
1095 - 1275, 2190 - 2550, 4380 - 5100 MHz
List of Materials for
Evaluation PCB 128157, 2xfo Mode [1]
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D