SPEC NO: DSAB3530 REV NO: V.10 D ATE: JUN/11/2007 P AGE: 1 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DR AWN: W.J.HUA
Package Dimensions
Part Number: KP-2012SEC SUPER BRIGHT ORANGE
Description
The Super Bright Orange device is made with InGaAlP (on
GaAs substrate) light emitting diode chip.
2.0x1.25mm SMD CHIP LED LAMP
Features
z2.0mmx1.25mm SMT LED,1.1mm THICKNESS.
zLOW POWER CONSUMPTION.
zWIDE VIEWING ANGLE.
zIDEAL FOR BACKLIGHT AND INDICAT OR.
zVARIOUS COLORS AND LENS TYPES AVAILABLE.
zPACKAGE : 2000PCS / REEL.
zMOISTURE SENSITIVITY LEVEL : LEVEL 3.
zRoHS COMPLIANT.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAB3530 REV NO: V.10 D ATE: JUN/11/2007 P AGE: 2 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DR AWN: W.J.HUA
Selection Guide
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
V
iewing
Angle [1]
Min. Typ. 2θ1/2
KP-2012SEC SUPER BRIGHT ORANGE (InGaAlP) WATER CLEAR 70 200 120°
Parameter Super Bright Orange Units
Power dissipation 75 mW
Forward Current 30 mA
Peak Forward Current [1] 195 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Symbol Parameter Device Typ. Max. Test Conditions Units
λpeak Peak Wavelength Super Bright Orange 610 nm IF=20mA
λD [1] Dominant Wavelength Super Bright Orange 601 nm IF=20mA
Δλ1/2 Spectral Line Half-width Super Bright Orange 29 nm IF=20mA
C Capacitance Super Bright Orange 30 pF VF=0V;f=1MHz
VF [2] Forward Voltage Super Bright Orange 2.0 2.5 V IF=20mA
IR Reverse Current Super Bright Orange 10 uA VR = 5V
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity / luminous flux: +/-15%.
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
SPEC NO: DSAB3530 REV NO: V.10 D ATE: JUN/11/2007 P AGE: 3 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DR AWN: W.J.HUA
Super Bright Orange KP-2012SEC
SPEC NO: DSAB3530 REV NO: V.10 D ATE: JUN/11/2007 P AGE: 4 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DR AWN: W.J.HUA
KP-2012SEC
Tape Specifications
(Units : mm)
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)