FEATURES:
Small dongle interfaces thru USB to PC
Automatic software upgrades via Internet
Field Programmable Dongle for
-ASxMB series – 2nd generation MEMS CMOS output
-ASxMPC series – Low Jitter MEMS CMOS output
-ASxMPLP series – Low Jitter MEMS LVPECL output
-ASxMPLV series – Low Jitter MEMS LVDS output
-ASxMPHC series – Low Jitter MEMS HCSL output
Socket Adapter cards supports:
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fAx 949-546-8001 | www.abracon.com
REVISION: 05/16/11
- ASxM series – 1st generation MEMS CMOS output
- 2.5 x 2.0 x 0.85 mm (Available for 1st and 2nd generation CMOS only)
- 3.2 x 2.5 x 0.85 mm (Available for Low Jitter, 1st and 2nd generation MEMS)
- 5.0 x 3.2 x 0.85 mm(Available for Low Jitter, 1st and 2nd generation MEMS)
- 7.0 x 5.0 x 0.85 mm(Available for Low Jitter, 1st and 2nd generation MEMS)
Programmer for PureSilicon™ Oscillators
The MEMSpeed Pro II programmer allows users to instantly program Abracon MEMS oscillators to a custom
frequency in seconds through a Microsoft Windows GUI program on a PC. Abracon MEMSpeed Pro II supports
CMOS, LVPECL, LVDS, and HCSL output MEMS oscillators in variety of package sizes. The oscillators can be
programmed over their respective frequency range in increments of 100Hz (up to four decimal point resolution).
a Windows based PC installation program. The MEMSpeed Pro II is used with device dependent socket adapter
cards and the appropriate package devices. (* Additional Socket Adapter is required for ASxM BLANK MEMS
oscillators. Please contact Abracon for details.)
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
REVISION: 05/16/11
Programmer Power Supply Supplied thru USB cable (micro USB to USB A)
Oscillator Operating Supply Voltage 1.8 to 3.6V
Programming Time 2 seconds
Operating System Supported
Programmer Size 2.50" x 1.25" x 0.50"
Programmer Weight 0.2 lb
ABRACON PART # KIT CONTENTS
ASVM- ADAPTER-KIT *
-
ASFLM- ADAPTER-KIT *
ASEM- ADAPTER-KIT *
ASDM- ADAPTER-KIT
ASVMPC- ADAPTER-KIT
ASFLMPC- ADAPTER-KIT
ASEMPC- ADAPTER-KIT
ASVMPLP- ADAPTER-KIT
ASFLMPLP- ADAPTER-KIT
ASEMPLP- ADAPTER-KIT
ASVMPLV- ADAPTER-KIT
ASFLMPLV- ADAPTER-KIT
ASEMPLV- ADAPTER-KIT
ASVMPHC- ADAPTER-KIT
ASFLMPHC- ADAPTER-KIT
ASEMPHC- ADAPTER-KIT
ABRACON PART # KIT CONTENTS
MEMSpeed Pro II
Kit includes MEMSPEED II programmer, USB cable, tweezers, Quick Start guide
and Installation USB Flash drive
MEMSPEEDPRO II SPECIFICATIONS
Socket Adapter Kits
Ordering Information
Kit includes 6 pin 7.0x5.0mm socket adapter and 5 unprogrammed 7.0X5.0mm
ASVMPC oscillators with ±25ppm over -40 to +85°C
Kit includes 6pin 5.0x3.2mm socket adapter and 5 unprogrammed 5.0X3.2mm
ASFLMPC oscillators with ±25ppm over -40 to +85°C
Kit includes 6 pin 3.2x2.5mm socket adapter and 5 unprogrammed 3.2X2.5mm
ASEMPC oscillators with ±25ppm over -40 to +85°C
Kit includes 6 pin 7.0x5.0mm socket adapter and 5 unprogrammed 7.0X5.0mm
ASVMPLP LVPECL oscillators with ±25ppm over -40 to +85°C
Kit includes 6pin 5.0x3.2mm socket adapter and 5 unprogrammed 5.0X3.2mm
ASFLMPLP LVPECL oscillators with ±25ppm over -40 to +85°C
Kit includes 6 pin 3.2x2.5mm socket adapter and 5 unprogrammed 3.2X2.5mm .
ASEMPLP LVPECL oscillators with ±25ppm over -40 to +85°C
Kit includes 6 pin 7.0x5.0mm socket adapter and 5 unprogrammed 7.0X5.0mm
ASVMPLV LVDS oscillators with ±25ppm over -40 to 85°C
Kit includes 6pin 5.0x3.2mm socket adapter and 5 unprogrammed 5.0X3.2mm.
ASFLMPLV LVDS oscillators with ±25ppm over -40 to +85°C
Kit includes 6 pin 3.2x2.5mm socket adapterand 5 unprogrammed 3.2X2.5mm
ASEMPLV LVDS oscillators with ±25ppm over -40 to +85°C
Kit includes 6 pin 7.0x5.0mm socket adapter and 5 unprogrammed 7.0X5.0mm
ASVMPHC HCSL oscillators with ±25ppm over -40 to +85°C
Kit includes 6pin 5.0x3.2mm socket adapter and 5 unprogrammed 5.0X3.2mm
ASFLMPHC HCSL oscillators with ±25ppm over -40 to +85°C
Kit includes 6 pin 3.2x2.5mm socket adapter and 5 unprogrammed 3.2X2.5mm
.
ASEMPHC HCSL oscillators with ±25ppm over -40 to +85°C
Kit includes 4 pin 7.0x5.0mm socket adapter and 50 unprogrammed 7.0X5.0mm
ASVM oscillators with ±25ppm over -40 to +85°C
Kit includes 4 pin 5.0x3.2mm socket adapter and 50 unprogrammed 5.0X3.2mm
ASFLM oscillators with ±25ppm over -40 to +85°C
Kit includes 4 pin 3.2x2.5mm socket adapter and 50 unprogrammed 3.2X2.5mm
ASEM oscillators with ±25ppm over -40 to +85°C
Kit includes 4 pin 2.5x2.0mm socket adapter and 50 unprogrammed 2.5X2.0mm
ASDM oscillators with ±25ppm over -40 to +85°C
ASVMB-ADAPTER-KIT
ASFLMB- ADAPTER-KIT
ASEMB- ADAPTER-KIT
ASDMB- ADAPTER-KIT
Kit includes 4 pin 7.0x5.0mm socket adapter and 50 unprogrammed 7.0X5.0mm
ASVMB oscillators with ±25ppm over -40 to +85°C
Kit includes 4 pin 5.0x3.2mm socket adapter and 50 unprogrammed 5.0X3.2mm
ASFLMB oscillators with ±25ppm over -40 to +85°C
Kit includes 4 pin 3.2x2.5mm socket adapter and 50 unprogrammed 3.2X2.5mm
ASEMB oscillators with ±25ppm over -40 to +85°C
Kit includes 4 pin 2.5x2.0mm socket adapter and 50 unprogrammed 2.5X2.0mm
ASDMB oscillators with ±25ppm over -40 to +85°
* The Socket Adapters for MEMSpeed Pro II are used for 1st generation ASxM BLANK MEMS oscillators. Please contact Abracon for details.
For programming of devices, a MEMSpeed Pro II programmer and an appropriate adapter card kit are required.
*
Programmer for PureSilicon™ Oscillators
MS Windows, XP: 32bit version
Vista, and Windows 7: 32 or 64 bit