BZW50
Series
TRANSIENT VOLTAGE
SUPPRESSOR
Stand-off Zener Voltage: 10 - 180 Volts
Peak Power: 5000 Watts
FEATURES :
* 5000W (10/1000µs) Peak Pulse Power
* Excellent clamping capability
* Low incremental surge resistance
* Fast response time : typically less
then 1.0 ps from 0 volt to VBR(min.)
* Pb / RoHS Free
MECHANICAL DATA
* Case : Molded plastic body
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
Method 208 guaranteed
* Polarity : Color band denotes cathode end
* Mounting position : Any
* Weight : 2.1 grams
MAXIMUM RATINGS
Rating at 25 °C ambient temperature unless otherwise specified.
RatingSymbolValueUnit
Peak pulse power dissipation (1) , TJ initial = Ta W
Power dissipation on infinite heat sink , Ta = 75ºCW
Non repetitive surge peak forward current
for unidirectional type , tp = 10 ms ,TJ initial = Ta
Maximum lead temperature for soldering during 10s
at 5mm from case
Thermal resistance junction to lead ºC/W
Thermal resistance junction to ambient, L = 10mmºC/W
Operating and storage temperature range TJ, TSTG - 65 to + 175 °C
Note:
(1) For surge greater than the maximum values, the diode will fail in short-circuit.
Page 1 of 3Rev. 02 : March 25, 2005
TL230ºC
RθJA 65
RθJL 15
A
PD
PPK 5000
6.5
IFSM 500
0.360 (9.1)
0.340 (8.6)
D
6
0.360 (9.1)
0.340 (8.6)
0.052 (1.32)
0.048 (1.22)
Dimensions in inches and ( millimeters )
1.00 (25.4)
MIN.
1.00 (25.4)
MIN.
ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specified
Breakdown voltage
α
T
C
(Note 1)maxtyp
VBR @ IR VCL @ IPP (Note 2)(Note 3)
UnidirectionalBidirectionalmin (V)max (V)(mA)(µA)(V)max (V)(A) 10-4/ºC (pF)
BZW50-10 BZW50-10B 11.113.61.05.01018.82667.824000
BZW50-12 BZW50-12B 13.316.31.05.01222.02278.418500
BZW50-15 BZW50-15B 16.620.41.05.01526.91868.813500
BZW50-18 BZW50-18B 20.024.41.05.01832.21559.21150
BZW50-22 BZW50-22B 24.429.81.05.02239.41279.68500
BZW50-27 BZW50-27B 30.036.61.05.02748.3103.9.87000
BZW50-33 BZW50-33B 36.644.71.05.03359.085105750
BZW50-39 BZW50-39B 43.353.01.05.03969.47210.14800
BZW50-47 BZW50-47B 52.063.61.05.04783.260.110.34100
BZW50-56 BZW50-56B 62.276.01.05.05699.65010.43400
BZW50-68 BZW50-68B 75.692.41.05.0681214110.53000
BZW50-82 BZW50-82B 91.01111.05.0821453410.62600
BZW50-100 BZW50-100B 1111361.05.01001792810.72300
BZW50-120 BZW50-120B 1331631.05.01202152310.81900
BZW50-150 BZW50-150B 1662041.05.01502691910.81700
BZW50-180 BZW50-180B 2002441.05.01803221610.81500
Notes:
(1) Pulse test : tp < 50 ms.
(2) Δ VBR = αT * (Ta - 25) * VBR (25ºC)
(3) VR = 0V, f = 1MHz. For Bidirectional types, capacitance value is divided by 2.
Page 2 of 3Rev. 02 : March 25, 2005
Type No. Clamping voltage
10/1000 µs
current @ VRM
IRM @ VRM
Max. Leakage
RATING AND CHARACTERISTIC CURVES ( BZW50 SERIES )
FIG.1 - PULSE DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE
PEAK FORWARD SURGE CURRENT
0255075100125150175
Ta, AMBIENT TEMPERATURE, ( °C) NUMBER OF CYCLES AT 60Hz
FIG.3 - STEADY STATE POWER DERATINGFIG.4 - PEAK PULSE POWER RATING CURVE
FIG.5 - PULSE WAVEFORM
01.02.03.04.0
Page 3 of 3Rev. 02 : March 25, 2005
80
60
40
20
120
8
400
0
600
0
300
200
100
2
6
0
4
tp, PULSE WIDTH (ms)
PEAK FORW ARD SURGE
CURRENT, AMPERES
PEAK PULSE POWER OR CURRENT
DERATING IN PERCENTAGE, %
PPK , PEAK POW ER (WATTS)
100 500
10
20
60
1
2
4
6
40
100
1001251750255075150 0.0010.010.11 100
10
200
TL, LEAD TEMPERATURE (°C)
PD, STEADY STATE POWER DISSIPATION
(WATTS)
50
100
0
tr = 10µs
Peak Value
IPPM
Ta=25 °C
Pulse Width (td) is defined
as that point where the peak
current decays to 50%
of IPPM
tp
10x1000 µs Waveform
as defined by R.E.A.
Half Value - IPPM
2
T, TIME(ms)
PEAK PULSE CURRENT - % IPPM
1E7
1E6
1E5
1E4
1E3
1E2
Exponential waveform
Peak Power
(on printed circuit)
Average Power
(on infinite heatsink)
L = 10mm