ATC 550S SerieS ubCTM CAPACiTOrS
Electrical Specifications:
• Capacitance: 100 nF
• Rated Voltage:
50 WVDC
• Dielectric Withstanding Voltage (DWV):
250% of rated WVDC for 5 secs.
• Operating Temperature Range:
-55°C to +125°C
• Temperature Coefficient of Capacitance (TCC):
±15% (-55°C to +125°C)
• Insulation Resistance:
1010 Ω min. @ +25°C @ rated WVDC
109 Ω min. @ +125°C @ rated WVDC
W
L
T
G
Mechanical Dimensions
For additional information and catalogs contact your ATC
representative or call direct at (+1-631) 622-4700.
Consult factory for additional performance data.
ATC accepts orders for our parts using designations with or without the
“ATC” prefix. Both methods of defining the part number are equivalent,
i.e., part numbers referenced with the “ATC” prefix are interchangeable
to parts referenced without the “ATC” prefix. Customers are free to use
either in specifying or procuring parts from American Technical Ceramics.
Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. A 10/03).
Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC’s website at www.atceramics.com/productfinder/default.asp. Click on the link for
Terms and Conditions of Sale.
ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties
which may result from its use. ATC reserves the right to revise the content or modify its product line without prior notice.
© 2009 American Technical Ceramics Corp. All Rights Reserved. ATC # 001-1128 Rev. C; 5/14
The above part number refers to a 550 Series (case size S) 100 nF capacitor,
M tolerance (±20%), with T termination (Tin Plated over Nickel Barrier), tape and reel packaging.
ATC PART NUMBER CODE
ATC 550 S 104 M T T
Series
Case Size: (0603) Tape and Reel (standard)*
Capacitance Code: Termination Code
First 2 significant digits for capacitance T = Tin Plated over Nickel Barrier
R=Decimal Point (Standard)
Capacitance Tolerance
M = 20%
*500, 1000, 4000 pieces on 7” reel
L = Length 0.062’’ +0.002’’ -0.006’’ (1.57mm +0.051mm -0.152mm)
W = Width 0.032’’ +0.006’’ -0.002’’ (0.81mm +0.152mm -0.051mm)
T = Thickness 0.035’’ +0.003’’ -0.005’’ (0.89mm +0.076mm -0.127mm)
G = Gap 0.007’’ ±0.002 (0.178mm ±0.051)