3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering inform at io n call
800-225-5373
3M™ Mini D Ribbon (MDR) Cable Assembly
.050″ High Speed Video Data Transmission System, 50 Position 14X50-SZWB-XXX-0NC
Physical
Electrical
Environmental
*RoHS = Directive 2002/95/EC, Restrict ion of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
"RoHS compliant" mea ns that the product or part does not contain any of the following substances in exce ss of the following maximum con centration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated bi phenyls or prolybromiant ed diphenyl ethers; or (b) 0.01% (by weight ) for cadmium. Unless other wise stated b y 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
Channel Link is a trademark of National Se miconductor.
Connector Contact Plating
Wiping Area: 30μ″ [ 0.76μm ] Min. Gold
Shell
Color: Beige
Material: Acrylonitrile Butadiene Styrene (ABS)
Cable
Color: Beige
Jacket Material: Polyvinyl Chloride (PVC)
Flammability: AWM VW-1
Voltage Rating: 30 V
Current Rating: 1 A
Insulation Resistance: > 1 × 108Ω at @100 Vdc
Withstanding Voltage: 350 Vrms for 1 minute
Individually Shielded Twisted Pairs
Characteristic Impedance: 100 ± 10Ω
Conductor Size : 28 AWG Stranded
Propogation Velocity: 1.25 ns/ft [4.1 ns/m ]
Temperature Rating: -20°C to +75°C
TS-2103-03
Sheet 1 of 4
• Supports LVDS Channel Link™ signaling
• 20 shielded pairs (100 ohm) +4 drains for
high bandwidth applicatio ns
• High density 50 position MDR with rugged
ribbon type contact
• 3 Unshielded Twisted 28 AWG Pairs
• EMI shielded junction shell in either plastic
or over-molded construction
• Rugged thumbscrew retention
• RoHS* compliant
Date Modified: May 12, 20 06
UL File No.: E86982
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
123456
2627
7891011
12
13
14
15
16
17
18
1920
21
22
23
24
25
2829
3031
3233
3435
3637
3839
4041
4243
4445
4647
4849
50
15.5
0.6
54.9
2.2
46.5
1.8
2X Thumbsc rew
#4-40 t hr ead 2X Thumbscrew
#4-40 thread
50 Pos it ion
Hi gh Density
Mi ni D Ribbon
(MDR) Male Plug
50 Position
Hi gh Dens it y
Mini D Ribbon
(MDR) Male Plu g
Cable
(See pinout for
cable constru c t ion)
(Se e or dering infor ma ti on)
LENGTH
45.7
1.8 45.7
1.8
Over-Molded #4-40 Thumbscrew
3M™ Mini D Ribbon (MDR) Cable Assembly
.050″ High Speed Video Data Transmission System, 50 Position 14X50-SZWB-XXX-0NC
Ordering Information
14X50-SZWB-XXX-0NC
Length:
100 = 1.0 meters
200 = 2.0 meters
500 = 5.0 meters TS-2103-03
Sheet 2 of 4
Backshell Options:
T = Over-molded 4-40 thumbscrew
B = Discrete 4-40 thumbscrew shell kit
Generic End Detail
MDR 50 Position Plug
( Both Ends )
[Inch]
Tolerance Unless Noted
mm
mm
[ ] Dimensions for
Reference only
± .10
± .1
0.00
0.0
Assembly Length Tolerance
Cable Length:
0.5 to 1.5 meters -0 + .05 meters
2 to 10 meters -0 +3% of length
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Cable Assembly
.050″ High Speed Video Data Transmission System, 50 Position 14X50-SZWB-XXX-0NC
Generic End Detail
MDR 50 Position Plug
( Both Ends )
Note:1. Use 3341-31 jacksocket for mounting receptacle to panel.TS-2103-03
Sheet 3 of 4
[Inch]
Tolerance Unless Noted
mm
mm
[ ] Dimensions for
Reference only
± .10
± .1
0.00
0.0
123456
2627
78910
11
12
13
14
15
16
17
18
1920
21
22
23
24
25
2829
3031
3233
3435
3637
3839
4041
4243
4445
4647
4849
50
13.0
0.5
54.4
2.1
46.5
1.8
2X Thu mbsc rew
#4-40 thread 2X Thumbsc r ew
#4-40 thread
50 Position
High Dens ity
Mini D Ribbon
(MDR) Male Plug
50 Position
High Density
M ini D Ri bbon
(MDR) Male Plug
Cable
(See pinou t f or
cable const r uc t ion)
(See ordering information)
32.5
1.3 LENGTH 32.5
1.3
Discrete #4-40 Thumbscrew
Assembly Length Tolerance
Cable Length:
0.5 to 1.5 meters -0 + .05 meters
2 to 10 meters -0 +3% of length
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Cable Assembly
.050″ High Speed Video Data Transmission System, 50 Position 14X50-SZWB-XXX-0NC
MDR 50 Position Pinout (F50-13)
P1 P2
Pair Signal Position Position Signal Pair Pair Signal Position Position Signal Pair
1 A0M 1 38 DDC Gnd TP2 1 A0M 1 38 DDC Gnd TP2
1 A0P 26 14 DDC SCL TP2 1 A0P 26 14 DDC SCL TP2
2 A1M 2 39 DDC SDA TP3 2 A1M 2 39 DDC SDA TP3
2 A1P 27 15 A8M 11 2 A1P 27 15 A8M 11
3 A2M 3 40 A8P 11 3 A2M 3 40 A8P 11
3 A2P 28 16 A9M 12 3 A2P 28 16 A9M 12
4 CLK1M 4 41 A9P 12 4 CLK1M 4 41 A9P 12
4 CLK1P 29 17 A10M 13 4 CLK1P 29 17 A10M 13
5 A3M 5 42 A10P 13 5 A3M 5 42 A10P 13
5 A3P 30 18 CLK3M 14 5 A3P 30 18 CLK3M 14
N/A Shield 1 6 43 CLK3P 14 N/A Shield 1 6 43 CLK3P 14
N/A Shield 1 31 19 A11M 15 N/A Shield 1 31 19 A11M 15
6 A4M 7 44 A11P 15 6 A4M 7 44 A11P 15
6 A4P 32 20 Shield 4 N/A 6 A4P 32 20 Shield 4 N/A
7 A5M 8 45 Shield 3 N/A 7 A5M 8 45 Shield 3 N/A
7 A5P 33 21 A12M 16 7 A5P 33 21 A12M 16
8 A6M 9 46 A12P 16 8 A6M 9 46 A12P 16
8 A6P 34 22 A13M 17 8 A6P 34 22 A13M 17
9 A7M 10 47 A13P 17 9 A7M 10 47 A13P 17
9 A7P 35 23 A14M 18 9 A7P 35 23 A14M 18
10 CLK2M 11 48 A14P 18 10 CLK2M 11 48 A14P 18
10 CLK2P 36 24 A15M 19 10 CLK2P 36 24 A15M 19
TP1 twpr- 12 49 A15P 19 TP1 twpr- 12 49 A15P 19
TP1 twpr+ 37 25 CLK4M 20 TP1 twpr+ 37 25 CLK4M 20
TP3 DDC+5V 13 50 CLK4P 20 TP3 DDC+5V 13 50 CLK4P 20
Notes:
1. All pairs are individuall y shielded with aluminum foil.
2. Pair shields are wrapped Aluminum out and in contact with six internal drains (lo gic ground).
3. Outer braid and foil (chassis ground) is isolated from inner dr ains (logic ground).
TS-2103-03
Sheet 4 of 4
3
Printed in USA.
Minimum 10%
Post-Consumer Fiber
Important Notice
All statements, technical information, and recommendations
related to 3M’s products are based on information believed to be
reliable, but the accuracy or completeness is not guaranteed.
Before using this product, you must evaluate it and determine if it
is suitable for your intended application. You assume all risks and
liability associated with such use. Any statements related to the
product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall
have no force or effect unless expressly agreed upon, in writing,
by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and
manufacture for a period of one (1) year from the time of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. If this product is defective within the warranty period
stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of
the 3M product. Except where prohibited by law, 3M will not
be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3M Electronics
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
www.3M.com/electronics © 3M 2006
