I-4 APEMwww.apem.com
I
Switch guards
For switch series 12000 - 3500 - 600H - 6000
With standard bushing
Switch guards prevent accidental lever operation.
When the guard is raised, the lever can be operated freely.
When the guard is fully depressed, the lever is reset/locked in a stable position.
They are designed for use on switches with Ø 11,9 (.468) or Ø 12 (.472) threaded
bushing and lever length 17,5 (.688) outside bushing.
Note : For correct switch operation, the switch guard should be adjusted properly by
means of 2 nuts.
Series 30 - for 3-position switches
• Lever returned then locked in upper position
Series 20 - for 2-position switches
• Lever returned then locked in down position (OFF)
MATERIALS
• Support plate : matt black steel
• Cap : thermoset or thermoplastic
(20PN, 200PN, 300PN)
Model No Colour
22 Grey
23 White
24 Orange
25 Black
26 Red
27 Green
28 Yellow
29 Blue
25/28 Black/yellow striped
Model No Colour
32 Grey
33 White
34 Orange
35 Black
36 Red
37 Green
38 Yellow
39 Blue
35/38 Black/yellow striped
MODEL
STRUCTURE
On this model, holes for wiring a seal are standard.
The company reserves the right to change specifications without notice.
03-Switch guards-A_03-Security caps-A 06/11/14 15:08 Page4