LM105/LM305/LM305A
Voltage Regulators
General Description
The LM105 series are positive voltage regulators similar to
the LM100, except that an extra gain stage has been added
for improved regulation.Aredesign of the biasing circuitry re-
moves any minimum load current requirement and at the
same time reduces standby current drain, permitting higher
voltage operation. They are direct, plug-in replacements for
the LM100 in both linear and switching regulator circuits with
output voltages greater than 4.5V. Important characteristics
of the circuits are:
•Output voltage adjustable from 4.5V to 40V
•Output currents in excess of 10A possible by adding ex-
ternal transistors
•Load regulation better than 0.1%, full load with current
limiting
•DC line regulation guaranteed at 0.03%/V
•Ripple rejection on 0.01%V
•45 mA output current without external pass transistor
(LM305A)
Like the LM100, they also feature fast response to both load
and line transients, freedom from oscillations with varying re-
sistive and reactive loads and the ability to start reliably on
any load within rating. The circuits are built on a single silicon
chip and are supplied in a TO-99 metal can.
The LM105 is specified for operation for −55˚C ≤T
A
≤
+125˚C, and the LM305/LM305A is specified for 0˚C ≤T
A
≤
+70˚C.
Schematic and Connection Diagrams
DS007755-1
Metal Can Package
DS007755-3
Top View
Order Number LM105H, LM105H/883,
SMD #5962-8958801, LM305H or LM305AH
See NS Package Number H08C
June 1999
LM105/LM305/LM305A Voltage Regulators
© 1999 National Semiconductor Corporation DS007755 www.national.com
Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
(Note 5)
LM105 LM305 LM305A
Input Voltage 50V 40V 50V
Input-Output Differential 40V 40V 40V
Power Dissipation (Note 1) 800 mW 800 mW 800 mW
Operating Temperature Range −55˚C to +125˚C 0˚C to +70˚C 0˚C to +70˚C
Storage Temperature Range −65˚C to +150˚C 65˚C to +150˚C −65˚C to +150˚C
Lead Temperature (Soldering, 10 seconds) 300˚C 300˚C 300˚C
Electrical Characteristics (Note 2)
Parameter Conditions LM105 LM305 LM305A Units
Min Typ Max Min Typ Max Min Typ Max
Input Voltage Range 8.5 50 8.5 40 8.5 50 V
Output Voltage Range 4.5 40 4.5 30 4.5 40 V
Input-Output Voltage 3.0 30 3.0 30 3.0 30 V
Differential
Load Regulation R
SC
=10Ω,T
A
=25˚C 0.02 0.05 0.02 0.05 %
(Note 3) R
SC
=10Ω,T
A
=T
A(MAX)
0.03 0.1 0.03 0.1 %
R
SC
=10Ω,T
A
=T
A(MIN)
0.03 0.1 0.03 0.1 %
0≤I
O
≤12 mA 0 ≤I
O
≤12 mA
R
SC
=0Ω,T
A
=25˚C 0.02 0.2 %
R
SC
=0Ω,T
A
=70˚C 0.03 0.4 %
R
SC
=0Ω,T
A
=0˚C 0.03 0.4 %
0≤I
O
≤45 mA
Line Regulation T
A
=25˚C %/V
0˚C ≤T
A
≤+70˚C %/V
V
IN
−V
OUT
≤5V, T
A
=25˚C 0.025 0.06 0.025 0.06 0.025 0.06 %/V
V
IN
−V
OUT
≥5V, T
A
=25˚C 0.015 0.03 0.015 0.03 0.015 0.03 %/V
Temperature Stability T
A(MIN)
≤T
A
≤T
A(MAX)
0.3 1.0 0.3 1.0 0.3 1.0 %
Feedback Sense
Voltage 1.63 1.7 1.81 1.63 1.7 1.81 1.55 1.7 1.85 V
Output Noise Voltage 10 Hz ≤f≤10 kHz
C
REF
=0 0.005 0.005 0.005 %
C
REF
=0.1 µF 0.002 0.002 0.002 %
Standby Current Drain V
IN
=30V, T
A
=25˚C mA
V
IN
=40V 0.8 2.0 mA
V
IN
=50V 0.8 2.0 0.8 2.0 mA
Current Limit T
A
=25˚C, R
SC
=10Ω, 225 300 375 225 300 375 225 300 375 mV
Sense Voltage V
OUT
=0V, (Note 4)
Long Term Stability 0.1 0.1 0.1 %
Ripple Rejection C
REF
=10 µF, f =120 Hz 0.003 0.003 0.003 %/V
θ
JA
TO-99 Board Mount 230 230 230 ˚C/W
in Still Air
θ
JA
TO-99 Board Mount in 92 92 92 ˚C/W
400 LF/Min Air Flow
θ
JC
TO-99 25 25 25 ˚C/W
www.national.com 2
Electrical Characteristics (Note 2) (Continued)
Note 1: The maximum junction temperature of the LM105 and LM305A is 150˚C, and the LM305 is 85˚C. For operation at elevated temperatures, devices in the
H08C package must be derated based on a thermal resistance of 168˚C/W junction to ambient, or 25˚C/W junction to case. Peak dissipations to 1W are allowable
providing the dissipation rating is not exceeded with the power average over a five second interval for the LM105 and averaged over a two second interval for the
LM305.
Note 2: Unless otherwise specified, these specifications apply for temperatures within the operating temperature range, for input and output voltages within the
range given, and for a divider impedance seen by the feedback terminal of 2 kΩ. Load and line regulation specifications are for a constant junction temperature. Tem-
perature drift effects must be taken into account separately when the unit is operating under conditions of high dissipation.
Note 3: The output currents given, as well as the load regulation, can be increased by the addition of external transistors. The improvement factor will be roughly
equal to the composite current gain of the added transistors.
Note 4: With no external pass transistor.
Note 5: Refer to RETS105X Drawing for military specifications for the LM105.
Typical Performance Characteristics
Load Regulation
DS007755-15
Load Regulation
DS007755-16
Current Limiting
Characteristics
DS007755-17
Current Limit Sense Voltage
DS007755-18
Short Circuit Current
DS007755-19
Optimum Divider Resistance
Values
DS007755-20
Minimum Input Voltage
DS007755-21
Regulator Dropout Voltage
DS007755-22
Supply Voltage Rejection
DS007755-23
www.national.com3
Typical Performance Characteristics (Continued)
Typical Applications
Minimum Output Voltage
DS007755-24
Standby Current Drain
DS007755-25
Transient Response
DS007755-26
10A Regulator with Foldback Current Limiting
DS007755-4
†Solid tantalum.
*Electrolytic
1.0A Regulator with Protective Diodes
DS007755-5
†Protects against shorted input or inductive leads on unregulated supply.
*Protects against input voltage reversal.
††Protects against output voltage reversal.
www.national.com 4
Typical Applications (Continued)
Linear Regulator with Foldback Current Limiting
DS007755-8
Current Regulator
DS007755-9
Shunt Regulator
DS007755-10
Switching Regulator
DS007755-11
†Solid tantaium.
††125 turns =22 on Arnold
Engineering A262123-2 molybdenum permally core.
Basic Positive Regulator with Current Limiting
DS007755-12
www.national.com5
Typical Applications (Continued)
1.0A Regulator with Protective Diodes
DS007755-13
†Protects against shorted input or inductive loads on unregulated supply.
*Protects against input voltage reversal.
††Protects against output voltage reversal.
Linear Regulator with Foldback Current Limiting
DS007755-14
www.national.com 6
Physical Dimensions inches (millimeters) unless otherwise noted
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
National Semiconductor
Corporation
Americas
Tel: 1-800-272-9959
Fax: 1-800-737-7018
Email: support@nsc.com
National Semiconductor
Europe Fax: +49 (0) 1 80-530 85 86
Email: europe.support@nsc.com
Deutsch Tel: +49 (0) 1 80-530 85 85
English Tel: +49 (0) 1 80-532 78 32
Français Tel: +49 (0) 1 80-532 93 58
Italiano Tel: +49 (0) 1 80-534 16 80
National Semiconductor
Asia Pacific Customer
Response Group
Tel: 65-2544466
Fax: 65-2504466
Email: sea.support@nsc.com
National Semiconductor
Japan Ltd.
Tel: 81-3-5639-7560
Fax: 81-3-5639-7507
www.national.com
Metal Can Package (H)
Order Number LM105H, LM105H/883, SMD #5962-8958801, LM305H or LM305AH
NS Package Number H08C
LM105/LM305/LM305A Voltage Regulators
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
