Data Sheet 35XP-A Digital Multimeter A compact, full-featured digital multimeter for plant maintenance, HVAC, electrical and electronic applications. Temperature No hassle warranty No waiting. No shipping charges. measurement Capability to 1000 C/1832 F (Type K thermocouple included) 750 V AC/1000 V DC--highest voltage rating in this class of meter Capacitance for motor run/start test 0.1 A resolution for flame sensor testing Frequency to 1 MHz Resistance to 40 MW Data Hold freezes display Magne-GripTM holster VolTectTM non-contact voltage detector Triple safety ratings Our commitment to high-quality products and customer service is demonstrated by our industry exclusive "No Hassle" warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot. 35XP-A (note: $500 MSLP limit) CAT 1000V Amprobe(R) Test Tools 600V 300V www.Amprobe.com 35XP-A Digital Multimeter Data Sheet General Specifications Display Polarity Overrange Zero Low Battery Indication Auto Power Off Measurement Rate Operating Environment Storage Temperature Accuracy Temperature Coefficient Altitude Power Battery Life Dimensions (H x W x D) Weight Warranty 3-3/4 digit liquid crystal display (LCD) with a maximum reading of 3999 Automatic, positive implied, negative polarity indication (OL) or (-OL) is displayed Automatic The "M" is displayed when the battery voltage drops below the operating level Approx. 10 minutes 2 times per second, nominal 0 C to 50 C at <70 % R.H. -20 C to 60 C, 0 to 80 % R.H. with battery removed from meter Stated accuracy at 23 C 5 C, <75 % relative humidity 0.1 x (specified accuracy) per C (0 C to 18 C, 28 C to 50 C) 2000 m Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22 150 hours typical with carbon-zinc, 300 hours typical with alkaline 155 mm x 72 mm x 32 mm Approx. 400 g including battery One-year Specifications Function Voltage DC Volts Ranges AC Volts (45 Hz to 500 Hz) Ranges Resolution Input Impedance Overload Protection Current DC Current Ranges AC Current (45 Hz to 500 Hz) Ranges Resolution Input Protection Burden Voltage Resistance Resolution Open Circuit Voltage Overload Protection Amprobe(R) Test Tools Range Accuracy 400 mV, 4 V, 40 V, 400 V, 1000 V (0.5 % rdg + 1 dgt) 400 mV (45 Hz to 100 Hz) 4 V, 40 V, 400 V, 750 V 100 V 400 mV: >100 MW; 4 V: 10 MW; 40 V to 1000 V: 9.1 MW 1000 V DC or 750 V AC RMS (1.5 % rdg + 5 dgts) (1.5 % rdg + 5 dgts) 400 A, 4000 A, 40 mA, 400 mA 2A (1.0 % rdg + 2 dgt) (2.0 % rdg + 3 dgts) 400 A, 4000 A, 40 mA, 400 mA (1.5 % rdg + 5 dgts) 2A (2.5 % rdg + 5 dgts) 0.1 A 2 A/1000 V fast blow ceramic fuse 6.3 mm x 32 mm on A input 500 mV max. (2 V max. on 4 mA, 400 mA ranges) 400 W, 4 kW, 40 kW, 400 kW, 4 MW (1.0 % rdg + 4 dgts) 40 MW (2.0 % rdg + 5 dgts) 100 mW -0.45 V DC typical, (-1.2 V DC on 400 W range) 1000 V DC or 750 V AC RMS www.Amprobe.com 35XP-A Digital Multimeter Data Sheet Specifications, cont. Function Range Accuracy Capacitance 4 nF, 40 nF, 400 nF, 4 F (5.0 % rdg + 30 dgts) 40 uF, 400 uF (5.0 % rdg + 5 dgts) 4 mF (5.0 % rdg + 15 dgts) Resolution 1 pF Test Voltage <1V Test Frequency 1.3 Hz on 4 nF to 40 F ranges, 0.7 Hz on 400 F, 4 mF ranges Input Protection 2 A/1000 V fast blow ceramic fuse 6.3 mm x 32 mm on A input Temperature 400 C, 1000 C, 400 F, 1832 F -20 C to 10 C (2.0 % rdg + 4 C) 10 C to 200 C (1.0 % rdg + 3 C) 200 C to 1000 C (3.0 % rdg + 2 C) -4 F to 50 F (2.0 % rdg + 8 F) 50 F to 400 F (1.0 % rdg + 6 F) 400 F to 1832 F (3.0 % rdg + 4 F) Resolution 0.1 C, 0.1 F Overload Protection 1000 V DC or 750 V AC RMS 1000 V 600 V 300 V Frequency 4 k, 40 k, 400 k, 1 M (0.1 % rdg + 3 dgts) Resolution 1 Hz Sensitivity 10 Hz to 1 MHz: >2.5 V rms Minimum Pulse Width > 25 ns Duty Cycle Limits > 30 % and < 70 % Overload Protection 1000 V DC or 750 V AC RMS Continuity Audible Indication Less than 25 W Response Time 100 ms Overload Protection 1000 VDC or 750 VAC rms Diode Test Test Current 1.2 mA (approximate) (1.5 % rdg + 3 dgts) Resolution 1 mV Open Circuit Voltage 3.0 DC typical Overload Protection 1000 V DC or 750 V AC RMS Non-Contact Voltage Indicator Sense voltage 70 V to 600 V AC beeper chirps and big bright red LED comes on, works on all ranges www.Amprobe.com Data Sheet 35XP-A Digital Multimeter Included Accessories Pair of test leads (TL245A), K-type thermocouple (TP255A), temperature adapter (XR-TA), fuse 2 A/ 1000 V (P/N FP200), 9 V battery (installed), Magne-GripTM Holster with magnetic hanging strap (H2-XR) and users manual. Optional Accessories VC30A Carrying Case DL243D Test Lead Kit Amprobe(R) Test Tools website: www.Amprobe.com email: info@amprobe.com Everett, WA 98203 tel: 877-AMPROBE Amprobe(R) Test Tools Europe In den Engematten 14 79286 Glottertal, Germany Tel.: +49 (0) 7684 8009 - 0 (c)2007 Amprobe Test Tools. All rights reserved. 9/2007 2123441 D-US-N Rev C Amprobe(R) Test Tools www.Amprobe.com