DC-DC
Specification
6 Watts
•4:1 Input Range
•DIP-24 Plastic Case
•Operating Temperature -40 °C to +100 °C
•Single & Dual Outputs
•Optional Metal Case
•1500 VDC Isolation, 3000 VDC Option
•3 Year Warranty
JTE Series
Input
Input Voltage Range • 24 V (9-36 VDC)
48 V (18-75 VDC)
Input Current • See table
Input Filter • Pi network
Input Reflected Ripple • 20 mA pk-pk through 12 µH inductor
and 4.7 µF capacitor
Input Surge • 24 V models 50 VDC for 100 ms
48 V models 100 VDC for 100 ms
Under Voltage Lockout • 24 V models on >8.5 V, off <8.0 V
48 V models on >16.5 V, off <15.5 V
Output
Output Voltage • See table
Output Voltage Balance • ±2% max, dual output models
Initial Set Accuracy • ±2% max
Minimum Load • No minimum load required
Line Regulation • ±0.5% max
Load Regulation • ±1.2% max for single output and
±5% max for dual output from 10-100%
Cross Regulation • ±5% max on dual output models
(see note 4)
Start Up Delay • 20 ms typical
Ripple & Noise • 80 mV pk-pk (100 mV for D24 models),
20 MHz bandwidth (see note 5)
Transient Response • <3% max deviation, recovery to within 1%
in 300 µs for a 25% load change (4%
max. deviation for S3V3 models)
Overload Protection • 135% - 185% of Full Load
Short Circuit Protection • Trip & restart (Hiccup mode),
auto recovery
Maximum Capacitive • See table
Load
Temperature • ±0.02/°C max
Coefficient
xppower.com
General
Efficiency • See table
Isolation Voltage • 1500 VDC Input to Output, for optional
high isolation version 3000 VDC input to
output add suffix ‘-H’ to model number
1000 VDC Input to Case
1000 VDC Output to Case
Isolation Capacitance • 1000 pF typical input to output
Isolation Resistance • 109Ω
Switching Frequency • 330 kHz typical
Power Density • 15 W/in3
MTBF • >800 kHrs to MIL-HDBK-217F
at 25 °C, GB
Environmental
Operating Temperature • -40 °C to +100 °C, derate from 100% load
at +60 °C to no load at +100 °C
Case Temperature • +100 °C max
Storage Temperature • -55 °C to +125 °C
Cooling • Natural convection
Operating Humidity • Up to 95%, non-condensing
EMC
Emissions • EN55022 class A conducted
ESD Immunity • EN61000-4-2, Level 3
8 kV air discharge Perf Criteria B,
6 kV contact discharge Perf Criteria B
Radiated immunity • EN61000-4-3, 10 V/m, Perf Criteria A
EFT/Burst • EN61000-4-4, level 3, Perf Criteria A*
Surge • EN61000-4-5, level 2, Perf Criteria A*
Conducted Immunity • EN61000-4-6, 10 Vrms, Perf Criteria A
Magnetic Fields • EN61000-4-8, 1 A/m, Perf Criteria A
Safety
Safety Approvals • UL60950-1, CAN/CSA C22.2 No.60950-1
* External input capacitor required, 220µF/100V
27 Nov 17
DC-DC
JTE06
Models and Ratings
Notes
Printed Face
32 11
9
2223 14
16
Bottom View
1.25
(31.75)
0.80
(20.32)
0.40
(10.40)
0.60
(15.24)
0.90
(22.86)
0.02
(0.50)
0.02
(0.50) 0.20
(5.08)
0.12
(3.05)
Pin
Single Dual
2
-Vin -Vin
3
-Vin
-Vin
9
No Pin Common
11
N.C. -Vout
14
+Vout +Vout
16
-Vout Common
22
+Vin +Vin
23
+Vin +Vin
Input Voltage Output Voltage Output Current Input Current(2) Maximum
Capacitive Load(3) Efficiency Model Number(1,6)
No Load Full Load
9-36 V
3.3 V 1400 mA 10 mA 257 mA 470 µF 76% JTE0624S3V3
5.0 V 1200 mA 10 mA 316 mA 470 µF 80% JTE0624S05
12.0 V 500 mA 10 mA 301 mA 100 µF 84% JTE0624S12
15.0 V 400 mA 10 mA 301 mA 100 µF 84% JTE0624S15
24.0 V 250 mA 10 mA 301 mA 47 µF 84% JTE0624S24
±3.3 V ±909 mA 10 mA 324 mA ±220 µF 78% JTE0624D03
±5.0 V ±600 mA 10 mA 308 mA ±220 µF 82% JTE0624D05
±12.0 V ±250 mA 10 mA 301 mA ±100 µF 84% JTE0624D12
±15.0 V ±200 mA 15 mA 301 mA ±100 µF 84% JTE0624D15
±24.0 V ±125 mA 20 mA 308 mA ±47 µF 82% JTE0624D24
18-75 V
3.3 V 1400 mA 7 mA 128 mA 470 µF 76% JTE0648S3V3
5.0 V 1200 mA 7 mA 154 mA 470 µF 82% JTE0648S05
12.0 V 500 mA 7 mA 151 mA 100 µF 84% JTE0648S12
15.0 V 400 mA 7 mA 151 mA 100 µF 84% JTE0648S15
24.0 V 250 mA 7 mA 151 mA 47 µF 84% JTE0648S24
±3.3 V ±909 mA 7 mA 162 mA ±220 µF 78% JTE0648D03
±5.0 V ±600 mA 7 mA 154 mA ±220 µF 82% JTE0648D05
±12.0 V ±250 mA 7 mA 151 mA ±100 µF 84% JTE0648D12
±15.0 V ±200 mA 7 mA 151 mA ±100 µF 84% JTE0648D15
±24.0 V ±125 mA 10 mA 158 mA ±47 µF 80% JTE0648D24
1. For optional 3000 VDC isolation add suffix ‘-H’ to model number.
2. Input current measured at nominal input voltage.
3. Maximum capacitive load is per output.
4. Cross regulation for duals is ±5% when one output is at 100% and the other is
varied between 25% and 100%.
5. Ripple & Noise measured with 1µF ceramic capacitor across output pins.
6. For optional metal case version, add suffix ‘-M’ to part number e.g.
JTE0624S12-M.
Mechanical Details
Plastic Case
Printed Face
Bottom View
1.25
(31.75) 0.90
(22.86)
0.80
(20.32) 0.60
(15.24)
DIA
0.02
(0.50)
0.10
(2.54)
0.40 (10.40)
0.12 (3.05) Min.
0.20
(5.08)
2 3
22 16 1423
911
P
1
9
2
B
Optional Metal Case
Notes
1. All dimensions are in inches (mm)
2. Weight: 0.04 lbs (17 g) approx.
3. Pin diameter: 0.02 ±0.002 (0.5 ±0.005)
4. Pin pitch tolerance: ±0.014 (0.35)
5. Case tolerance: ±0.02 (±0.5)
Application Note
Derating Curve
-40 -20 010 20 30 40 50 60 70 80 90 100
20
40
60
80
100
Ambient Temperature (ºC)
Load (%)
0
