TNPW Vishay Dale Thin Film, Rectangular, Resistor Chips FEATURES * * * * * Metal film layer on high quality ceramic Protective top coat Available with tin lead or lead (Pb)-free solder contacts Excellent stability at different environmental conditions Low temperature coefficient and tight tolerances APPLICATIONS * * * * TNPW Precision Thin Film Flat Chip Resistors are the perfect choice for most fields of modern electronics where reliability and stability is of major concern. Typical applications include telecommunication, industrial, medical equipment, high-end computer and audio/video electronics. Automotive Telecommunication Medical Equipment Industrial Equipment STANDARD ELECTRICAL SPECIFICATIONS POWER RATING P70C (W) TYPE EN 140401-801 EIA 575 0.063 0.063 TNPW0402 TNPW0603 0.100 TNPW0805 TEMPERATURE RANGE () COEFFICIENT (ppm/K) 0.063 0.125 TNPW1206 RESISTANCE 0.100 0.250 0.125 2) TNPW1210 0.33 0.250 2) TNPW2010 0.40 0.400 2) TNPW2512 0.50 0.500 TOLERANCE 10R - 100K 25, 50 0.5%, 1% 47R - 100K 10, 15, 25, 50 0.1% 10R - 332K 25, 50 0.1%, 0.5%, 1% 1) 47R - 332K 10, 15 0.1% 10R - 1M0 25, 50 0.1%, 0.5%, 1% 1) 47R - 1M0 10, 15 0.1% 10R - 2M0 25, 50 0.1%, 0.5%, 1% 1) 47R - 2M0 10, 15 0.1% 10R - 3M01 25, 50 0.5%, 1% 1) 47R - 2M13 10, 15, 25, 50 0.1% 10R - 4M99 25, 50 0.5%, 1% 47R - 1M0 25, 50 0.1% 10R - 8M87 25, 50 0.5%, 1% 47R - 1M0 25, 50 0.1% 1% resistors are only available in E24/E96 Size not specified in EN-140401-801 * Extended values available on request 1) E-SERIES 24-192 24-192 24-192 24-192 24-192 24-192 24-192 * Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material * TNPW 0402 without marking 2) TECHNICAL SPECIFICATIONS PARAMETER UNIT TNPW0402 Rated Dissipation at 70C (EN-140401-801 | EIA 575) W 0.063 0.063 Limiting Element Voltage 4) V 25 Thermal Resistance 3) K/W 870 TNPW0603 0.1 TNPW0805 0.063 0.125 75 0.1 TNPW1206 0.25 100 550 440 0.125 220 - 55 / + 125 (+ 155) Failure Rate h-1 0.3 *10-9 g 0.65 Measuring conditions in acc. with EN 140401-801 www.vishay.com 66 2 5.5 4) Rated voltage: 0.25 100 140 C > 10 TNPW2010 TNPW2512 0.4 150 90 0.5 200 70 9 Category Temperature Range Weight / 1000pcs 0.33 100 Insulation Resistance 3) TNPW1210 10 16 28 39 Px R For Technical Questions, contact: ff3aresistors@vishay.com Document Number 31006 Revision 11-Mar-05 TNPW Vishay Dale Thin Film, Rectangular, Resistor Chips DIMENSIONS SIZE INCH METRIC 0402 1005 0603 1608 0805 2012 1206 3216 1210 3225 2010 5025 2512 6332 DIMENSIONS millimeters W H 0.5 0.05 0.35 0.05 0.81 0.2 0.4 0.1 1.24 0.2 0.4 0. 1 1.6 0.15 0.61 0.15 2.49 0.15 0.61 0.15 2.5 0.15 0.61 0.15 3.1 0.15 0.61 0.15 L 1.0 0.05 1.6 0.2 2.0 0.2 3.2 0.15 3.2 0.15 5.0 0.15 6.3 0.2 T1 T2 0.2 0.1 0.3 0.2 0.4 0.25 0.5 0.25 0.46 0.2 0.6 0.25 0.6 0.25 SOLDER PAD DIMENSIONS millimeters SIZE INCH METRIC 0402 1005 0603 1608 0805 2012 1206 3216 1210 3225 2010 5025 2512 6332 REFLOW SOLDERING a b l 0.4 0.6 0.5 0.5 0.9 1.0 0.7 1.3 1.2 0.9 1.7 2.0 0.9 2.5 2.0 1.0 2.5 3.9 1.0 3.2 5.2 a 0.9 0.9 1.1 1.1 1.2 1.2 WAVE SOLDERING b l 0.9 1.0 1.3 1.3 1.7 2.3 2.5 2.3 2.5 3.9 3.2 5.2 PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: (TIN LEAD) TNPW12061K32DETA PART NUMBER: (LEAD (Pb)-FREE) TNPW12061K32DEEA Please note that products can be ordered with or without Lead (Pb)-free termination T N P W 1 2 0 6 1 K 3 MODEL VALUE TOLERANCE T.C. TNPW 0402 TNPW 0603 TNPW 0805 TNPW 1206 TNPW 1210 TNPW 2010 TNPW 2512 R = Decimal K = Thousand M = Million (4 digits) B = 0.1 % D = 0.5 % F = 1.0 % H = 50 ppm/K E = 25 ppm/K X = 15 ppm/K Y = 10 ppm/K 2 D E T A PACKAGING TIN LEAD TA = RT1 TC = RT6 TD = RT7 TF = R02 TG = R67 CN = R52 TY = R75 5000 20000 10000 4000 2000 1000 1000 SPECIAL paper tape paper tape paper tape blister tape blister tape paper tape blister tape up to 2 digits Blank = Standard PACKAGING LEAD FREE EA = ET1 EC = ET6 ED = ET7 EF = E02 EG = E67 EN = E52 EY = E75 5000 20000 10000 4000 2000 1000 1000 paper tape paper tape paper tape blister tape blister tape paper tape blister tape Historical Part Number only valid for TNPW with tin lead termination. Example: TNPW0805 1002 B T9 RT1 (will continue to be accepted) TNPW0805 1002 B T9 RT1 MODEL RESISTANCE VALUE TOLERANCE T.C. PACKAGING Ex: 1501 = 1.5k 10R0 = 10 3303 = 330k B = 0.1 % D = 0.5 % F = 1.0 % T2 = 50 ppm/K T9 = 25 ppm/K T10 = 15 ppm/K T13 = 10 ppm/K Document Number 31006 Revision 11-Mar-05 For Technical Questions, contact: ff3aresistors@vishay.com RT1 Papertape 5000 pcs www.vishay.com 67 TNPW Thin Film, Rectangular, Resistor Chips Rated Power In % Temperature Rise In C Vishay Dale 90 80 0402 0603 0805 1206 70 60 50 2010 40 30 2512 120 100 EIA 80 60 40 20 20 10 0 EN 0 0.1 0.2 0.3 0.4 0.5 Power in W Temperature Rise 0 - 55 -25 0 25 50 Derating 75 100 125 150 175 70 Ambient Temperature in C PACKAGING MODEL TAPE WIDTH [mm] PITCH [mm] REEL DIAMETER [mm/inch] PIECES PER REEL TIN LEAD PACKAGING CODE LEAD FREE (e3) PACKAGING CODE TYPE OF CARRIER TAPE TNPW 0402 8 2 180 / 7 10,000 RT7 ET7 Paper TNPW 0603 TNPW 0805 TNPW 1206 TNPW 1210 TNPW 0603 TNPW 0805 TNPW 1206 TNPW 1210 TNPW 0603 TNPW 0805 TNPW 1206 TNPW 1210 8 4 180 / 7 1,000 R521 E521 Paper 8 4 180 / 7 5,000 RT1 ET1 Paper 8 4 330 / 13 20,000 RT6 ET6 Paper TNPW 2010 12 4 180 / 7 1,000 R75 E75 Blister 4,000 R02 E02 Blister TNPW 2512 12 8 180 / 7 1,000 2,000 R75 R67 E75 E67 Blister Blister 1) R52 and E52 only for precision resistors with tolerance 0.1% and temperature coefficient 25 ppm/k DESCRIPTION ASSEMBLY Production is strictly controlled and follows an extensive set of instructions established for reproducibility. A homogeneous film of metal alloy is deposited on a super high grade ceramic substrate and conditioned to achieve the desired temperature coefficient. A special laser is used to achieve the target value by smoothly cutting a meander groove in the resistive layer without damaging the ceramics. The resistors are suitable for processing on automatic SMD assembly systems. Beside tin lead termination TNPW is also available with lead free pure tin termination. The pure tin plating of the Lead (Pb)-free resistors type, provides compatibility with Lead (Pb)-free and lead-containing soldering processes. The immunity of the plating against tin whisker growth has been proven under extensive testing. www.vishay.com 68 For Technical Questions, contact: ff3aresistors@vishay.com Document Number 31006 Revision 11-Mar-05 TNPW Vishay Dale Current Noise in V/V Non-Linearity A3 in dB Thin Film, Rectangular, Resistor Chips 120 TNPW1206 TNPW0805 TNPW0603 110 100 TNPW0402 90 80 1K 10K 100K Resistance Value in TNPW0805 TNPW1206 0.1 100 Current Noise 60 TNPW0603 20 10 100 0 [Z]-RO in % RO Phase Angle in 100 -20 1K 10K 100K 1M Resistance Value in 60 TNPW0603 40 20 10 100 1K 0 -20 1K -40 -40 -60 -80 1 HF Performance 5 10 50 100 4.75K 10K 500 1000 Frequency f in MHz 20 10 100 0 -20 1K 4.75K -80 10K 5 10 50 100 500 1000 Frequency f in MHz 60 TNPW0805 40 20 10 100 1K 0 -20 -40 -40 -60 -60 10K 1 HF Performance [Z]-RO in % RO TNPW0805 -60 1 HF Performance 60 Phase Angle in TNPW0603 0.01 10 Non-Linearity -80 TNPW0402 0.3 0.03 60 40 1 0.5 0.05 70 40 3 2 5 10 Document Number 31006 Revision 11-Mar-05 50 100 500 1000 Frequency f in MHz 10K -80 1 HF Performance 5 10 For Technical Questions, contact: ff3aresistors@vishay.com 50 100 500 1000 Frequency f in MHz www.vishay.com 69 TNPW Thin Film, Rectangular, Resistor Chips 3K TNPW0805 1K TNPW0603 Test Voltage in V Test Voltage in V Vishay Dale 10 10K 100K Resistance Value in TNPW0603 100 10 10R 100R 1K Single-Pulse High Voltage Overload Test 10 / 700s EN140000 4.27 Power Rating P in W Power Rating P in W 10R 100R 1K Single-Pulse High Voltage Overload Test 1.2 / 50s EN140000 4.27 TNPW0805 10 TNPW0603 1 10K 100K Resistance Value in 100 10 TNPW0805 TNPW0603 1 0.1 0.1 Secondary conditions: a) P > 0 (peak pulse, single pulse) b) u 70C c) Umax see diagram (Max pulse voltage) 10-5 Pulse Rating P Pulse Voltage Umax in V TNPW0805 1K 100 100 0.01 3K 10-4 >0 10-3 0.01 10-2 10-1 10-2 10-1 1 10 Square Pulse ti in s Secondary conditions: a) P P70 (permissible constant power at u = 70C) b) u 70C c) Umax see diagram (Max. pulse voltage) 10-5 10-4 Pulse Rating P P70 10-3 10-2 10-1 1 10 Square Pulse ti in s 500 TNPW0805 300 TNPW0603 400 200 100 0 Secondary conditions: a) P see diagram (Pulse Rating) b) u 70C 10-5 10-4 Maximum Pulse Voltage www.vishay.com 70 10-3 1 10 Square Pulse ti in s For Technical Questions, contact: ff3aresistors@vishay.com Document Number 31006 Revision 11-Mar-05 TNPW Vishay Dale Thin Film, Rectangular, Resistor Chips PERFORMANCE TEST CONDITIONS OF TEST TEST RESULTS TNPW0402 TO TNPW2512 TOLERANCES 0.1 % ; 0.25 % < 100R 100R 0.5 % ; 1.0% Endurance Test at 70C IEC 60115-1 4.25.1 1000 hours at 70C, 1.5 hours "ON", 0.5 hours "OFF" 0.1% 0.05% 0.25% Endurance at UCT IEC 60115-1 4.25.3 1000 hours at 125 C without load 0.1% 0.05% 0.5% Overload Test IEC 60115-1 4.13 Short time overload for 2 seconds 2.5 x rated voltage or 2 x limiting element voltage 0.05% 0.02% 0.1% Thermal Shock IEC 60115-1 4.19, IEC 60068-2-14 Rapid change between upper and lower category temperature 0.05% 0.02% 0.1% Damp Heat Steady State IEC 60115-1 4.24, IEC 60068-2-3 56 days at 40C and 93% relative humidity 0.1% 0.05% 0.5% Resistance to Soldering Heat IEC 60115-1 4.18, IEC 60068-2-20 10 seconds at 260C solder bath temperature 0.05% 0.02% 0.1% APPLICABLE SPECIFICATIONS * * * * * * CECC40000 / 40400 EN140400 EIA 575 EN 140401-801 EN 60115-1 IEC 60286-3 Document Number 31006 Revision 11-Mar-05 For Technical Questions, contact: ff3aresistors@vishay.com www.vishay.com 71