ZB4BA71217 Product data sheet Characteristics white flush/black flush double-headed pushbutton O22 with marking Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 43.40 USD Commercial status Discontinued on: 02 December 2020 End-of-service on: 31 December 2020 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications ZB4BA71217 has not been replaced. Please contact your customer care center for more information. Discontinued Main Range of product Harmony XB4 Product or component type Head for double-headed push-button Device short name ZB4 Bezel material Black metal Mounting diameter 0.87in (22mm) Head type Standard Sale per indivisible quantity 1 Shape of signaling unit head Rectangular Type of operator spring return Operator profile 2 flush push-buttons Operators description White ''I'' - black ''O'' Complementary Net Weight 0.12lb(US) (0.056kg) Resistance to high pressure washer 7000000Pa at 55C, distance : 0.1 m Colour of marking Black marking when white caps White marking when green, red or black caps Operator profile Black flush, O white) White flush, I black) Mechanical durability 1000000cycles Electrical composition code C3 for <6 contacts using single blocks in front mounting C4 for <6 contacts using single and double blocks in front mounting C14 for <2 contacts using single blocks in front mounting Device presentation Basic element *Price is "List Price" and may be subject to a trade discount - check with your local distributor or retailer for actual price. Feb 8, 2021 1 Environment Ambient air temperature for storage -40...158F (-40...70C) Ambient air temperature for operation -40...158F (-40...70C) Electrical shock protection class Class I IEC 60536 IP degree of protection IP69 conforming to IEC 60529 IP69K conforming to IEC 60529 NEMA degree of protection NEMA 13 NEMA 4X IK degree of protection IK06 conforming to IEC 50102 Standards EN/IEC 60947-5-1 UL 508 EN/IEC 60947-5-4 JIS C8201-5-1 EN/IEC 60947-1 CSA C22.2 No 14 EN/IEC 60947-5-5 JIS C8201-1 Product certifications RINA UL Listed CSA BV GL LROS (Lloyds register of shipping) DNV Vibration resistance 5 gn (f= 2...500Hz) conforming to IEC 60068-2-6 Shock resistance 30 gn (duration = 18ms) for half sine wave acceleration conforming to IEC 60068-2-27 50 gn (duration = 11ms) for half sine wave acceleration conforming to IEC 60068-2-27 Ordering and shipping details Category 22468 - PUSHBUTTONS,22MM(METAL) NEW Discount Schedule CS2 GTIN 03389119043892 Nbr. of units in pkg. 1 Package weight(Lbs) 0.12lb(US) (0.05kg) Returnability No Country of origin FR Packing Units Unit Type of Package 1 PCE Package 1 Height 1.30in (3.3cm) Package 1 width 1.77in (4.5cm) Package 1 Length 2.09in (5.3cm) Offer Sustainability Sustainable offer status Green Premium product California proposition 65 WARNING: This product can expose you to chemicals including: Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov REACh Regulation REACh Declaration REACh free of SVHC Yes EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration Toxic heavy metal free Yes Mercury free Yes RoHS exemption information Yes China RoHS Regulation China RoHS declaration 2 Environmental Disclosure Product Environmental Profile Circularity Profile End of Life Information Contractual warranty Warranty 18 months 3 Product data sheet Dimensions Drawings Dimensions Without Boot Without Boot ZBA708 4 ZB4BA71217 Product data sheet Mounting and Clearance ZB4BA71217 Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation) Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board (1) (2) (3) (4) (5) (6) Connection by Faston Connectors Diameter on finished panel or support 40mm min. / 1.57in. min. 30mm min. / 1.18in. min. +0.4 +0.016 O 22.5mm / 0.89in. recommended (O 22.3mm 0 / 0.88in. 0 ) 45mm min. / 1.78in. min. 32mm min. / 1.26in. min. 5 Product data sheet Mounting and Clearance ZB4BA71217 Pushbuttons, Switches and Pilot Lights for Printed Circuit Board Connection Panel Cut-outs (Viewed from Installer's Side) A: B: 30mm min. / 1.18in. min. 40mm min. / 1.57in. min. Printed Circuit Board Cut-outs (Viewed from Electrical Block Side) Dimensions in mm A: B: 30mm min. 40mm min. 6 Dimensions in in. A: B: 1.18in. min. 1.57in. min. General Tolerances of the Panel and Printed Circuit Board The cumulative tolerance must not exceed 0.3mm / 0.012in: T1 + T2 = 0.3mm max. Installation Precautions Minimum thickness of circuit board: 1.6mm / 0.06in. Cut-out diameter: 22.4mm 0.1 / 0.88in. 0.004 Orientation of body/fixing collar ZB4BZ009: 230' (excluding cut-outs marked a and b). Tightening torque of screws ZBZ006: 0.6N.m (5.3lbf.in) max. Allow for one ZB4BZ079 fixing collar/pillar and its fixing screws: every 90mm / 3.54in. horizontally (X), and 120mm / 4.72in. vertically (Y). with each selector switch head (ZB4BD*, ZB4BJ*, ZB4BG*). The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5. (1) (2) Panel Printed circuit board 7 Mounting of Adapter (Socket) ZBZ01* 1 2 elongated holes for ZBZ006 screw access 2 1 hole O 2.4mm 0.05 / 0.09in. 0.002 for centring adapter ZBZ01* 3 8 x O 1.2mm / 0.05in. holes 4 1 hole O 2.9mm 0.05 / 0.11in. 0.002, for aligning the printed circuit board (with cut-out marked a) 5 1 elongated hole for aligning the printed circuit board (with cut-out marked b) 6 4 holes O 2.4mm / 0.09in. for clipping in adapter ZBZ01* Dimensions An + 18.1 relate to the O 2.4mm 0.05 / 0.09in. 0.002 holes for centring adapter ZBZ01*. 8 Product data sheet Technical Description ZB4BA71217 Electrical Composition Corresponding to Code C3 9 Product data sheet Technical Description ZB4BA71217 Electrical Composition Corresponding to Code C4 10 Product data sheet Technical Description ZB4BA71217 Electrical Composition Corresponding to Codes C14, SF2 and SR2 11 Product data sheet Technical Description Legend Single contact Double contact Light block Possible location 12 ZB4BA71217