Product data sheet
Characteristics
ZB4BA71217
white flush/black flush double-headed pushbutton
Ø22 with marking
Product availability : Non-Stock - Not normally stocked in distribution facility
Price* : 43.40 USD
Discontinued
Commercial status
Discontinued on: 02 December 2020
End-of-service on: 31 December 2020
ZB4BA71217 has not been replaced. Please contact your
customer care center for more information.
Main
Range of product Harmony XB4
Product or component type Head for double-headed push-button
Device short name ZB4
Bezel material Black metal
Mounting diameter 0.87in (22mm)
Head type Standard
Sale per indivisible quantity 1
Shape of signaling unit head Rectangular
Type of operator spring return
Operator profile 2 flush push-buttons
Operators description White ''I'' - black ''O''
Complementary
Net Weight 0.12lb(US) (0.056kg)
Resistance to high pressure washer 7000000Pa at 55°C, distance : 0.1 m
Colour of marking Black marking when white caps
White marking when green, red or black caps
Operator profile Black flush, O white)
White flush, I black)
Mechanical durability 1000000cycles
Electrical composition code C3 for <6 contacts using single blocks in front mounting
C4 for <6 contacts using single and double blocks in front mounting
C14 for <2 contacts using single blocks in front mounting
Device presentation Basic element
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
*Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price.
Feb 8, 2021
1
Environment
Ambient air temperature for storage -40…158°F (-40…70°C)
Ambient air temperature for operation -40…158°F (-40…70°C)
Electrical shock protection class Class I IEC 60536
IP degree of protection IP69 conforming to IEC 60529
IP69K conforming to IEC 60529
NEMA degree of protection NEMA 13
NEMA 4X
IK degree of protection IK06 conforming to IEC 50102
Standards EN/IEC 60947-5-1
UL 508
EN/IEC 60947-5-4
JIS C8201-5-1
EN/IEC 60947-1
CSA C22.2 No 14
EN/IEC 60947-5-5
JIS C8201-1
Product certifications RINA
UL Listed
CSA
BV
GL
LROS (Lloyds register of shipping)
DNV
Vibration resistance 5 gn (f= 2…500Hz) conforming to IEC 60068-2-6
Shock resistance 30 gn (duration = 18ms) for half sine wave acceleration conforming to IEC 60068-2-27
50 gn (duration = 11ms) for half sine wave acceleration conforming to IEC 60068-2-27
Ordering and shipping details
Category 22468 - PUSHBUTTONS,22MM(METAL) NEW
Discount Schedule CS2
GTIN 03389119043892
Nbr. of units in pkg. 1
Package weight(Lbs) 0.12lb(US) (0.05kg)
Returnability No
Country of origin FR
Packing Units
Unit Type of Package 1 PCE
Package 1 Height 1.30in (3.3cm)
Package 1 width 1.77in (4.5cm)
Package 1 Length 2.09in (5.3cm)
Offer Sustainability
Sustainable offer status Green Premium product
California proposition 65 WARNING: This product can expose you to chemicals including: Di-isodecyl phthalate (DIDP),
which is known to the State of California to cause birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov
REACh Regulation REACh Declaration
REACh free of SVHC Yes
EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal free Yes
Mercury free Yes
RoHS exemption information Yes
China RoHS Regulation China RoHS declaration
2
Environmental Disclosure Product Environmental Profile
Circularity Profile End of Life Information
Contractual warranty
Warranty 18 months
3
Product data sheet
Dimensions Drawings
ZB4BA71217
Dimensions
Without Boot
Without Boot ZBA708
4
Product data sheet
Mounting and Clearance
ZB4BA71217
Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)
Connection by Screw Clamp Terminals or Plug-in Connectors or on
Printed Circuit Board
Connection by Faston Connectors
(1) Diameter on finished panel or support
(2) 40mm min. / 1.57in. min.
(3) 30mm min. / 1.18in. min.
(4) Ø 22.5mm / 0.89in. recommended (Ø 22.3mm 0 +0.4 / 0.88in. 0 +0.016)
(5) 45mm min. / 1.78in. min.
(6) 32mm min. / 1.26in. min.
5
Product data sheet
Mounting and Clearance
ZB4BA71217
Pushbuttons, Switches and Pilot Lights for Printed Circuit Board Connection
Panel Cut-outs (Viewed from Installer’s Side)
A: 30mm min. / 1.18in. min.
B: 40mm min. / 1.57in. min.
Printed Circuit Board Cut-outs (Viewed from Electrical Block Side)
Dimensions in mm
A: 30mm min.
B: 40mm min.
6
Dimensions in in.
A: 1.18in. min.
B: 1.57in. min.
General Tolerances of the Panel and Printed Circuit Board
The cumulative tolerance must not exceed 0.3mm / 0.012in: T1 + T2 = 0.3mm max.
Installation Precautions
● Minimum thickness of circuit board: 1.6mm / 0.06in.
● Cut-out diameter: 22.4mm ± 0.1 / 0.88in. ± 0.004
●Orientation of body/fixing collar ZB4BZ009: ± 2°30’ (excluding cut-outs marked a and b).
● Tightening torque of screws ZBZ006: 0.6N.m (5.3lbf.in) max.
● Allow for one ZB4BZ079 fixing collar/pillar and its fixing screws:
○ every 90mm / 3.54in. horizontally (X), and 120mm / 4.72in. vertically (Y).
○ with each selector switch head (ZB4BD•, ZB4BJ•, ZB4BG•).
The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5.
(1) Panel
(2) Printed circuit board
7
Mounting of Adapter (Socket) ZBZ01•
● 1 2 elongated holes for ZBZ006 screw access
● 2 1 hole Ø 2.4mm ± 0.05 / 0.09in. ± 0.002 for centring adapter ZBZ01•
● 3 8 × Ø 1.2mm / 0.05in. holes
● 4 1 hole Ø 2.9mm ± 0.05 / 0.11in. ± 0.002, for aligning the printed circuit board (with cut-out marked a)
● 5 1 elongated hole for aligning the printed circuit board (with cut-out marked b)
● 6 4 holes Ø 2.4mm / 0.09in. for clipping in adapter ZBZ01•
Dimensions An + 18.1 relate to the Ø 2.4mm ± 0.05 / 0.09in. ± 0.002 holes for centring adapter ZBZ01•.
8
Product data sheet
Technical Description
ZB4BA71217
Electrical Composition Corresponding to Code C3
9
Product data sheet
Technical Description
ZB4BA71217
Electrical Composition Corresponding to Code C4
10
Product data sheet
Technical Description
ZB4BA71217
Electrical Composition Corresponding to Codes C14, SF2 and SR2
11
Product data sheet
Technical Description
ZB4BA71217
Legend
Single contact
Double contact
Light block
Possible location
12