Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ EB
– EEE-87 –
0D±0.5
05 to08010
0d±0.05
F±0.5
Sleeve
14 min.
3 min.
L=
(08L15 only L±1.5)=L16 : L±1.0
L20 : L±2.0
Pressure relief
06.3+
–
0D±0.5
■ Features
● Endurance : +105 °C 5000 h to 10000 h
● Hight ripple hight frequency (Hight Voltage)
● RoHS directive compliant
Radial Lead Type
Series: EB Type: A
■ Speci cations
Category Temp. Range –40 °C to +105 °C –25 °C to +105 °C
Rated W.V. Range 10 V.DC to 63 V.DC 160 V.DC to 450 V.DC
Nominal Cap. Range 2.2 μF to 3300 μF 10 μF to 330 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (μA)
After 2 minutes ap pli ca tion of rated working voltage at +20 °C (Whichever is greater)
tan dPlease see the attached standard products list
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied
(The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when
the capacitors are restord to 20 °C, the capacitors shall meet the limits specified below.
(10 to 63 V.DC)
Duration : 05×11 to 08×11.5 : 5000 hours 05×15 to 06.3×15 : 7000 hours
08×15 to 012.5×25 : 10000 hours
Capacitance change ±30 % of initial measured value
tan d< 300 % of initial specifi ed value
DC leakage current < initial specifi ed value
(160 to 450 V.DC)
Duration : 5000 hours
Capacitance change ±20 % of initial measured value
tan d< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Body Dia. 0D 5 6.3 8 10 12.5 16 18
Lead Dia. 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
■ Frequency correction factor for ripple current
(10 ~ 63 V.DC)
Capacitance
(μF)
Frequency (Hz)
60 120 1 k 10 k 100 k
0.47 to 10 0.75 1.00 1.40 1.55 1.65
22 to 470 0.85 1.00 1.20 1.25 1.30
1000 to 3300 0.95 1.00 1.05 1.10 1.15
W. V.
(V. DC)
Frequency (Hz)
120 1 k
10 k to 30k 30 k to 100k
160 to 250 0.55 0.85 0.90 1.00
350 to 450 0.50 0.80 0.90 1.00
■ Di men sions in mm (not to scale) (Unit : mm)
01 Oct. 2013
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ EB
– EEE-88 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+105 °C)
tan d
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
10
100 5 15 105 0.30 7000 0.5 2.0 5.0 2.5
EEUEB1A101( )
200 2000
5 11 66 0.30 5000 0.5 2.0 5.0 2.5
EEUEB1A101S( )
200 2000
220 6.3 15 152 0.30 7000 0.5 2.5 5.0 2.5
EEUEB1A221( )
200 2000
6.3 11.2 100 0.30 5000 0.5 2.5 5.0 2.5
EEUEB1A221S( )
200 2000
470 8 15 278 0.30 10000 0.6 3.5 5.0
EEUEB1A471( )
200 1000
8 11.5 180 0.30 5000 0.6 3.5 5.0
EEUEB1A471S( )
200 1000
2200 12.5 20 540 0.32 10000 0.6 5.0 5.0
EEUEB1A222( )
200 500
3300 12.5 25 802 0.34 10000 0.6 5.0 5.0
EEUEB1A332( )
200 500
16 1000 10 20 430 0.25 10000 0.6 5.0 5.0
EEUEB1C102( )
200 500
2200 12.5 25 706 0.27 10000 0.6 5.0 5.0
EEUEB1C222( )
200 500
25
47 5 15 78 0.22 7000 0.5 2.0 5.0 2.5
EEUEB1E470( )
200 2000
5 11 55 0.22 5000 0.5 2.0 5.0 2.5
EEUEB1E470S( )
200 2000
100 6.3 15 135 0.22 7000 0.5 2.5 5.0 2.5
EEUEB1E101( )
200 2000
6.3 11.2 95 0.22 5000 0.5 2.5 5.0 2.5
EEUEB1E101S( )
200 2000
220 8 11.5 125 0.22 5000 0.6 3.5 5.0
EEUEB1E221S( )
200 1000
330 8 15 255 0.22 10000 0.6 3.5 5.0
EEUEB1E331( )
200 1000
470 10 16 321 0.22 10000 0.6 5.0 5.0
EEUEB1E471( )
200 500
1000 12.5 20 498 0.22 10000 0.6 5.0 5.0
EEUEB1E102( )
200 500
35
33 5 15 66 0.18 7000 0.5 2.0 5.0 2.5
EEUEB1V330( )
200 2000
5 11 46 0.18 5000 0.5 2.0 5.0 2.5
EEUEB1V330S( )
200 2000
220 8 15 197 0.18 10000 0.6 3.5 5.0
EEUEB1V221( )
200 1000
330 10 16 278 0.18 10000 0.6 5.0 5.0
EEUEB1V331( )
200 500
470 10 20 349 0.18 10000 0.6 5.0 5.0
EEUEB1V471( )
200 500
1000 12.5 25 586 0.18 10000 0.6 5.0 5.0
EEUEB1V102( )
200 500
50
0.47 5 11 4 0.15 5000 0.5 2.0 5.0 2.5
EEUEB1HR47S( )✽✽✽
200 2000
1 5 11 8 0.15 5000 0.5 2.0 5.0 2.5
EEUEB1H1R0S( )✽✽✽
200 2000
2.2 5 11 15 0.15 5000 0.5 2.0 5.0 2.5
EEUEB1H2R2S( )
200 2000
3.3 5 11 18 0.15 5000 0.5 2.0 5.0 2.5
EEUEB1H3R3S( )
200 2000
4.7 5 11 18 0.15 5000 0.5 2.0 5.0 2.5
EEUEB1H4R7S( )
200 2000
10 5 11 27 0.15 5000 0.5 2.0 5.0 2.5
EEUEB1H100S( )
200 2000
22 5 15 55 0.15 7000 0.5 2.0 5.0 2.5
EEUEB1H220( )
200 2000
5 11 39 0.15 5000 0.5 2.0 5.0 2.5
EEUEB1H220S( )
200 2000
47 6.3 15 87 0.15 7000 0.5 2.5 5.0 2.5
EEUEB1H470( )
200 2000
6.3 11.2 61 0.15 5000 0.5 2.5 5.0 2.5
EEUEB1H470S( )
200 2000
100 8 11.5 99 0.15 5000 0.6 3.5 5.0
EEUEB1H101S( )
200 1000
220 10 16 234 0.15 10000 0.6 5.0 5.0
EEUEB1H221( )
200 500
330 10 20 293 0.15 10000 0.6 5.0 5.0
EEUEB1H331( )
200 500
470 12.5 20 370 0.15 10000 0.6 5.0 5.0
EEUEB1H471( )
200 500
63
0.47 5 15 6 0.12 7000 0.5 2.0 5.0 2.5
EEUEB1JR47( )✽✽✽
200 2000
5 11 4.5 0.12 5000 0.5 2.0 5.0 2.5
EEUEB1JR47S( )✽✽✽
200 2000
1 5 15 12 0.12 7000 0.5 2.0 5.0 2.5
EEUEB1J1R0( )✽✽✽
200 2000
5 11 9 0.12 5000 0.5 2.0 5.0 2.5
EEUEB1J1R0S( )✽✽✽
200 2000
2.2 5 11 16.5 0.12 5000 0.5 2.0 5.0 2.5
EEUEB1J2R2S( )
200 2000
3.3 5 15 30 0.12 7000 0.5 2.0 5.0 2.5
EEUEB1J3R3( )
200 2000
5 11 20 0.12 5000 0.5 2.0 5.0 2.5
EEUEB1J3R3S( )
200 2000
4.7 5 15 30 0.12 7000 0.5 2.0 5.0 2.5
EEUEB1J4R7( )
200 2000
5 11 23 0.12 5000 0.5 2.0 5.0 2.5
EEUEB1J4R7S( )
200 2000
10 5 15 46 0.12 7000 0.5 2.0 5.0 2.5
EEUEB1J100( )
200 2000
5 11 30 0.12 5000 0.5 2.0 5.0 2.5
EEUEB1J100S( )
200 2000
22 6.3 15 55 0.12 7000 0.5 2.5 5.0 2.5
EEUEB1J220( )
200 2000
6.3 11.2 40 0.12 5000 0.5 2.5 5.0 2.5
EEUEB1J220S( )
200 2000
33 6.3 15 71 0.12 7000 0.5 2.5 5.0 2.5
EEUEB1J330( )
200 2000
6.3 11.2 50 0.12 5000 0.5 2.5 5.0 2.5
EEUEB1J330S( )
200 2000
47 8 15 94 0.12 10000 0.6 3.5 5.0
EEUEB1J470( )
200 1000
8 11.5 80 0.12 5000 0.6 3.5 5.0
EEUEB1J470S( )
200 1000
100 8 15 180 0.12 10000 0.6 3.5 5.0
EEUEB1J101( )
200 1000
220 10 20 292 0.12 10000 0.6 5.0 5.0
EEUEB1J221( )
200 500
330 12.5 20 381 0.12 10000 0.6 5.0 5.0
EEUEB1J331( )
200 500
470 12.5 25 454 0.12 10000 0.6 5.0 5.0
EEUEB1J471( )
200 500
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽✽ Please kindly accept last shipment : 31/Mar/2015
Endurance : 105 °C 05×11 to 08×11.5=5000 h, 05×15 to 06.3×15=7000 h, 08×15 to 012.5×25=10000 h
01 Oct. 2013
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ EB
– EEE-89 –
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+105 °C)
tan d
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
(V) (μF) (mm) (mm)
(mA r.m.s.)
(hours) (mm) (mm) (mm) (pcs) (pcs)
160
22 10 20 470 0.15 5000 0.6 5.0 5.0 EEUEB2C220( ) 200 500
33 10 20 470 0.15 5000 0.6 5.0 5.0 EEUEB2C330( ) 200 500
47 12.5 20 600 0.15 5000 0.6 5.0 5.0 EEUEB2C470( ) 200 500
68 12.5 25 750 0.15 5000 0.6 5.0 5.0 EEUEB2C680( ) 200 500
16 20 750 0.15 5000 0.8 7.5 7.5 EEUEB2C680S( ) 100 250
100 16 25 1060 0.15 5000 0.8 7.5 7.5 EEUEB2C101( ) 100 250
18 20 1060 0.15 5000 0.8 7.5 7.5 EEUEB2C101S( ) 100 250
150 16 31.5 1280 0.15 5000 0.8 7.5 – EEUEB2C151 100 –
18 25 1280 0.15 5000 0.8 7.5 7.5 EEUEB2C151S( ) 100 250
220 16 31.5 1280 0.15 5000 0.8 7.5 – EEUEB2C221 100 –
18 25 1280 0.15 5000 0.8 7.5 7.5 EEUEB2C221S( ) 100 250
330 18 31.5 1690 0.15 5000 0.8 7.5 – EEUEB2C331 50 –
200
22 10 20 470 0.15 5000 0.6 5.0 5.0 EEUEB2D220( ) 200 500
33 12.5 20 600 0.15 5000 0.6 5.0 5.0 EEUEB2D330( ) 200 500
47 12.5 20 600 0.15 5000 0.6 5.0 5.0 EEUEB2D470( ) 200 500
68 12.5 25 750 0.15 5000 0.6 5.0 5.0 EEUEB2D680( ) 200 500
16 20 750 0.15 5000 0.8 7.5 7.5 EEUEB2D680S( ) 100 250
100 16 25 1060 0.15 5000 0.8 7.5 7.5 EEUEB2D101( ) 100 250
18 20 1060 0.15 5000 0.8 7.5 7.5 EEUEB2D101S( ) 100 250
150 16 31.5 1280 0.15 5000 0.8 7.5 – EEUEB2D151 100 –
18 25 1280 0.15 5000 0.8 7.5 7.5 EEUEB2D151S( ) 100 250
220 18 31.5 1690 0.15 5000 0.8 7.5 – EEUEB2D221 50 –
250
22 12.5 20 560 0.15 5000 0.6 5.0 5.0 EEUEB2E220( ) 200 500
33 12.5 20 560 0.15 5000 0.6 5.0 5.0 EEUEB2E330( ) 200 500
47 12.5 25 710 0.15 5000 0.6 5.0 5.0 EEUEB2E470( ) 200 500
16 20 710 0.15 5000 0.8 7.5 7.5 EEUEB2E470S( ) 100 250
68 16 25 990 0.15 5000 0.8 7.5 7.5 EEUEB2E680( ) 100 250
18 20 990 0.15 5000 0.8 7.5 7.5 EEUEB2E680S( ) 100 250
100 16 31.5 1200 0.15 5000 0.8 7.5 – EEUEB2E101 100 –
18 25 1200 0.15 5000 0.8 7.5 7.5 EEUEB2E101S( ) 100 250
150 18 31.5 1470 0.15 5000 0.8 7.5 – EEUEB2E151 50 –
350
10 10 20 270 0.20 5000 0.6 5.0 5.0 EEUEB2V100( ) 200 500
22 12.5 20 350 0.20 5000 0.6 5.0 5.0 EEUEB2V220( ) 200 500
33 16 20 480 0.20 5000 0.8 7.5 7.5 EEUEB2V330S( ) 100 250
47 16 25 640 0.20 5000 0.8 7.5 7.5 EEUEB2V470( ) 100 250
18 20 640 0.20 5000 0.8 7.5 7.5 EEUEB2V470S( ) 100 250
68 16 31.5 780 0.20 5000 0.8 7.5 – EEUEB2V680 100 –
18 25 780 0.20 5000 0.8 7.5 7.5 EEUEB2V680S( ) 100 250
100 18 31.5 970 0.20 5000 0.8 7.5 – EEUEB2V101 50 –
400
10 10 20 250 0.24 5000 0.6 5.0 5.0 EEUEB2G100( ) 200 500
22 12.5 25 410 0.24 5000 0.6 5.0 5.0 EEUEB2G220( ) 200 500
16 20 410 0.24 5000 0.8 7.5 7.5 EEUEB2G220S( ) 100 250
33 16 25 600 0.24 5000 0.8 7.5 7.5 EEUEB2G330( ) 100 250
18 20 600 0.24 5000 0.8 7.5 7.5 EEUEB2G330S( ) 100 250
47 16 31.5 730 0.24 5000 0.8 7.5 – EEUEB2G470 100 –
18 25 730 0.24 5000 0.8 7.5 7.5 EEUEB2G470S( ) 100 250
450
10 12.5 20 310 0.24 5000 0.6 5.0 5.0 EEUEB2W100( ) 200 500
22 16 25 560 0.24 5000 0.8 7.5 7.5 EEUEB2W220( ) 100 250
18 20 560 0.24 5000 0.8 7.5 7.5 EEUEB2W220S( ) 100 250
33 16 31.5 680 0.24 5000 0.8 7.5 – EEUEB2W330( ) 100 –
18 25 680 0.24 5000 0.8 7.5 7.5 EEUEB2W330S( ) 100 250
47 18 31.5 850 0.24 5000 0.8 7.5 – EEUEB2W470 50 –
■ Standard Prod ucts
· When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 105 °C 5000 h
01 Oct. 2013
