www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.025/02/13
Low-Leakage Double Diode
Features:
• Plastic SMD Package
• Low Leakage Current : typ. 3pA
• Switching Time : Typ. 0.8 ms
• Continuous Reverse Voltage : 75V Max.
• Repetitive Peak Reverse Voltage : 85V Max.
• Repetitive Peak Forward Current : 500mA Max.
Applications:
Low-leakage current applications in surface mounted circuits
Max. Rating @ Ta = 25°C unless otherwise specied
Parameter Symbol Limits Unit
Repetitive peak reverse voltage Vrrm 85 V
DC Reverse Voltage Vr75 V
Forward continuous current Single diode loaded
Double diode loaded If215
125 mA
Repetitive peak forward current Ifrm 500 mA
Non-Repetitive peak forward current square wave;
Tj = 25C prior to surge; tp=1μs
tp=1ms
tp=1s
Ifsm 4
1
0.5
A
Total power dissipation Ptot 250 mW
Operating junction temperature range Tj150 °C
Storage temperature range Tstg -65 to +125 °C
Electrical Characteristics @ Ta = 25°C unless otherwise specied
Parameter Symbol Conditions Min. Max. Unit
Forward voltage Vf
If = 1mA
If = 10mA
If = 50mA
If = 100mA
-
900
1,000
1,100
1,250
mV
Reverse leakage current IrVr = 75V
Vr = 75V, Tj=150°C -5
80 nA
Junction capacitance CjVr = 0V, f = 1MHz - 2 pF
Reverse recovery time trr If = Ir = 10mA,
Irr = 0.1 × Ir- 3 μs
www.element14.com
www.farnell.com
www.newark.com
Page <2> V1.025/02/13
Low-Leakage Double Diode
Typical Characteristics @ Ta = 25°C unless otherwise specied
www.element14.com
www.farnell.com
www.newark.com
Page <3> V1.025/02/13
Low-Leakage Double Diode
Plastic surface mounted package
www.element14.com
www.farnell.com
www.newark.com
Page <4> V1.025/02/13
Low-Leakage Double Diode
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
Part Number Table
Description Part Number
Low-leakage double diode BAV170-7-F
Package Information
Device Package Shipping
BAV170-7-F SOT-23 3,000 / Tape & Reel
Soldering Footprint
