26 HEATING TECHNICAL DATASHEET COMPACT HIGH-PERFORMANCE FAN HEATER CR 030 | 950W >>Compact design >>Double insulated >> Integrated thermostat or hygrostat www.stego.de | www.stego.co.uk | www.stegonorden.se PRODUCT CATALOGUE - STEGO TECHNICAL DATA Heating element high performance cartridge Temperature safety cut-out to protect against overheating in case of fan failure, automatic reset Heater body extruded aluminium profile Axial fan, ball bearing airflow 160m/h, free flow service life 50,000h at +25C (+77F) Connection 2-pole max. 2.5mm, clamping screw with strain relief, torque 0.8Nm max. Casing plastic according to UL94 V-0, black Mounting screw fixing (M5) Fitting position vertical airflow (air outlet up) - other fitting positions possible Dimensions 168 x 145 x 100mm Weight approx. 1.4kg Operating/Storage temperature -45 to +70C (-49 to +158F) Operating/Storage humidity max. 90% RH (non-condensing) Protection type/Protection class IP20 / II (double insulated) Note other heating capacities from 200W up available on request Operating temperature of heater with integrated hygrostat: 0 to +60C (+32 to +140F). Connection diagram Art. No. Model Operating voltage Heating capacity Pre-fuse T (time-delay) Setting range Approvals 03051.0-00 Fan Heater with thermostat 230VAC, 50/60Hz 950W 5A 0 to +60C VDE + UL File No. E234324 03051.0-02 Fan Heater with hygrostat 230VAC, 50/60Hz 950W 5A 65% RH, factory-set VDE + UL File No. E234324 03059.9-00 Fan Heater with thermostat 120VAC, 50/60Hz 950W 10A +32 to +140F UL File No. E234324 Switch temperature difference 7K (4K tolerance) 20.03.2013 | Specifications are subject to change without notice. Errors and omissions excepted. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application. The compact high performance fan heater prevents formation of condensation and frost and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The plastic housing provides double insulation and acts as protection against contact. The fan heater is available with integrated thermostat or pre-set hygrostat for temperature or humidity control. The CR 030 was designed as a stationary unit for the bottom of the enclosure. For wall fixing the fan heater CR 130 is recommended.