26 PRODUCT CATALOGUE - STEGOHEATING
COMPACT HIGH-PERFORMANCE FAN HEATER
CR 030 | 950W
² Switch temperature difference 7K (±4K tolerance)
The compact high performance fan heater prevents formation of condensation and frost and provides an evenly
distributed interior air temperature in enclosures with electric/electronic components. The plastic housing provi
des
double insulation and acts as protection against contact. The fan heater is available with integrated thermostat
or pre-set hygrostat for temperature or humidity control. The CR 030 was designed as a stationary unit for the
bottom of the enclosure. For wall fixing the fan heater CR 130 is recommended.
> Compact design
> Double insulated
> Integrated thermostat or hygrostat
Connection diagram
TECHNICAL DATA
Heating element high performance cartridge
Temperature safety cut-out
to protect against overheating in case of fan failure, automatic reset
Heater body extruded aluminium profile
Axial fan, ball bearing airflow 160m³/h, free flow
service life 50,000h at +25°C (+77°F)
Connection 2-pole max. 2.5mm², clamping screw with strain relief,
torque 0.8Nm max.
Casing plastic according to UL94 V-0, black
Mounting screw fixing (M5)
Fitting position vertical airflow (air outlet up) – other fitting positions possible
Dimensions 168 x 145 x 100mm
Weight approx. 1.4kg
Operating¹/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)
Note other heating capacities from 200W up available on request
¹ Operating temperature of heater with integrated hygrostat: 0 to +60°C (+32 to +140°F).
Art. No. Model Operating voltage Heating capacity Pre-fuse T (time-delay) Setting range² Approvals
03051.0-00 Fan Heater with thermostat 230VAC, 50/60Hz 950W 5A 0 to +60°C VDE + UL File No. E234324
03051.0-02 Fan Heater with hygrostat 230VAC, 50/60Hz 950W 5A 65% RH, factory-set VDE + UL File No. E234324
03059.9-00 Fan Heater with thermostat 120VAC, 50/60Hz 950W 10A +32 to +140°F UL File No. E234324
TECHNICAL DATASHEET
20.03.2013 | Specifications are subject to change without notice. Errors and omissions excepted. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application. www.stego.de | www.stego.co.uk | www.stegonorden.se
