854565 350 MHz SAW Filter Applications General Purpose For IF applications Product Features Functional Block Diagram Top view Typical 1 dB Bandwidth of 1.2 MHz Low loss High attenuation Single-ended operation Ceramic Surface Mount Package (SMP) Small Size Dimensions: 13.30 x 6.50 x 1.75mm Hermetically Sealed RoHS compliant, Pb-free Pb Gnd Gnd Gnd Gnd 10 9 8 7 Input 11 Gnd General Description 12 1 2 3 4 Gnd Gnd Gnd Gnd 6 Gnd 5 Output Pin Configuration Single-ended The 854565 is a high-performance IF SAW filter with a center frequency of 350 MHz and an 1 dB bandwidth of 1.2 MHz. It features low loss with excellent attenuation, and is designed to be used with a single ended input and output. Pin # Description 11 5 6,12 1,2,3,4,7,8,9,10 Input Output Ground Case ground The device is RoHS compliant and Pb-free. Ordering Information Part No. Description 854565 854565-EVB packaged part evaluation board Standard T/R size = 2000 units/reel. Preliminary Data Sheet: Rev - 6/14/11 (c) 2011 TriQuint Semiconductor, Inc. - 1 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 854565 350 MHz SAW Filter Specifications Electrical Specifications (1) Specified Temperature Range: +25 C Parameter Center Frequency Insertion Loss 1 dB Bandwidth (3) 40 dB Bandwidth (3) Group Delay Variation Phase Ripple Triple Transit suppression Source Impedance (single-ended) (4) Load Impedance (single-ended) (4) Conditions At 350 MHz 349.5 - 350.5 MHz 349.5 - 350.5 MHz Min Typical (2) Max Units 349.85 1.0 40 - 350 10.2 1.2 3.3 80 2.6 43 50 50 350.15 12 4.5 270 6.0 - MHz dB MHz MHz ns p-p deg p-p dB Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3 2. Typical values are based on average measurements at room temperature 3. Relative to minimum insertion loss 4. This is the optimum impedance in order to achieve the performance shown Absolute Maximum Ratings Parameter Rating Operating Temperature (5) Storage Temperature -40 to +85 oC -40 to +85 oC 5. Device may operate over this range with degraded Electrical Specifications Operation of this device outside the parameter ranges given above may cause permanent damage. Preliminary Data Sheet: Rev - 6/14/11 (c) 2011 TriQuint Semiconductor, Inc. - 2 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 854565 350 MHz SAW Filter Reference Design - 50 SE Input, 50 SE Output Schematic 27nH 12nH 11 50 Single-ended Input 50 5 18pF 8.2nH 1,2,3,4,6 7,8,9,10,12 50 Single-ended Output 50 Notes: 1. Actual matching values may vary due to PCB layout and parasitics PC Board Mounting Configuration 13.51 1.70 3.53 960590 L1 C1 SAWTEK 854565 JJJYHH 6.70 L2 L3 .99 .99 1.55 1.70 8.61 Notes: Top, middle & bottom layers: 1 oz copper Substrates: FR4 dielectric, .031" thick Finish plating: Nickel: 3-8m thick, Gold: .03-.2m thick Hole plating: Copper min .0008m thick Notes: 1. All dimensions are in millimeters. 2. This footprint represents a recommendation only. Bill of Material Reference Desg. Value Description Manufacturer L1 L2 L3 C1 SMA PCB 27 nH 12 nH 8.2 nH 18.0 pF N/A N/A Coil Wire-wound,0805, 5% Coil Wire-wound, 0805, 5% Coil Wire-wound, 0805, 5% Chip Capacitor,0805, 5% SMA connector 3-layer Coillcraft Coilcraft Coilcraft MuRata Radiall USA Inc. multiple Preliminary Data Sheet: Rev - 6/14/11 (c) 2011 TriQuint Semiconductor, Inc. - 3 of 6 - Part Number 0805CS-270XJLC 0805CS-120XJLC 0805CS-082XJLC G GRM2165C1H180JZ01 9602-1111-018 960590 Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 854565 350 MHz SAW Filter Typical Performance (at room temperature) Preliminary Data Sheet: Rev - 6/14/11 (c) 2011 TriQuint Semiconductor, Inc. - 4 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 854565 350 MHz SAW Filter Mechanical Information Package Information, Dimensions and Marking Package Style: SMP-53 Dimensions: 13.30 x 6.50 x 1.75mm SAWTEK 854565 JJJYHH ID Dot Date Code Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2-6m Ni plating 1.75 NOM. 1.96 MAX. All dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm 0.76 13.3 The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) 2.54 2.18 6.50 2.54 1.17 x 3.76 0.79 1.50 Tape and Reel Information Standard T/R size = 2000 units/reel. All dimensions are in millimeters 2.7 ID dot 24.8 O330 Section A-A 0.3 4.0 2.0 O1.5 A 1.75 11.5 O102 Direction of travel O20.2 O13.0 13.9 24 2.0 2.3 Preliminary Data Sheet: Rev - 6/14/11 (c) 2011 TriQuint Semiconductor, Inc. - 5 of 6 - 7.1 12.0 O1.5 A Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 854565 350 MHz SAW Filter Product Compliance Information ESD Information Solderability Compatible with the latest version of J-STD-020, lead free solder, 260C Caution! ESD-Sensitive Device Refer to Soldering Profile for recommended guidelines. ESD Rating: 1C Value: Passes 1500 V min. Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114 This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). This product also has the following attributes: Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free ESD Rating: C Value: Passes 500 V min. Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 MSL Rating Devices are Hermetic, therefore MSL is not applicable. Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: info-sales@tqs.com Tel: Fax: +1.407.886.8860 +1.407.886.7061 For technical questions and application information: Email: applications.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Preliminary Data Sheet: Rev - 6/14/11 (c) 2011 TriQuint Semiconductor, Inc. - 6 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R)