GL34A thru GL34J Vishay General Semiconductor Surface Mount Glass Passivated Junction Rectifier Major Ratings and Characteristics IF(AV) 0.5 A VRRM 50 V to 600 V IFSM 10 A VF 1.2 V, 1.3 V IR 5.0 A Tj max. 175 C (R) ted* n e t Pa *Glass-plastic encapsulation is covered by Patent No. 3,996,602, brazed-lead assembly to Patent No. 3,930,306 DO-213AA (GL34) Features Mechanical Data * Superectifier structure for high reliability condition * Patented glass-plastic encapsulation technique * Ideal for automated placement * Low forward voltage drop * Low leakage current * Meets environmental standard MIL-S-19500 * Meets MSL level 1, per J-STD-020C * Solder Dip 260 C, 40 seconds Case: DO-213AA, molded epoxy over glass body Epoxy meets UL-94V-0 Flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D E3 suffix for commercial grade, HE3 suffix for high reliability grade (AEC Q101 qualified) Polarity: Two bands indicate cathode end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating Typical Applications For use in general purpose rectification of power supplies, inverters, converters and freewheeling diodes for consumer, automotive and Telecommunication Maximum Ratings (TA = 25 C unless otherwise noted) Standard recovery device: first band is white Symbol Polarity color bands (2nd Band) GL34A GL34B GL34D GL34G GL34J Gray Red Orange Yellow Green Unit Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 V Maximum RMS voltage VRMS 35 70 140 280 420 V Maximum DC blocking voltage VDC 50 100 200 400 600 Maximum average forward rectified current at TT = 75 C IF(AV) 0.5 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 10 A IR(AV) 30 A TJ, TSTG - 65 to + 175 C Max. full load reverse current, full cycle average TA = 55 C Operating junction and storage temperature range Document Number 88634 06-Sep-05 V www.vishay.com 1 GL34A thru GL34J Vishay General Semiconductor Electrical Characteristics (TA = 25 C unless otherwise noted) Parameter Test condition Maximum instantaneous forward voltage Symbol at 0.5 A TA = 25 C TA = 125 C Maximum DC reverse current at rated DC blocking voltage GL34A GL34B GL34D GL34G GL34J Unit 1.3 V 1.2 VF IR 5.0 50 A Typical reverse recovery time at IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 1.5 s Typical junction capacitance at 4.0 V, 1 MHz CJ 4.0 pF Thermal Characteristics (TA = 25 C unless otherwise noted) Parameter Symbol GL34A GL34B RJA RJT Maximum thermal resistance GL34D GL34G GL34J Unit C/W 150(1) 70(2) Notes: (1) Thermal resistance from junction to ambient, 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal (2) Thermal resistance from junction to terminal, 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal Ratings and Characteristics Curves 10 0.5 60 Hz Resistive or Inductive Load 0.4 0.3 0.2 0.1 TJ = TJ max. 8.3 ms Single Half Sine-Wave 8.0 6.0 4.0 2.0 0.375" (9.5 mm) Lead Length 0 25 50 75 100 125 150 Terminal Temperature (C) Figure 1. Forward Current Derating Curve www.vishay.com 2 Peak Forward Surge Current (A) Average Forward Rectified Current (A) (TA = 25 C unless otherwise specified) 175 0 1 10 100 Number of Cycles at 60 Hz Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Document Number 88634 06-Sep-05 GL34A thru GL34J Vishay General Semiconductor 30 Junction Capacitance (pF) Instantaneous Forward Current (A) 10 1 TJ = 25 C Pulse Width = 300 s 1% Duty Cycle 0.1 0.01 0.4 TJ = 25 C f = 1.0 MHz Vsig = 50mVp-p 10 1 0.6 0.8 1.0 1.2 1.4 1 1.6 10 100 Reverse Voltage (V) Instantaneous Forward Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance Instantaneous Reverse Current (A) 10 TJ = 100 C 1 0.1 TJ = 25 C 0.01 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Characteristics Package outline dimensions in inches (millimeters) DO-213AA (GL34) SOLDERABLE ENDS 1st BAND 2nd BAND D2 D1= 0.066 0.060 (1.676) (1.524) 0.022 (0.559) 0.016 (0.406) 0.145 (3.683) 0.131(3.327) D2 = D1 + 0 - 0.008 (0.20) 1st band denotes type and polarity 2nd band denotes voltage type Document Number 88634 06-Sep-05 www.vishay.com 3 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1