GS18B 18W AC-DC Industrial Adaptor series Features : Universal AC input / Full range No load power consumption<0.3W Energy efficiency Level Comply with EISA 2007, NRCan, AU/NZ MEPS and EU ErP 2 pole AC inlet IEC320-C8 Class power (without earth pin) Protections: Short circuit / Overload / Over voltage Pass LPS Fully enclosed plastic case LED indicator for power on 2 years warranty SPECIFICATION GS18B05-P1J GS18B07-P1J GS18B09-P1J GS18B12-P1J GS18B15-P1J GS18B18-P1J GS18B24-P1J GS18B28-P1J GS18B48-P1J ORDER NO. SAFETY MODEL NO. DC VOLTAGE GS18B07 GS18B09 GS18B12 GS18B15 GS18B18 GS18B24 GS18B28 7.5V 9V 12V 15V 18V 24V 28V 48V 3.0A 2.0A 2.0A 1.50A 1.20A 1.0A 0.75A 0.64A 0.375A CURRENT RANGE 0 ~ 3.0A 0 ~ 2.0A 0 ~2.0A 0 ~ 1.50A 0 ~ 1.20A 0 ~ 1.0A 0 ~ 0.75A 0 ~ 0.64A 0 ~ 0.375A RATED POWER (max.) 15W 15W 18W 18W 18W 18W 18W 18W 18W 80mVp-p 80mVp-p 80mVp-p 100mVp-p 150mVp-p 180mVp-p 240mVp-p 240mVp-p RIPPLE & NOISE (max.) Note.3 50mVp-p VOLTAGE TOLERANCE Note.4 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% LINE REGULATION Note.5 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION Note.6 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% 86% 86.5% 87% SETUP, RISE, HOLD UP TIME 500ms, 20ms, 50ms/230VAC VOLTAGE RANGE 90 ~ 264VAC 135 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 79.5% AC CURRENT INRUSH CURRENT (max.) 0.5A / 100VAC 85% OVERLOAD SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC NOTE 85% 0.25mA / 240VAC WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION CONNECTOR 85% 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 135% rated output voltage Protection type : Clamp by zener diode, output short 0 ~ +50 (Refer to "Derating Curve") 20% ~ 90% RH non-condensing -20 ~ +85, 10 ~ 95% RH OVER VOLTAGE OTHERS 45A / 230VAC 83% LEAKAGE CURRENT(max.) PROTECTION (Note. 7) 82% 500ms, 20ms, 15ms/115VAC at full load ND INPUT GS18B48 RATED CURRENT NR OUTPUT GS18B05 Note.2 5V EMC EMISSION EMC IMMUNITY MTBF DIMENSION 0.03% / (0 ~ 40) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, CSA C22.2, TUV EN60950-1, CCC GB4943, EAC TP TC 004 approved I/P-O/P:4242VDC I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55032 Class B, EN61000-3-2,3, FCC PART 15 / CISPR22 class B, GB9254, GB17625.1, EAC TP TC 020 Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A, EAC TP TC 020 500Khrs min. MIL-HDBK-217F(25) PACKING PLUG 79*54*33mm (L*W*H) 210g ; 60pcs / 13.5kg / CARTON See page 2 ; Other type available by customer requested CABLE See page 2 ; Other type available by customer requested 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 20% to 100% rated load. 7.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) File Name:GS18B-SPEC 2018-01-22 GS18B 18W AC-DC Industrial Adaptor Mechanical Specification series Unit:mm UL1185 16AWG 123050mm for 5~12V UL1185 18AWG 183050mm for 15~48V 7010mm POWER LED C"+" 110.5mm ID 2.1 x OD 5.5 79 NR NAME PLATE Plug Assignment 33 54 ND Standard plug: P1J P1J P/N OUTPUT CENTER + Static Characteristics Derating Curve 100 90 LOAD (%) LOAD (%) 100 70 80 70 60 50 40 0 10 20 30 40 AMBIENT TEMPERATURE () 50 90 95 100 110 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:GS18B-SPEC 2018-01-22