FOC-M12-MNNA-TC... M12 FO transceivers Data sheet 103995_en_02 1 (c) PHOENIX CONTACT 2015-01-28 Description The FO transceiver is available in two versions. - FOC-M12-MNNA-TC-1300 for applications with 50/125 m, 62.5/125 m or 200/230 m fibers - FOC-M12-MNNA-TC-650 for applications with 980/1000 m fibers The FO transceiver features a high-speed transmitter and receiver circuit with a 1310 nm or 650 nm optical wavelength at high optical power. This makes the M12 transceiver an ideal alternative in data transmission systems with fiber optics. An I2C interface ensures that the transceiver is efficiently monitored and managed. Due to the high data transmission rate of 125 Mbps, the optical characteristics, and connection technology for the fiber optics, the M12 transceiver offers a wealth of application options: - Optical networks - Fast Ethernet - Industrial electronics - Power electronics 1.1 - - - - - - - - - Properties 125 Mbps +3.3 V power supply PECL inputs/outputs Signal Detect (SD) output I2C management interface Metal housing Pin connector pattern in accordance with 61754-27 Ambient temperature: -40C... +85 C RoHS-compliant FOC-M12-MNNA-TC-1300 - - - - 1310 nm wavelength -19dBm output power (50/125 m) -30 dBm receiver sensitivity Suitable for 50/125 m, 62.5/125 m and 200/230 m FOC-M12-MNNA-TC-650 - - - - 650 nm wavelength -4 dBm output power (980/1000 m) -20 dBm receiver sensitivity Suitable for 980/1000 m To optimize transmission performance and to achieve the maximum transmission path, correctly pre-assembled fiber optic connectors are required. Loads that exceed the specified limit values can cause permanent damage to the component. The limit values represent the load limits of the component. Make sure you always use the latest documentation. It can be downloaded at phoenixcontact.net/products. This data sheet is valid for all products listed on the following page: FOC-M12-MNNA-TC... 2 Ordering data Fiber optic transceiver Description Order No. Pcs. / Pkt. M12 FO transceiver, duplex, wavelength: 650 nm for 125 Mbps, for POF and FOC-M12-MNNA-TC-650 PCF fibers, for PCB mounting, M16 fastening thread, with sealing cap, including IC interface for transceiver monitoring and management Type 1416716 1 M12 FO transceiver, duplex, wavelength: 1300 nm for 125 Mbps, for GOF fi- FOC-M12-MNNA-TC-1300 bers, for PCB mounting, M16 fastening thread, with sealing cap, including IC interface for transceiver monitoring and management 1416729 1 Accessories Description Type Order No. Pcs. / Pkt. M12 fiber optic coupler, duplex, suitable for all fibers, with wall bracket, IP65 degree of protection FOC-M12-BU/BU 1416677 1 Assembled FO cable, round cable, 980/1000 m POF fibers, for in- 1 m stallation inside buildings 2m M12 FO to M12 FO 5m FOC-PN-B-1000/M12-C/SCRJ/1 1408865 1 FOC-PN-B-1000/M12-C/SCRJ/2 1408864 1 FOC-PN-B-1000/M12-C/SCRJ/5 1416648 1 Assembled FO cable, round cable, 980/1000 m POF fibers, for in- 1 m stallation inside buildings 2m M12 FO to SCRJ/IP20 5m FOC-PN-B-1000/M12-C/M12-C/1 1408871 1 FOC-PN-B-1000/M12-C/M12-C/2 1408870 1 FOC-PN-B-1000/M12-C/M12-C/5 1416680 1 Assembled FO cable, round cable, 200/230 m PCF-GI fibers, for installation inside buildings 1m FOC-HCS-GI-1005/M12-C/M12-C/1 1408873 1 2m FOC-HCS-GI-1005/M12-C/M12-C/2 1408872 1 M12 FO to M12 FO 5m FOC-HCS-GI-1005/M12-C/M12-C/5 1416693 1 Assembled FO cable, round cable, 200/230 m PCF-GI fibers, for installation inside buildings 1m FOC-HCS-GI-1005/M12-C/SCRJ/1 1408867 1 2m FOC-HCS-GI-1005/M12-C/SCRJ/2 1408866 1 M12 FO to SCRJ/IP20 5m FOC-HCS-GI-1005/M12-C/SCRJ/5 1416651 1 Assembled FO cable, round cable, 50/125 m GOF-MM fibers, for installation inside buildings 1m FOC-M12-M12-GB02/2 1408874 1 2m FOC-M12-M12-GB02/1 1408875 1 M12 FO to M12 FO 5m FOC-M12-M12-GB02/5 1416703 1 Assembled FO cable, round cable, 50/125 m GOF-MM fibers, for installation inside buildings 1m FOC-M12-LC:A-GB02/1 1408869 1 2m FOC-M12-LC:A-GB02/2 1408868 1 M12 FO to LC duplex 5m FOC-M12-LC:A-GB02/5 1416664 1 3 Limit values Loads that exceed the limit values can cause permanent damage to the component. The limit values represent the load limits of the component. Continuous operation with these values is not recommended, as this may jeopardize the reliability of the component. The FO transceiver, connectors, and couplings should only be mounted finger tight. Limit values Operating temperature -40 C ... +85C Storage temperature -40 C ... +100C Soldering temperature 2 mm from housing, t 5 s 260C Supply voltage 4V Data input voltage -0.5 V ... 4 V Differential input voltage 2 V (peak-to-peak with FOC-M12-MNNA-TC-1300) PECL output current -50 mA ... +50 mA Electrostatic air discharge in acc. with EN 61000-6-2 8 kV Electrostatic contact discharge in acc. with EN 61000-6-2 4 kV Immunity of electrical field in accordance with EN 61000-6-2 10 V/m 2/8 PHOENIX CONTACT 103995_en_02 FOC-M12-MNNA-TC... 4 Technical data General data Storage temperature -40 C ... 100 C Ambient temperature -40 C ... 85 C Supply voltage 3 V ... 3.6 V, typical 3.3 V Differential input voltage 1 V ... 1.8 V, typical 1.4 V Current carrying capacity 50 Data rate 125 Mbps Humidity 5 % ... 95 % Transmitter FOC-M12-MNNA-TC-650 FOC-M12-MNNA-TC-1300 Maximum wavelength max 625 nm ... 675 nm, typical 650 nm 1280 nm ... 1340 nm, typical 1310 nm Average optical output voltage -8 dBm ... -5 dBm -21 dBm ... -18 dBm 980/1000 m, 50 % DC, NA 0.5 50/125 m, 50 % DC, NA 0.2 Current consumption 70 mA ... 80 mA 90 mA ... 120 mA Rise time 2.5 ns 1.8 ns 1.8 ns Fall time 2.5 ns Data input current for logical "0" at least -50 A at least -50 A Data input current for logical "1" maximum +50 A maximum +50 A Data input voltage for logical "0" -1.81 V ... -1.475 V -1.81 V ... -1.475 V Data input voltage for logical "1" -1.165 V ... -0.88 V -1.165 V ... -0.88 V Receiver FOC-M12-MNNA-TC-650 FOC-M12-MNNA-TC-1300 Maximum receiver sensitivity -25 dBm -31 dBm Maximum input power At least 2 dBm at least -3 dBm Current consumption 70 mA ... 80 mA 70 mA ... 80 mA (no load) Threshold value for signal detection -20 dBm -29.2 dBm Signal detection hysteresis 1.5 dB ... 6 dB, typical 3 dB 1.5 dB ... 5 dB, typical 2.5 dB Maximum response time, signal detection 10 s 10 s Maximum fall time, signal detection 10 s 10 s Signal detection output voltage log. 0 -1.83 V ... -1.55 V -1.83 V ... -1.55 V Signal detection output voltage log. 1 -1.08 V ... -0.88 V -1.08 V ... -0.88 V Data output voltage log. 0 -1.83 V ... -1.55 V -1.83 V ... -1.55 V Data output voltage log. 1 -1.08 V ... -0.88 V -1.08 V ... -0.88 V Data output rise time 20 % ... 80 % 2.2 ns 2.2 ns Data output fall time 80 % ... 20 % 2.2 ns 2.2 ns Bit error rate <1E-10 <1E-10 = 650 nm, at 125 Mbps, Pin = -10 dBm, PRBS23 = 1300 nm, at 125 Mbps, Pin = -10 dBm, PRBS23 103995_en_02 PHOENIX CONTACT 3/8 FOC-M12-MNNA-TC... 5 Dimensions 6 5.1 Dimensional drawing 22 O25 Figure 1 5 6 7 5 8 4 9 3 10 2 11 1 12 Dimensions (in mm) Drilling diagram Figure 3 5x1,778 O0,8 O23 0,889 O1,6 120 5,65 11,3 Figure 2 M12x1 3x1 12xO0,48 M16x1,5 23 19 5.2 13,5 3 7 Pin assignment Pin 1 2 3 4 5 6 7 8 9 10 11 12 View of the component side Name RD+ RDSD RxVcc RxGnd SDA Sclk TDTD+ TxDis TxGnd TxVcc Function Receive Data Out+ Receive Data OutSignal Detect +3.3 V Receiver GND Receiver I2C Serial Data IO I2C Serial Clock Input Transmit Data InTransmit Data In+ Disable Transmitter Input GND Transmitter +3.3 V Transmitter Drilling diagram (in mm) 7 Notes Mounting The FO transceiver, connectors, and couplings should only be mounted finger tight. Achievable transmission paths FOC-M12-MNNA-TC-1300 is designed for 50/125 m fibers. The maximum achievable transmission paths are 2500m. FOC-M12-MNNA-TC-650 is designed for 980/1000 m fibers. The maximum achievable transmission paths are 75m. To optimize transmission performance and to achieve the maximum transmission path, correctly pre-assembled fiber optic connectors are required. 4/8 PHOENIX CONTACT 103995_en_02 FOC-M12-MNNA-TC... 8 External wiring NOTE: To optimize the function of the transceiver, a decoupling of the supply voltage and a cable termination is required as shown in Figure 4. NOTE: The decoupling capacitors and termination resistors should be as close as possible to the inputs of the transceiver or the LVPECL receiver. Transceiver La Vcc = 3,3V 82 4 RX Vcc 1F 82 100nF 1 DOUT + 2 DOUT - LVPECL Receiver 130 5 RX GND 130 La Vcc = 3,3V LVPECL Driver 82 1F 100nF 12 TX Vcc 82 8 DIN 9 DIN + 130 Figure 4 130 11 TX GND External wiring Ferrites (La): Typical impedance: 120 at 100 MHz Maximum DC resistance: 0.15 at 200 mA 103995_en_02 PHOENIX CONTACT 5/8 FOC-M12-MNNA-TC... 9 Block diagram RD+ RDSD RxGnd RxVcc SDA SCLK 1 2 PRE-AMP POST-AMP Quantizer 3 5 4 6 7 Management TxDisable 10 TxVcc TxGnd TD+ TD- Figure 5 12 11 LED Driver 9 8 Block diagram 10 I2C interface 10.1 I2C addresses Address (hex) 00-5F 60-7F 80-FF Field size (byte) 96 32 128 Address (hex) 00-27 Field size (byte) 40 28-37 38-5B 5C-5E 5F 60-69 6A-6D 6E 6F 70-71 72-73 74-75 16 36 3 1 10 4 1 1 2 2 2 6/8 PHOENIX CONTACT Serial address = A0 (hex) Name Description Serial ID GP NVRAM; R/W under valid OEM password Vendor Specific Vendor-specific EEPROM Reserved Reserved for future use Serial address = A2 (hex) Name Description Alarm and Warning High/low limits for warnings and alarms Threshold Reserved Reserved - do not write; reads undefined Calibration Constants Numerical constants for external calibration Reserved Reserved - do not write; reads undefined Checksum GP NVRAM; R/W under valid OEM password Analog Data Real-time analog parameter data Reserved Reserved - do not write; reads undefined Control/Status Bits Control and status bits Reserved Reserved - do not write; reads undefined Alarm Flags Alarm status bits; read only Reserved Reserved - do not write; reads undefined Warning Flags Warning status bits; read only 103995_en_02 FOC-M12-MNNA-TC... Address (hex) 76-77 78-7B 7C-7F 80-F7 F8-F9 FA Field size (byte) 2 4 4 120 2 1 FB FC-FD FE FF 1 2 1 1 Serial address = A2 (hex) [...] Name Description Reserved Reserved - do not write; reads undefined OEMPW OEM password entry field Reserved Reserved - do not write; reads undefined User Scratchpad User writeable EEPROM Reserved Reserved - do not write; reads undefined USRPWSET User password setting; read/write using any password; returns zero otherwise USRPW Entry field for user password POH Power ON hour meter result; read only; Data Ready Flags Data ready bits for each measured parameter; read only User Control End-user control and status bits Address (hex) 00-3F 40-7F 80-BF C0-FF Field size (byte) 64 64 64 64 Serial address = A4 (hex) Name Description APCLUTn APC look-up table MODLUTn VMOD look-up table IFLTUT Bias current fault threshold look-up table EOLLUTn Bias current high alarm look-up table Field size (byte) 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 Serial address = A6 (hex) Name Description OEMCFG0 Control and status bits OEMCFG1 Control and status bits OEMCFG2 Control and status bits APCSET0 APC setpoint 0 APCSET1 APC setpoint 1 APCSET2 APC setpoint 2 MODSET DAC setpoint IBFLT Bias current fault comparator threshold TXPFLT TX power fault threshold LOSFLT RX loss fault comparator threshold FLTTMR Fault comparator masking interval timer setting FLTMSK Fault source mask bits OEMPWSET OEM area access password OEMCAL0 OEM calibration register 0 OEMCAL1 OEM calibration register 1 LUTINDX Look-up table index read-back Reserved Reserved for future use APCDAC Reads back current APC DAC setting MODDAC Reads back current MOD setting OEMREAD Reads back OEM calibration data LOSFLTn LOS deassert threshold RXPOT RX-pot tab selection OEMCFG4 Starts selection bits Address (hex) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C-0F 10 11 12 13 14 15 16 17 18 19 103995_en_02 PHOENIX CONTACT 7/8 FOC-M12-MNNA-TC... Address (hex) 1A-1F 20-27 28-47 48-49 4A-57 59-7D 7E-FD FE FF 10.2 Field size (byte) 6 8 32 2 18 37 128 1 1 I2C interface Parameter Low output voltage High input voltage Clock period Data IN setup time Data OUT stable Data Iow to Clk low Data high to Clk high 10.3 Serial address = A6 (hex) [...] Name Description Reserved Reserved for future use POHDATA Power ON hour meter scratchpad RXLUT RX Power calibration look-up table Reserved Reserved for future use CAL Internal calibration slope and offset data Reserved Reserved for future use SCRATCH Scratchpad area MFG_ID 42 DEV_ID Device and die revision IC interface Symbol VOL VIH t1 t2 t3 t4 t5 Value 0.8 V 2.1 V 2.5 s 100 ns 300 ns 100 ns 100 ns Unit (max.) (min.) (min.) (min.) (min.) (min.) (min.) I2C timing t4 t1 t2 t3 t5 CLK Data (Input) Data (Output) Figure 6 103995_en_02 IC timing PHOENIX CONTACT GmbH & Co. KG * 32823 Blomberg * Germany phoenixcontact.com 8/8