EDLM-312FA - PATLITE (U.S.A.)

EDLM

(3 color LED)

EDWM

(5 color LED)

Model: EDLM & EDWM

Explosion-Proof LED Signal Towers

LED

IP66

NPN/PNP

Open collector*

Testing Authority

PTB

Testing Authority

NEC Article 505

New Frontiers for Safety, Security and Comfort

Terminal block

Horizontal

Mount

Wall Mount

Flush Mount

PATLITE, established in 1947, is the world leader in the design, development, manufacture, and

application of visual and audible signaling alarms for industrial and process automation, as well

as for potentially explosive atmospheres and harsh industrial environments.

The EDLM (3 color LED) and EDWM (5 color LED) are innovative LED signaling towers with pres-

sure and flame-proof housing designed specifically for use in potentially flammable and explosive

atmospheres such as chemical, petrochemical, combustible dusts, production of mineral/natural

gas, and even in food industries.

Standards

Connection

Terminal Block

Body

Light Source

Mounting

: Compliance to ATEX and NEC standards.

: Easy wiring for parallel connection to another interlocking device through 2 lead-in ports.

: Easy connection to the signal tower by opening the back.

: Made of aluminum alloy.

: Long life, maintenance-free, LED.

: Wall mount, flush mount and horizonal mount. See below. (Photo shows model EDWM.)

•Brackets included.

*AC 120/230/90-250V types are

NPN compatible only

Explosion-Proof Signal LED Tower

EDLM

(3 color LED) EDWM

(5 color LED)

Classification

ATEX, IEC/EU

Directive 94/9/EC

IEC 60079-10

EN 60079-10

Common in Europe

Zone 0 Zone 1 Zone 2

Common in the USA

Standard Present

Continuously

Present

Intermittently

Present

Abnormally

NEC standard is National Electrical Code.

ATEX directive is CENELEC standard.

EDLM & EDWM are covered by the specifications shown in the shaded areas below

EDLM-302FE

AC/DC 24V

-20℃〜+50℃ (no ice)

45%〜85%RH (Keep from dew condensation)

80〜110kpa

Flashing (60±12 flashes per minute) / Continuous light

IP66

9.8m/s2

Upper & Lower case：

Glass case：

Fitting bracket：

Cable gland：

Aluminum alloy

(Housing finish: Melamine baking finish)

Borosilicate glass

Stainless Steel (sus 316)

Brass

EDWM-5M2FE

AC 90〜250V

EDWM-502FE

AC/DC 24V

Outdoor & Indoor Upright & Sideways

Red/Green/White: 1000mcd

Amber: 700mcd, Blue: 300mcd

4.7kg

EDLM-323FE

AC 230V

Specifications （ATEX）

Explosion Protection

ratings

Ⅱ2G

Ex d ⅡC T6 (Zone1,2)

Ⅱ2D

Ex tD A21 IP66 T80℃ (Zone21,22)

EDLM-312FE

AC 120V

Red/Amber: 52.5mA

Green: 20.0mA

Outdoor & Indoor Upright

Red: 350mcd, Amber: 580mcd

Green: 1300mcd

4.3kg

Red: 22.6mA, Amber: 26.6mA, Green: 17.5mA

Blue/White: 38.9mA

Signal line current

(Per LED module)

Type

Rated voltage

Operating temp.

Operating humidity

Ambient pressure

Lighting pattern

Vibration resistance

Mounting

Luminosity

Mass (Main body)

Material

Operating temp.

Operating humidity

Ambient pressure

Lighting pattern

Vibration resistance

Mounting

Luminosity

Mass (Mainbody)

Material

EDLM-302FA

AC/DC 24V

Outdoor & Indoor　　Upright

Red: 350mcd, Amber: 580mcd

Green: 1300mcd

4.3kg

-25℃〜+50℃ (no ice)

45%〜85%RH (Keep from dew condensation)

80〜110kpa

Flashing (60±12 flashes per minute) / Continuous light

IP66

9.8m/s2

Upper & Lower case：

Glass case：

Fitting bracket：

Aluminum alloy

(Housing finish: Melamine baking finish)

Borosilicate glass

Stainless,Steel (sus 316)

EDWM-5M2FA

AC 90〜250V

EDWM-502FA

AC/DC 24V

Outdoor & Indoor　　Upright & Sideways

Red/Green/White: 1000mcd

Amber: 700mcd, Blue: 300mcd

4.7kg

EDLM-323FA

AC 230V

Specifications （NEC）

Explosion Protection

ratings

Class Ⅰ , Zone 1

AEx d ⅡC T6

EDLM-312FA

AC 120V

Red: 22.6mA, Amber: 26.6mA, Green: 17.5mA

Blue/White: 38.9mA

Red/Amber: 52.5mA

Green: 20.0mA

Type

Rated voltage

Signal line current

(Per LED module)

0120

EDLM, EDWM

PATLITE

Models

Classification Standard Present

Continuously

Present

Intermittently

Present

Abnormally

PATLITE

Models

NEC Article 505

NEC Article 500

ANSI/NFPA 71

ANSI/NFPA 70

Division 1 Division 2

Zone 0 Zone 1 Zone 2

EDLM, EDWM

Model: EDLM & EDWM

Testing Authority

PTB

Testing Authority

NEC Article 505

Dimensions (EDLM, EDWM)

Wiring Diagram

EDLM ( 3 color LED )

Wiring Diagram

EDLM ( 5 color LED )

■EDLM-302FE/FA

■EDLM-312FE/FA

EDLM-323FE/FA

■EDWM-502FE/FA

■EDWM-5M2FE/FA

Red

Orange

Green

Brown

Gray

Yellow

source

Power

external protection fuse

１Ａ

Continuous light

Outer contacts

Flashing

Outer contacts

LED Red

LED Amber

LED Green

Flashing COM

PWR wire

１Ａ

Red

Orange

Green

Yellow

Brown

Gray

Black

Green / Yellow

LED Red

LED Amber

LED Green

Continuous COM

Flashing COM

PWR wire

Continuous light

Outer contacts

Flashing

Outer contacts

source

Power

external protection fuse

Red

Orange

Green

Blue

White

Brown

Gray

Yellow

LED Red

LED Amber

LED Green

LED Blue

LED White

Flashing COM

PWR wire

Continuous light

Outer contacts

Flashing

Outer contacts

１Ａ

external protection fuse

source

Power

１Ａ

source

Power

Red

Orange

Green

Blue

White

Yellow

Brown

Gray

Black

Green / Yellow

LED Red

LED Amber

LED Green

LED Blue

LED White

Continuous COM

Flashing COM

PWR wire

Continuous light

Outer contacts

Flashing

Outer contacts

external protection fuse

(mm)

■installation

347

(Wall-mount)

*ATEXmodel...Standardpart

*NECmodel...NotaStandardpart

218

(Horizonal-mount)

■Bracketforflushmount

■Cablegland*

12335

347

218

（48）

38 90

(140)

Fitting bracket

Plug

Cover

Setscrew

Glass case

152

(415)

(48)

Upper case

Lower case

φ4.4

LED modules

O-ring

φ140

(86)

Lead-in port 1

Lead-in port 2

Terminal block

Earth terminal

126 283

φ120

3/4 NPT 3/4 NPT

M4 Screw

3/4 NPT

(60)

φ9

φ11

φ9

rear view: EDWM (5 color LED)

Manufacturer

To ensure correct use of these products, read the

“Instruction Manual” prior to use.

Failure to follow all safeguards can result in fire,

electric shock, or other accidents.

Specifications are subject to change without notice.

1-7-31 Nishimiyahara, Yodogawa, Osaka, 532-8550

http://www.idec.com

8-8, Matsuyamachi, Chuo-ku, Osaka, Japan

542-0067

International Division, Sales and Marketing Department

TEL.+81-6-6763-8220 FAX.+81-6-6763-8221

Construction Requirements for Explosion Protected Electrical Equipment

noitacifissalc noisiviD 005CENnoitcetorp foorp-noisolpxE

An area where the mixture of explosive fiber is

not normally present, but if it is, only for brief

periods of time.

An area where the mixture of explosive fiber is

constantly present or it can be present during

the normal operation of the plant.

An area where the mixture of explosive dust is

not normally present, but if it is, only for brief

periods of time.

An area where the mixture of explosive dust is

constantly present or it can be present during

the normal operation of the plant.

An area where the mixture of explosive gas is

not normally present, butif it is,only for brief

periods of time.

Class Ⅰ

Gases

Vapors

Class Ⅱ

Dusts

Division 1

Division 2

Division 1

Division 2

Division 1

Division 2

Class Ⅲ

Fibers

An area where the mixture of explosive gas is

constantly present or it can be present during

the normal operation of the plant.

Protection method (ATEX/IEC)

Cassification of the hazardous areas

An area where the mixture of explosive dust

is not normally present, but if it is, only for brief

periods of time.

An area where the mixture of explosive gas is

not normally present, but if it is, only for brief

periods of time.

Zone classification

Gases

Vapors

CENELEC

IEC

Zone 2

An area where the mixture of explosive

dust is constantly present.

Zone 20

An area where the mixture of explosive dust

can be present during the normal operation

of the plant.

Zone 21

Zone 22

Dusts

Cassification of the hazardous areasNEC505

Zone 0

An area where the mixture of explosive gas

is constantly present.

Class Ⅰ

Zone 0

An area where the mixture of explosive gas

can be present during the normal operation

of the plant.

Zone 1 Class Ⅰ

Zone 1

Class Ⅰ

Zone 2

Europe (ATEX Directive / (CENELEC) International (IEC)

North America Class Ⅰ

Explosion-proof

Flame-proof

Increased Safety

Intrinsic Safety

(2 faults)

Intrinsic Safety

(1 fault)

Purged Pressurized

Encapsulation

Non-incendiary

Type-n

Exd

Exe

Exia

Exib

Exp

Exm

Exn

1, 2

0, 1, 2

1, 2

Zone US

Protection

Division

Protection method

CENELEC

ATEX

IEC

IECEx

EN60079-1

EN60079-7

EN60079-11

EN60079-2

EN60079-18

EN60079-15

IEC60079-1

IEC60079-7

IEC60079-11

IEC60079-2

IEC60079-18

IEC60079-15

NEC500

Zone US

Protection

ANSI/ISA

60079-1

ANSI/ISA

60079-7

ANSI/ISA

60079-11

ANSI/ISA

60079-11

ANSI/ISA

60079-2

ANSI/ISA

60079-18

ANSI/ISA

60079-15

NEC505

AExd

AExe

AExia

AExib

AExp

AExe

AExn

1, 2

0, 1, 2

1, 2

FM3615

UL1203

FM3610

UL913

FM3620

NFPA496

FM3611

UL1604

Marking for North America (NEC standard)

NEC500 (Division System)

sedoC erutarepmeTGases Group

Class Ⅰ, Division1, Groups A,B,C,D, T6

NEC505 (Zone System)

Marking for ATEX directive (CENELEC standard)

Area Classification (only type of Ex tD)

Protection method

Explosion-Protected

Protection Codes (only type of Ex tD)

Temperature Class

Ex tD A21 IP66 T80℃

Type of protection

Explosion-Protected

Gases Group

Temperature code

Ex d ⅡC T6

Explosion-Protection Marking

Notified Body Number

CE Marking

Equipment Group