NMR SERIES Isolated 1W Single Output DC-DC Converters SELECTION GUIDE FEATURES Wide Temperature Performance at Full 1 Watt Load, -40C to 85C Industry Standard Pinout Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Order Code (V) (V) (mA) (mA) (%) (pF) kHrs NMR100 5 5 200 290 69 28 1322 NMR101 5 12 83 260 77 33 235 NMR102 5 15 67 253 79 40 127 NMR106 12 5 200 121 69 36 515 NMR107 12 12 83 110 76 58 184 NMR108 12 15 67 110 76 56 111 MTTF1 1kVDC Isolation Efficiency to 79% Power Density up to 0.90W/cm3 5V & 12V Input 5V, 12V & 15V Output Footprint of 1.17cm 2 UL 94V-0 Package Material When operated with additional external load capacitance the rise time of the input voltage will determine the maximum external capacitance value for guaranteed start up. The slower the rise time of the input voltage the greater the maximum value of the additional external capacitance for reliable start up. No Heatsink Required Internal SMD Construction INPUT CHARACTERISTICS Toroidal Magnetics Parameter Fully Encapsulated No External Components Required Conditions Voltage Range Continuous operation, 5V input types Continuous operation, 12V input types Reflected Ripple Current MIN TYP MAX 4.5 10.8 5 12 40 5.5 13.2 60 Units mA p-p TYP MAX Units 1.0 W 1.2 13.4 7.7 7.5 50 %/% V MTTF up to 1.6 Million Hours Custom Solutions Available OUTPUT CHARACTERISTICS No Electrolytic or Tantalum Capacitors Parameter Conditions Rated Power2 Voltage Set Point Accuracy Line Regulation TA= -40C to 85C DESCRIPTION The NMR series of industrial temperature range DC-DC converters are the standard building blocks for on-board distributed power systems. They are ideally suited for providing single rail supplies on primarily digital boards with the added benefit of galvanic isolation to reduce switching noise. Surface mount technology and advanced packaging materials produce rugged reliable performance over an extended temperature range from -40C to 85C. www.dc-dc.com MIN See tolerance envelope High V IN to low V IN 10% load to rated load, 5V output types Load Regulation 10% load to rated load, 12V output types 10% load to rated load, 15V output types Ripple & Noise BW=DC to 20MHz 1.0 12.5 6.9 6.5 30 % mV p-p ABSOLUTE MAXIMUM RATINGS Short-circuit duration 3 Internal power dissipation Lead temperature 1.5mm from case for 10 seconds Input voltage V IN , NME05 types Input voltage V IN , NME12 types 1 second 550mW 300C 7V 15V 1 Calculated using MIL-HDBK-217F with nominal input voltage at full load. 2 See derating curve 3 Supply voltage must be discontinued at the end of the short circuit duration. All specifications typical at TA=25C, nominal input voltage and rated output current unless otherwise specified. NMR SERIES Isolated 1W Single Output DC-DC Converters ISOLATION CHARACTERISTICS Parameter Conditions Isolation Test Voltage Resistance Flash tested for 1 second Viso=1000VDC MIN TYP MAX Units 1000 VDC G 10 GENERAL CHARACTERISTICS Parameter Conditions Switching Frequency 5V input types 12V input types MIN TYP MAX Units 110 160 kHz TEMPERATURE CHARACTERISTICS Parameter Conditions MIN Specification Storage Case Temperature Above Ambient Cooling All output types -40 -50 5V output types All other output types Free air convection TYP MAX Units 85 130 C C 33 28 C PERFORMANCE CHARACTERISTICS tolerance envelope 2.0 +10% +5% +2.5% V nominal temperature derating graph 1.5 -2.5% 1.0 -7.5% 0.5 10 50 Output Load Current (%) Safe Operating Area 0 100 -40 0 50 100 Ambient Temperature (C) 150 MECHANICAL DIMENSIONS 7 Pin SIP 19.50 1.880.50 NMR100 6.00 10.0 PIN 1 VIN 2 GND 4 0V 6 +V 4.60 3.60 1.25 XYYWWi 1 2 4 2.54 0.55 0.45 0.30 0.20 12.70 6 0.55 0.45 Weight: 2.1g All dimensions in mm XX.XX 0.25mm. All pins on a 2.54mm pitch and within 0.25mm of true position. C&D Technologies (NCL) Limited reserve the right to alter or improve the specification, internal design or manufacturing process at any time, without notice. Please check with your supplier or visit our web site to ensure that you have the current and complete specification for your product before use. (c) C&D Technologies (NCL) Limited 2001 NDC NMR.3 No part of this publication may be copied, transmitted or stored in a retrieval system or reproduced in any way including, but not limited to, photography, photocopy, magnetic or other recording means, without prior written permission from C&D Technologies (NCL) Limited. Instructions for use are available from www.dc-dc.com C&D Technologies (NCL) Ltd Tanners Drive, Blakelands North Milton Keynes MK14 5BU, England Tel: +44 (0)1908 615232 Fax:+44 (0)1908 617545 email: info@cdtechno-ncl.com www: http://www.dc-dc.com C&D Technologies (NCL), Inc. 5816 Creedmoor Road, Raleigh NC 27612, USA Tel: +1 (919) 571-9405 Fax: +1 (919) 571-9262 email: info@us.cdtechno-ncl.com