1
V
V
Miniature Basic Switch
Miniature Basic Switch that
Offers High Reliability and
Security
●Wide variation of best-selling microswitches with
switching currents of 10 to 21 A.
●Can be used for interrupting current when doors
are opened or closed.
●Available in two types of cases: thermoplastic resin
and thermosetting resin.
RoHS Compliant
Model Number Legend
V-@@-@@@@
1. Ratings
21: 21 A at 250 VAC
16: 16 A at 250 VAC
15: 15 A at 250 VAC
10: 10 A at 250 VAC
2. Actuator
None : Pin plunger
1 : Short hinge lever
2 : Hinge lever
3 : Long hinge lever
4 : Simulated roller lever
5 : Short hinge roller lever
6 : Hinge roller lever
3. Contact Form
1: SPDT
2: SPST-NC
3: SPST-NO
12 3456
4. Terminals
A : Solder terminals
C2 : Quick-connect terminals (#187)
C : Quick-connect terminals (#250)
5. Maximum Operating Force
6: 3.92 N {400 gf}
5: 1.96 N {200 gf}
4: 0.98 N {100 gf}
Note: These values are for the pin plunger models.
6. Heat Resistance
None : Standard (80°C)
-T : Heat-resistive (150°C)
2
VMiniature Basic Switch
V
List of Models
Ratings 21A 16A
Actuator Terminals Contact form Maximum operating force (OF)
Pin plunger
Solder terminals
(A)
SPDT
3.92N
--- V-16-1A6
SPST-NC --- V-16-2A6
SPST-NO --- V-16-3A6
SPDT
1.96N
--- V-16-1A5
SPST-NC --- V-16-2A5
SPST-NO --- V-16-3A5
SPDT
0.98N
--- ---
SPST-NC --- ---
SPST-NO --- ---
Quick-connect
terminals (#187)
(C2)
SPDT
3.92N
--- V-16-1C26
SPST-NC --- V-16-2C26
SPST-NO --- V-16-3C26
SPDT
1.96N
--- V-16-1C25
SPST-NC --- V-16-2C25
SPST-NO --- V-16-3C25
SPDT
0.98N
--- ---
SPST-NC --- ---
SPST-NO --- ---
Quick-connect
terminals (#250)
(C)
SPDT
3.92N
V-21-1C6 V-16-1C6
SPST-NC V-21-2C6 V-16-2C6
SPST-NO V-21-3C6 V-16-3C6
SPDT
1.96N
--- V-16-1C5
SPST-NC --- V-16-2C5
SPST-NO --- V-16-3C5
SPDT
0.98N
--- ---
SPST-NC --- ---
SPST-NO --- ---
Thermoplastic Case
Refer to "Micro Switch Common Accessories" for Separators (sold separately), Actua tors (sold separately) and Terminal
Connectors (sold separately).
3
VMiniature Basic Switch
V
Ratings 21A 16A
Actuator Terminals Contact form Maximum operating force (OF)
Short hinge lever
Solder terminals
(A)
SPDT
3.92N
--- V-161-1A6
SPST-NC --- V-161-2A6
SPST-NO --- V-161-3A6
SPDT
1.96N
--- V-161-1A5
SPST-NC --- V-161-2A5
SPST-NO --- V-161-3A5
SPDT
0.98N
--- ---
SPST-NC --- ---
SPST-NO --- ---
Quick-connect
terminals (#187)
(C2)
SPDT
3.92N
--- V-161-1C26
SPST-NC --- V-161-2C26
SPST-NO --- V-161-3C26
SPDT
1.96N
--- V-161-1C25
SPST-NC --- V-161-2C25
SPST-NO --- V-161-3C25
SPDT
0.98N
--- ---
SPST-NC --- ---
SPST-NO --- ---
Quick-connect
terminals (#250)
(C)
SPDT
3.92N
V-211-1C6 V-161-1C6
SPST-NC V-211-2C6 V-161-2C6
SPST-NO V-211-3C6 V-161-3C6
SPDT
1.96N
--- V-161-1C5
SPST-NC --- V-161-2C5
SPST-NO --- V-161-3C5
SPDT
0.98N
--- ---
SPST-NC --- ---
SPST-NO --- ---
Hinge lever
Solder terminals
(A)
SPDT
2.45N
--- V-162-1A6
SPST-NC --- V-162-2A6
SPST-NO --- V-162-3A6
SPDT
1.23N
--- V-162-1A5
SPST-NC --- V-162-2A5
SPST-NO --- V-162-3A5
SPDT
0.59N
--- ---
SPST-NC --- ---
SPST-NO --- ---
Quick-connect
terminals (#187)
(C2)
SPDT
2.45N
--- V-162-1C26
SPST-NC --- V-162-2C26
SPST-NO --- V-162-3C26
SPDT
1.23N
--- V-162-1C25
SPST-NC --- V-162-2C25
SPST-NO --- V-162-3C25
SPDT
0.59N
--- ---
SPST-NC --- ---
SPST-NO --- ---
Quick-connect
terminals (#250)
(C)
SPDT
2.45N
V-212-1C6 V-162-1C6
SPST-NC V-212-2C6 V-162-2C6
SPST-NO V-212-3C6 V-162-3C6
SPDT
1.23N
--- V-162-1C5
SPST-NC --- V-162-2C5
SPST-NO --- V-162-3C5
SPDT
0.59N
--- ---
SPST-NC --- ---
SPST-NO --- ---
Refer to "Micro Switch Common Accessories" for Separators (sold separately), Actua tors (sold separately) and Terminal
Connectors (sold separately).
4
VMiniature Basic Switch
V
Long hinge lever
Solder terminals
(A)
SPDT
1.27N
--- V-163-1A6
SPST-NC --- V-163-2A6
SPST-NO --- V-163-3A6
SPDT
0.69N
--- V-163-1A5
SPST-NC --- V-163-2A5
SPST-NO --- V-163-3A5
SPDT
0.34N
--- ---
SPST-NC --- ---
SPST-NO --- ---
Quick-connect
terminals (#187)
(C2)
SPDT
1.27N
--- V-163-1C26
SPST-NC --- V-163-2C26
SPST-NO --- V-163-3C26
SPDT
0.69N
--- V-163-1C25
SPST-NC --- V-163-2C25
SPST-NO --- V-163-3C25
SPDT
0.34N
--- ---
SPST-NC --- ---
SPST-NO --- ---
Quick-connect
terminals (#250)
(C)
SPDT
1.27N
V-213-1C6 V-163-1C6
SPST-NC V-213-2C6 V-163-2C6
SPST-NO V-213-3C6 V-163-3C6
SPDT
0.69N
--- V-163-1C5
SPST-NC --- V-163-2C5
SPST-NO --- V-163-3C5
SPDT
0.34N
--- ---
SPST-NC --- ---
SPST-NO --- ---
Simulated roller
lever
Solder terminals
(A)
SPDT
2.45N
--- V-164-1A6
SPST-NC --- V-164-2A6
SPST-NO --- V-164-3A6
SPDT
1.23N
--- V-164-1A5
SPST-NC --- V-164-2A5
SPST-NO --- V-164-3A5
SPDT
0.59N
--- ---
SPST-NC --- ---
SPST-NO --- ---
Quick-connect
terminals (#187)
(C2)
SPDT
2.45N
--- V-164-1C26
SPST-NC --- V-164-2C26
SPST-NO --- V-164-3C26
SPDT
1.23N
--- V-164-1C25
SPST-NC --- V-164-2C25
SPST-NO --- V-164-3C25
SPDT
0.59N
--- ---
SPST-NC --- ---
SPST-NO --- ---
Quick-connect
terminals (#250)
(C)
SPDT
2.45N
V-214-1C6 V-164-1C6
SPST-NC V-214-2C6 V-164-2C6
SPST-NO V-214-3C6 V-164-3C6
SPDT
1.23N
--- V-164-1C5
SPST-NC --- V-164-2C5
SPST-NO --- V-164-3C5
SPDT
0.59N
--- ---
SPST-NC --- ---
SPST-NO --- ---
Ratings 21A 16A
Actuator Terminals Contact form Maximum operating force (OF)
Refer to "Micro Switch Common Accessories" for Separators (sold separately), Actua tors (sold separately) and Terminal
Connectors (sold separately).
5
VMiniature Basic Switch
V
Short hinge roller
lever
Solder terminals
(A)
SPDT
4.71N
--- V-165-1A6
SPST-NC --- V-165-2A6
SPST-NO --- V-165-3A6
SPDT
2.35N
--- V-165-1A5
SPST-NC --- V-165-2A5
SPST-NO --- V-165-3A5
SPDT
1.18N
--- ---
SPST-NC --- ---
SPST-NO --- ---
Quick-connect
terminals (#187)
(C2)
SPDT
4.71N
--- V-165-1C26
SPST-NC --- V-165-2C26
SPST-NO --- V-165-3C26
SPDT
2.35N
--- V-165-1C25
SPST-NC --- V-165-2C25
SPST-NO --- V-165-3C25
SPDT
1.18N
--- ---
SPST-NC --- ---
SPST-NO --- ---
Quick-connect
terminals (#250)
(C)
SPDT
4.71N
V-215-1C6 V-165-1C6
SPST-NC V-215-2C6 V-165-2C6
SPST-NO V-215-3C6 V-165-3C6
SPDT
2.35N
--- V-165-1C5
SPST-NC --- V-165-2C5
SPST-NO --- V-165-3C5
SPDT
1.18N
--- ---
SPST-NC --- ---
SPST-NO --- ---
Hinge roller lever
Solder terminals
(A)
SPDT
2.45N
--- V-166-1A6
SPST-NC --- V-166-2A6
SPST-NO --- V-166-3A6
SPDT
1.23N
--- V-166-1A5
SPST-NC --- V-166-2A5
SPST-NO --- V-166-3A5
SPDT
0.59N
--- ---
SPST-NC --- ---
SPST-NO --- ---
Quick-connect
terminals (#187)
(C2)
SPDT
2.45N
--- V-166-1C26
SPST-NC --- V-166-2C26
SPST-NO --- V-166-3C26
SPDT
1.23N
--- V-166-1C25
SPST-NC --- V-166-2C25
SPST-NO --- V-166-3C25
SPDT
0.59N
--- ---
SPST-NC --- ---
SPST-NO --- ---
Quick-connect
terminals (#250)
(C)
SPDT
2.45N
V-216-1C6 V-166-1C6
SPST-NC V-216-2C6 V-166-2C6
SPST-NO V-216-3C6 V-166-3C6
SPDT
1.23N
--- V-166-1C5
SPST-NC --- V-166-2C5
SPST-NO --- V-166-3C5
SPDT
0.59N
---
SPST-NC ---
SPST-NO ---
Ratings 21A 16A
Actuator Terminals Contact form Maximum operating force (OF)
Refer to "Micro Switch Common Accessories" for Separators (sold separately), Actua tors (sold separately) and Terminal
Connectors (sold separately).
6
VMiniature Basic Switch
V
Ratings 15A 10A Heat-resistive
Actuator Terminals Contact form Maximum operating force (OF) 15A 10A
Pin plunger
Solder terminals
(A)
SPDT
3.92N
V-15-1A6 --- V-15-1A6-T ---
SPST-NC V-15-2A6 --- --- ---
SPST-NO V-15-3A6 --- --- ---
SPDT
1.96N
V-15-1A5 V-10-1A5 V-15-1A5-T V-10-1A5-T
SPST-NC V-15-2A5 V-10-2A5 --- ---
SPST-NO V-15-3A5 V-10-3A5 --- ---
SPDT
0.98N
--- V-10-1A4 --- V-10-1A4-T
SPST-NC --- V-10-2A4 --- V-10-2A4-T
SPST-NO --- V-10-3A4 --- V-10-3A4-T
Quick-connect
terminals (#187)
(C2)
SPDT
3.92N
V-15-1C26 --- V-15-1C26-T ---
SPST-NC V-15-2C26 --- --- ---
SPST-NO V-15-3C26 --- --- ---
SPDT
1.96N
V-15-1C25 V-10-1C25 V-15-1C25-T V-10-1C25-T
SPST-NC V-15-2C25 V-10-2C25 --- ---
SPST-NO V-15-3C25 V-10-3C25 --- ---
SPDT
0.98N
--- V-10-1C24 --- V-10-1C24-T
SPST-NC --- V-10-2C24 --- ---
SPST-NO --- V-10-3C24 --- ---
Quick-connect
terminals (#250)
(C)
SPDT
3.92N
V-15-1C6 --- V-15-1C6-T ---
SPST-NC V-15-2C6 --- --- ---
SPST-NO V-15-3C6 --- --- ---
SPDT
1.96N
V-15-1C5 V-10-1C5 V-15-1C5-T V-10-1C5-T
SPST-NC V-15-2C5 V-10-2C5 --- ---
SPST-NO V-15-3C5 V-10-3C5 --- ---
SPDT
0.98N
--- V-10-1C4 --- V-10-1C4-T
SPST-NC --- V-10-2C4 --- ---
SPST-NO --- V-10-3C4 --- ---
Short hinge lever
Solder terminals
(A)
SPDT
3.92N
V-151-1A6 --- V-151-1A6-T ---
SPST-NC V-151-2A6 --- --- ---
SPST-NO V-151-3A6 --- --- ---
SPDT
1.96N
V-151-1A5 V-101-1A5 V-151-1A5-T V-101-1A5-T
SPST-NC V-151-2A5 V-101-2A5 --- ---
SPST-NO V-151-3A5 V-101-3A5 --- ---
SPDT
0.98N
--- V-101-1A4 --- V-101-1A4-T
SPST-NC --- V-101-2A4 --- ---
SPST-NO --- V-101-3A4 --- ---
Quick-connect
terminals (#187)
(C2)
SPDT
3.92N
V-151-1C26 --- V-151-1C26-T ---
SPST-NC V-151-2C26 --- --- ---
SPST-NO V-151-3C26 --- --- ---
SPDT
1.96N
V-151-1C25 V-101-1C25 V-151-1C25-T V-101-1C25-T
SPST-NC V-151-2C25 V-101-2C25 --- ---
SPST-NO V-151-3C25 V-101-3C25 --- ---
SPDT
0.98N
--- V-101-1C24 --- V-101-1C24-T
SPST-NC --- V-101-2C24 --- ---
SPST-NO --- V-101-3C24 --- ---
Quick-connect
terminals (#250)
(C)
SPDT
3.92N
V-151-1C6 --- V-151-1C6-T ---
SPST-NC V-151-2C6 --- --- ---
SPST-NO V-151-3C6 --- --- ---
SPDT
1.96N
V-151-1C5 V-101-1C5 V-151-1C5-T V-101-1C5-T
SPST-NC V-151-2C5 V-101-2C5 --- ---
SPST-NO V-151-3C5 V-101-3C5 --- ---
SPDT
0.98N
--- V-101-1C4 --- V-101-1C4-T
SPST-NC --- V-101-2C4 --- ---
SPST-NO --- V-101-3C4 --- ---
Thermosetting case
Refer to "Micro Switch Common Accessories" for Separators (sold separately), Actua tors (sold separately) and Terminal
Connectors (sold separately).
7
VMiniature Basic Switch
V
Hinge lever
Solder terminals
(A)
SPDT
2.45N
V-152-1A6 --- V-152-1A6-T ---
SPST-NC V-152-2A6 --- --- ---
SPST-NO V-152-3A6 --- --- ---
SPDT
1.23N
V-152-1A5 V-102-1A5 V-152-1A5-T V-102-1A5-T
SPST-NC V-152-2A5 V-102-2A5 --- ---
SPST-NO V-152-3A5 V-102-3A5 --- ---
SPDT
0.59N
--- V-102-1A4 --- V-102-1A4-T
SPST-NC --- V-102-2A4 --- ---
SPST-NO --- V-102-3A4 --- ---
Quick-connect
terminals (#187)
(C2)
SPDT
2.45N
V-152-1C26 --- V-152-1C26-T ---
SPST-NC V-152-2C26 --- --- ---
SPST-NO V-152-3C26 --- --- ---
SPDT
1.23N
V-152-1C25 V-102-1C25 V-152-1C25-T V-102-1C25-T
SPST-NC V-152-2C25 V-102-2C25 --- ---
SPST-NO V-152-3C25 V-102-3C25 --- ---
SPDT
0.59N
--- V-102-1C24 --- V-102-1C24-T
SPST-NC --- V-102-2C24 --- ---
SPST-NO --- V-102-3C24 --- ---
Quick-connect
terminals (#250)
(C)
SPDT
2.45N
V-152-1C6 --- V-152-1C6-T ---
SPST-NC V-152-2C6 --- --- ---
SPST-NO V-152-3C6 --- --- ---
SPDT
1.23N
V-152-1C5 V-102-1C5 V-152-1C5-T V-102-1C5-T
SPST-NC V-152-2C5 V-102-2C5 --- ---
SPST-NO V-152-3C5 V-102-3C5 --- ---
SPDT
0.59N
--- V-102-1C4 --- V-102-1C4-T
SPST-NC --- V-102-2C4 --- ---
SPST-NO --- V-102-3C4 --- ---
Long hinge le v er
Solder terminals
(A)
SPDT
1.27N
V-153-1A6 --- V-153-1A6-T ---
SPST-NC V-153-2A6 --- --- ---
SPST-NO V-153-3A6 --- --- ---
SPDT
0.69N
V-153-1A5 V-103-1A5 V-153-1A5-T V-103-1A5-T
SPST-NC V-153-2A5 V-103-2A5 --- ---
SPST-NO V-153-3A5 V-103-3A5 --- ---
SPDT
0.34N
--- V-103-1A4 --- V-103-1A4-T
SPST-NC --- V-103-2A4 --- ---
SPST-NO --- V-103-3A4 --- ---
Quick-connect
terminals (#187)
(C2)
SPDT
1.27N
V-153-1C26 --- V-153-1C26-T ---
SPST-NC V-153-2C26 --- --- ---
SPST-NO V-153-3C26 --- --- ---
SPDT
0.69N
V-153-1C25 V-103-1C25 V-153-1C25-T V-103-1C25-T
SPST-NC V-153-2C25 V-103-2C25 --- ---
SPST-NO V-153-3C25 V-103-3C25 --- ---
SPDT
0.34N
--- V-103-1C24 --- V-103-1C24-T
SPST-NC --- V-103-2C24 --- ---
SPST-NO --- V-103-3C24 --- ---
Quick-connect
terminals (#250)
(C)
SPDT
1.27N
V-153-1C6 --- V-153-1C6-T ---
SPST-NC V-153-2C6 --- --- ---
SPST-NO V-153-3C6 --- --- ---
SPDT
0.69N
V-153-1C5 V-103-1C5 V-153-1C5-T V-103-1C5-T
SPST-NC V-153-2C5 V-103-2C5 --- ---
SPST-NO V-153-3C5 V-103-3C5 --- ---
SPDT
0.34N
--- V-103-1C4 --- V-103-1C4-T
SPST-NC --- V-103-2C4 --- ---
SPST-NO --- V-103-3C4 --- ---
Ratings 15A 10A Heat-resistive
Actuator Terminals Contact form Maximum operating force (OF) 15A 10A
Refer to "Micro Switch Common Accessories" for Separators (sold separately), Actua tors (sold separately) and Terminal
Connectors (sold separately).
8
VMiniature Basic Switch
V
Simulated roller
lever
Solder terminals
(A)
SPDT
2.45N
V-154-1A6 --- V-154-1A6-T ---
SPST-NC V-154-2A6 --- --- ---
SPST-NO V-154-3A6 --- --- ---
SPDT
1.23N
V-154-1A5 V-104-1A5 V-154-1A5-T V-104-1A5-T
SPST-NC V-154-2A5 V-104-2A5 --- ---
SPST-NO V-154-3A5 V-104-3A5 --- ---
SPDT
0.59N
--- V-104-1A4 --- V-104-1A4-T
SPST-NC --- V-104-2A4 --- ---
SPST-NO --- V-104-3A4 --- ---
Quick-connect
terminals (#187)
(C2)
SPDT
2.45N
V-154-1C26 --- V-154-1C26-T ---
SPST-NC V-154-2C26 --- --- ---
SPST-NO V-154-3C26 --- --- ---
SPDT
1.23N
V-154-1C25 V-104-1C25 V-154-1C25-T V-104-1C25-T
SPST-NC V-154-2C25 V-104-2C25 --- ---
SPST-NO V-154-3C25 V-104-3C25 --- ---
SPDT
0.59N
--- V-104-1C24 --- V-104-1C24-T
SPST-NC --- V-104-2C24 --- ---
SPST-NO --- V-104-3C24 --- ---
Quick-connect
terminals (#250)
(C)
SPDT
2.45N
V-154-1C6 --- V-154-1C6-T ---
SPST-NC V-154-2C6 --- --- ---
SPST-NO V-154-3C6 --- --- ---
SPDT
1.23N
V-154-1C5 V-104-1C5 V-154-1C5-T V-104-1C5-T
SPST-NC V-154-2C5 V-104-2C5 --- ---
SPST-NO V-154-3C5 V-104-3C5 --- ---
SPDT
0.59N
--- V-104-1C4 --- V-104-1C4-T
SPST-NC --- V-104-2C4 --- ---
SPST-NO --- V-104-3C4 --- ---
Short hinge roller
lever
Solder terminals
(A)
SPDT
4.71N
V-155-1A6 --- V-155-1A6-T ---
SPST-NC V-155-2A6 --- --- ---
SPST-NO V-155-3A6 --- --- ---
SPDT
2.35N
V-155-1A5 V-105-1A5 V-155-1A5-T V-105-1A5-T
SPST-NC V-155-2A5 V-105-2A5 --- ---
SPST-NO V-155-3A5 V-105-3A5 --- ---
SPDT
1.18N
--- V-105-1A4 --- V-105-1A4-T
SPST-NC --- V-105-2A4 --- ---
SPST-NO --- V-105-3A4 --- ---
Quick-connect
terminals (#187)
(C2)
SPDT
4.71N
V-155-1C26 --- V-155-1C26-T ---
SPST-NC V-155-2C26 --- --- ---
SPST-NO V-155-3C26 --- --- ---
SPDT
2.35N
V-155-1C25 V-105-1C25 V-155-1C25-T V-105-1C25-T
SPST-NC V-155-2C25 V-105-2C25 --- ---
SPST-NO V-155-3C25 V-105-3C25 --- ---
SPDT
1.18N
--- V-105-1C24 --- V-105-1C24-T
SPST-NC --- V-105-2C24 --- ---
SPST-NO --- V-105-3C24 --- ---
Quick-connect
terminals (#250)
(C)
SPDT
4.71N
V-155-1C6 --- V-155-1C6-T ---
SPST-NC V-155-2C6 --- --- ---
SPST-NO V-155-3C6 --- --- ---
SPDT
2.35N
V-155-1C5 V-105-1C5 V-155-1C5-T V-105-1C5-T
SPST-NC V-155-2C5 V-105-2C5 --- ---
SPST-NO V-155-3C5 V-105-3C5 --- ---
SPDT
1.18N
--- V-105-1C4 --- V-105-1C4-T
SPST-NC --- V-105-2C4 --- ---
SPST-NO --- V-105-3C4 --- ---
Ratings 15A 10A Heat-resistive
Actuator Terminals Contact form Maximum operating force (OF) 15A 10A
Refer to "Micro Switch Common Accessories" for Separators (sold separately), Actua tors (sold separately) and Terminal
Connectors (sold separately).
9
VMiniature Basic Switch
V
Contact form
Ratings 15A 10A Heat-resistive
Actuator Terminals Contact form Maximum operating force (OF) 15A 10A
Hinge roller lever
Solder terminals
(A)
SPDT
2.45N
V-156-1A6 --- V-156-1A6-T ---
SPST-NC V-156-2A6 --- --- ---
SPST-NO V-156-3A6 --- --- ---
SPDT
1.23N
V-156-1A5 V-106-1A5 V-156-1A5-T V-106-1A5-T
SPST-NC V-156-2A5 V-106-2A5 --- ---
SPST-NO V-156-3A5 V-106-3A5 --- ---
SPDT
0.59N
--- V-106-1A4 --- V-106-1A4-T
SPST-NC --- V-106-2A4 --- ---
SPST-NO --- V-106-3A4 --- ---
Quick-connect
terminals (#187)
(C2)
SPDT
2.45N
V-156-1C26 --- V-156-1C26-T ---
SPST-NC V-156-2C26 --- --- ---
SPST-NO V-156-3C26 --- --- ---
SPDT
1.23N
V-156-1C25 V-106-1C25 V-156-1C25-T V-106-1C25-T
SPST-NC V-156-2C25 V-106-2C25 --- ---
SPST-NO V-156-3C25 V-106-3C25 --- ---
SPDT
0.59N
--- V-106-1C24 --- V-106-1C24-T
SPST-NC --- V-106-2C24 --- ---
SPST-NO --- V-106-3C24 --- ---
Quick-connect
terminals (#250)
(C)
SPDT
2.45N
V-156-1C6 --- V-156-1C6-T ---
SPST-NC V-156-2C6 --- --- ---
SPST-NO V-156-3C6 --- --- ---
SPDT
1.23N
V-156-1C5 V-106-1C5 V-156-1C5-T V-106-1C5-T
SPST-NC V-156-2C5 V-106-2C5 --- ---
SPST-NO V-156-3C5 V-106-3C5 --- ---
SPDT
0.59N
--- V-106-1C4 --- V-106-1C4-T
SPST-NC --- V-106-2C4 --- ---
SPST-NO --- V-106-3C4 --- ---
SPDT SPST-NC SPST-NO
COM
NC
NO
COM
NC
COM
NO
Refer to "Micro Switch Common Accessories" for Separators (sold separately), Actua tors (sold separately) and Terminal
Connectors (sold separately).
10
VMiniature Basic Switch
V
Contact Specifications
Ratings
Note. The above rating values apply under the following test conditions.
(1) Ambient temperature: 20±2°C
(2) Ambient humidity: 65±5% RH
(3) Operating frequency: 30 operations/min
Approved Standards
UL (UL1054)/CSA (CSA C22.2 No.55)
VDE (EN61058-1)
Consult your OMRON sales representative for specific models
with VDE approvals.
Testing conditions: 5E4 (50,000 operations), for model s of V-21:
T80 (0 to 80°C), for models of V-16: T105 (0 to 105°C)
Characteristics
Note. The data given above are initial values.
*1. The dielectric strength shown in the table indicates a value for models with a Separator .
*2. For the pin plu nger models, the above values apply for use at the fr ee position and t otal travel position. For the lever mod els, they appl y at the tot al travel position.
Close or open circuit of the contact is shorter than 1 ms.
*3. For testing conditions, consul t your OMRON sales representative.
Item Model V-21 V-16 V-15 V-10
Contact Specification Rivet
Material Silver alloy Silver
Gap (standard value) 1 mm
Inrush
current NC 50 A
max. 40 A
max. 30 A
max. 24 A
max.
NO
Minimum applicable load
(reference value) DC5V 160mA
Model Item
Rated voltage Resistive load
V-21 AC250V 21 A
DC125V
DC250V 0.6 A
0.3 A
V-16 AC250V 16 A
DC125V
DC250V 0.6 A
0.3 A
V-15 AC250V 15 A
DC125V
DC250V 0.6 A
0.3 A
V-10 AC250V 10 A
DC125V
DC250V 0.6 A
0.3 A
Rated voltage Model V-21 V-16 V-15 V-10
125 VAC
250 VAC 21A 1/2HP 16A 1/2HP 15A 1/2HP 10A 1/2HP
125 VDC
250 VDC 0.6A
0.3A
Rated voltage Model V-21 V-16
AC250V 20(4)A 16(4)A
Item Model V-10 V-15 V-16 V-21
Permissible operating speed 0.1mm to 1 m/s max. (pin plunger models)
Permissible operating
frequency Mechanical 600 operations/ min max. (pin plunger models)
Electrical 60 operations/min
Insulation resistance 100MΩ min. (at 500 VDC with insulati on tester)
Contact resistance (init i al value) 15mΩ max.
Dielectric strengt h *1
Between terminals of the
same polarity AC1,000V 50/60Hz 1min
Between current-carrying
metal parts and ground AC1,500V 50/60Hz 1min AC1,500V 50/60Hz 1min AC2,000V 50/60Hz 1min
Between each terminals and
non-current-carrying metal
parts AC1,500V 50/60Hz 1min AC1,500V 50/60Hz 1min AC2,000V 50/60Hz 1min
Vibration resistance *2 Malfunction 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance *2 Durability 1,000 m/s2 {approx. 100 G} max.
Malfunction 200 m/s2
{approx. 20G} max. 300 m/s2 {approx. 30 G} max.
Durability *3
Mechanical 50,000,000 operations min. (60 operations/min)
Electrical
300,000 operations min.
(30 operations/min)
Heat resistiv e: 50,000
operations min
(30 operations/min)
100,000 operations min.
(30 operation s/min)
Heat resistive: 20,000
operations min
(30 operation s/min)
100,000 oper ations min.
(30 operations/min)
Degree of protection IEC IP40
Degree of protection again st electric shock Class I
Proof tracking index (PTI) 175
Ambient operati ng temperature -25 to 105°C
(Heat resistive: -25 to 150°C) -25 to 105°C -25 to 80°C
(at ambient humidity of 60% max.) (with no icing or condensation)
Ambient operating humidity 85% max. (f or 5 to 35°C)
Weight Approx. 6.2g (pin plunger models)
11
VMiniature Basic Switch
V
Terminals and Apperance (Unit: mm)
Note. The above is for the SPDT contact specifications. Two terminals will be available for SPST-NO or SPST-NC contact specifications. For terminal positions, refer
to Contact form on page 9.
Mounting Holes (Unit: mm)
Solder terminals (A) Quick-connect terminals (#187) (C2) Quick-connect terminals (#250) (C)
(5.5)
(6.5)
2.9
t=0.5
Three, solder terminals
(10)
(5.5)
(6.5)
2.9
t=0.5
Three, quick-connect terminals (#187)
(10)
(4.9)
(7.7)
3.2
t=0.8
Three, quick-connect terminals (#250)
(12.0)
4.75±0.1
1.6 dia.2.4 dia.
6.35
3.2 *
* Indicates the length to the center
of the 1.6-dia. holes
4.75
±0.1
1.6-dia. terminal hole
6.35
3.2
6.35
±0.1
1.65-dia. terminal hole
8.1
3.95
10.3
±0.1
Two, 3.1-dia. mounting holes or
M3 screw holes
22.2
±0.1
12
VMiniature Basic Switch
V
Dimensions and Operating Characteristics
The following illustrations and drawings are for quick-connect terminals #250 (terminals C). V models with a switching current of 16 A and 11 A incorporate solder
terminals (A) and quick- connect termimals #18 7 (C2). These models are diffe rent from #250 model s in terminal size o nly. Dimensions of solder te rminals (A) and quick-
connect terminal #187 (C2) are omitted. Please refer to the "Terminals and Shapes" on previous page.
The @ is replaced with the code for the terminals. See the "List of Models" for available combina tions of shapes.
Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Note 2. The operating ch aracteristics are for operation in the A direction ( ).
Thermoplastic Case V-21/-16 Models
19.1
39.8±0.8
22.2±0.1
20.2±0.25
φ3.4±0.15
(12.0)
27.8 2.8
3.1+0.13
−0.03
2.8
OP
PT
10.3±0.1 15.9
φ3.1+0.13 hole
−0.03
2.8 1.6
Three, quick-connect
terminals (#250) (t0.8)
10.3
2.84.2
A
●Pin plunge r
V-21-1@6
V-16-1@6
V-16-1@5Operating
characteristics Model V-21-1@6
V-16-1@6V-16-1@5
OF max.
RF min. 3.92N
0.78N 1.96N
0.49N
PT max.
OT min.
MD max.
1.2mm
1.0mm
0.4mm
OP 14.7±0.4mm
●Short hinge lever
V-211-1@6
V-161-1@6
V-161-1@5Operating
characteristics Model V-211-1@6
V-161-1@6V-161-1@5
OF max.
RF min. 3.92N
0.49N 1.96N
0.49N
PT max.
OT min.
MD max.
1.6mm
0.8mm
0.6mm
OP 15.2±0.5mm
19.1
39.8±0.8
22.2±0.1
φ3.4±0.15
(12.0)
27.8 2.8
3.1+0.13
−0.03
2.8
OP
PT
10.3±0.1 15.9
φ3.1+0.13 hole
−0.03
1.6
Three, quick-connect
terminals (#250) (t0.8)
10.3
2.84.3
22.1
A8.1
t=0.5 *
* Stainless-steel lever
●Hinge lever
V-212-1@6
V-162-1@6
V-162-1@5Operating
characteristics Model V-212-1@6
V-162-1@6V-162-1@5
OF max.
RF min. 2.45N
0.25N 1.23N
0.14N
PT max.
OT min.
MD max.
4.0mm
1.6mm
1.5mm
OP 15.2±1.2mm
19.1
39.8
±0.8
22.2
±0.1
φ3.4
±0.15
(12.0)
27.8 2.8
2.8
OP
PT
10.3
±0.1
35.6
±0.8
15.9
φ3.1
+0.13
hole
−0.03
1.6
Three, quick-connect
terminals (#250) (t0.8) 10.3
2.84.3
8.1
t=0.5 *
A
* Stainless-steel lever
3.1
+0.13
−0.03
●Long Hinge Lever Mode ls
V-213-1@6
V-163-1@6
V-163-1@5Operating
characteristics Model V-213-1@6
V-163-1@6V-163-1@5
OF max.
RF min. 1.27N
0.12N 0.69N
0.06N
PT max.
OT min.
MD max.
9.0mm
2.0mm
2.8mm
OP 15.2 mm
+2.6
−3.2
19.1
39.8
±0.8
22.2
±0.1
φ3.4
±0.15
(12.0)
27.8 2.8
3.1
+0.13
−0.03
2.8
10.3
±0.1
15.9
φ3.1
+0.13
hole
−0.03
1.6
10.3
2.84.3
t=0.5 *
59.4
±0.8
OP
PT 8.1
A
Three, quick-connect
terminals (#250) (t0.8)
* Stainless-steel lever
13
VMiniature Basic Switch
V
Note 1. Unless otherwise specif ied, a tolerance of ±0.4 mm applies to all dimensions.
Note 2.The operating characteristics are for operation in the A direction ( ).
●Simulated roller lever
V-214-1@6
V-164-1@6
V-164-1@5Operating
characteristics Model V-214-1@6
V-164-1@6V-164-1@5
OF max.
RF min. 2.45N
0.25N 1.23N
0.14N
PT max.
OT min.
MD max.
4.0mm
1.6mm
1.5mm
OP 18.7±1.2mm
19.1
39.8
±0.8
22.2
±0.1
φ3.4
±0.15
(12.0)
27.8 2.8
3.1
+0.13
−0.03
2.8
10.3
±0.1
15.9
φ3.1
+0.13
hole
−0.03
1.6
10.3
2.84.3
t=0.5 * 8.1
Three, quick-connect
terminals (#250) (t0.8)
* Stainless-steel lever
32.6
±0.8
R3.5 A
OP
PT
19.1
39.8
±0.8
22.2
±0.1
φ3.4
±0.15
(12.0)
27.8 2.8
3.1
+0.13
−0.03
2.8
10.3
±0.1
15.9
φ3.1
+0.13
hole
−0.03
1.6
10.3
t=0.5 *
8.1
A
OP
PT 20.1 5.1
φ4.8×4.8 *2
Three, quick-connect
terminals (#250) (t0.8)
*1. Stainless-steel lever
*2. Polyacetal resin roller
●Short hinge roller lever
V-215-1@6
V-165-1@6
V-165-1@5Operating
characteristics Model V-215-1@6
V-165-1@6V-165-1@5
OF max.
RF min. 4.71N
0.49N 2.35N
0.49N
PT max.
OT min.
MD max.
1.6mm
0.8mm
0.6mm
OP 20.7±0.6mm
19.1
39.8
±0.8
22.2
±0.1
φ3.4
±0.15
(12.0)
27.8 2.8
3.1
+0.13
−0.03
2.8
10.3
±0.1
15.9
φ3.1
+0.13
hole
−0.03
1.6
10.3
t=0.5 * 8.1
Three, quick-connect
terminals (#250) (t0.8)
*1. Stainless-steel lever
*2. Polyacetal resin roller
OP
PT 5.1
φ4.8×4.8 *2
34
±0.8
A
●Hinge roller lever
V-216-1@6
V-166-1@6
V-166-1@5
Operating
characteristics Model V-216-1@6
V-166-1@6V-166-1@5
OF max.
RF min. 2.45N
0.25N 1.23N
0.14N
PT max.
OT min.
MD max.
4.0mm
1.6mm
1.5mm
OP 20.7±1.2mm
14
VMiniature Basic Switch
V
The following dimensions and Operating Characteristics are for both "Not specified: Standard (105°C)" and "-T: Heat-resistive (150°C)" models.
The following illustrations and drawings are for solder terminals (Terminal A). V models with a switching current of 15A and 10A have quick-connect termina ls #187
(C2). These models are different from solder terminal models in terminal size only. Illustratio ns for quick-conn ect terminals #187 (C2) are omitted. Please refer to
"Terminals and Shapes" on page 8.
The @ is replaced with the code for the terminal s.See the "List of Models" for available combinations of shapes.
Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Note 2. The operating ch aracteristics are for operation in the A direction ( ).
Thermosetting Case (V-15/V-10 Models)
Applicable to both Standard (105°C) and Heat-resistive (150°C) models
18.8
37.8±0.8
22.2±0.1
20.2±0.25
φ3.4±0.15
(10)
27.8 2.8
3.1+0.13
−0.03
2.8
OP
PT
10.3±0.1 15.9
φ3.1+0.13 hole
−0.03
2.8
10.3
2.8 4.2
A
t=0.5
Three, solder terminals
●Pin plunge r
V-15-1@6
V-15-1@5
V-10-1@5
V-10-1@4
Operating
characteristics Model V-15-1@6V-15-1@5
V-10-1@5V-10-1@4
OF max.
RF min.
3.92N
078N 1.96N
0.49N 0.98N
0.20N
PT max.
OT min.
MD max.
1.2mm
1.0mm
0.4mm
OP
14.7
±
0.4mm
●Short hinge lever
V-151-1@6
V-151-1@5
V-101-1@5
V-101-1@4
Operating
characteristics Model
V-151-1
@
6V-151-1
@
5
V-101-1
@
5V-101-1
@
4
OF max.
RF min. 3.92N
0.49N 1.96N
0.49N 0.98N
0.15N
PT max.
OT min.
MD max.
1.6mm
0.8mm
0.6mm
OP 15.2±0.5mm
18.8
37.8±0.8
22.2±0.1
φ3.4±0.15
(10)
27.8 2.8
3.1+0.13
−0.03
2.8
OP
PT
10.3±0.1 15.9
φ3.1+0.13 hole
−0.03
10.3
2.8 4.3
22.1 8.1
t=0.5 *
A
t=0.5
Three, solder terminals
* Stainless-steel lever
●Hinge lever
V-152-1@6
V-152-1@5
V-102-1@5
V-102-1@4
Operating
characteristics Model
V-152-1
@
6V-152-1
@
5
V-102-1
@
5V-102-1
@
4
OF max.
RF min. 2.45N
0.25N 1.23N
0.14N 0.59N
0.06N
PT max.
OT min.
MD max.
4.0mm
1.6mm
1.5mm
OP 15.2±1.2mm
35.6±0.8
t=0.5 *
OP
PT 8.1
A
18.8
37.8±0.8
22.2±0.1
φ3.4±0.15
(10)
27.8 2.8
3.1+0.13
−0.03
2.8
10.3±0.1 15.9
φ3.1+0.13 hole
−0.03
10.3
2.8 4.3
t=0.5
Three, solder terminals
* Stainless-steel lever
●Long Hinge Lever Mode ls
V-153-1@6
V-153-1@5
V-103-1@5
V-103-1@4Operating
characteristics Model
V-153-1
@
6V-153-1
@
5
V-103-1
@
5V-103-1
@
4
OF max.
RF min. 1.27N
0.12N 0.69N
0.06N 0.34N
-
PT max.
OT min.
MD max.
9.0mm
2.0mm
2.8mm
9.0mm
3.2mm
2.8mm
OP 15.2 mm
15.2
±
2.6
mm
+2.6
−3.2
59.4
±0.8
t=0.5 *
3.1
+0.13
−0.03
2.8
OP
PT
10.3
±0.1
φ3.1
+0.13
hole
−0.03
8.1
A
18.8
37.8
±0.8
22.2
±0.1
φ3.4
±0.15
(10)
27.8 2.8
15.9
10.3
2.8 4.3
t=0.5
Three, solder terminals
* Stainless-steel lever
15
VMiniature Basic Switch
V
Note 1. Unless otherwise specif ied, a tolerance of ±0.4 mm applies to all dimensions.
Note 2.The operating characteristics are for operation in the A direction ( ).
Precautions
★Please read "Common Precautions" for correct use.
●Soldering
• Connecting to Solder Terminals
Complete the solder ing at the iron tip temperat ure of 250 to
350°C (60W) within 5 seconds, and do not apply any external
force for 1 minute after soldering.
Be sure to apply only the minimum required amount of flux.It
may result in contact failure once the flux penetrates into the
internal part of the Switch.
• Connecting to Quick-connect Terminals #187
Insert the receptacle of quick-connect terminal #187 straight
toward the terminal.
Applying excessive external force horiz ontally or vertically may
cause deformation of terminals and may damage the
housings.
• Connecting to Quick-connect Terminals #250
Insert the receptacle of quick-connect terminal #250 straight
toward the terminal.
Applying excessive external force horiz ontally or vertically may
cause deformation of terminals and may damage the
housings.
●Mounting
Use M3 mounting scre w with plane washers or spring wa shers to
securely mount the Switch.Ti ghten the screws to a torq ue of 0.39
to 0.59N·m {4 to 6 kgf·cm}.
●Simulated roller lever
V-154-1@6
V-154-1@5
V-104-1@5
V-104-1@4
Operating
characteristics Model
V-154-1
@
6V-154-1
@
5
V-104-1
@
5V-104-1
@
4
OF max.
RF min. 2.45N
0.25N 1.23N
0.14N 0.59N
0.06N
PT max.
OT min.
MD max.
4.0mm
1.6mm
1.5mm
OP 18.7±1.2mm
3.1+0.13
−0.03
2.8
10.3±0.1
φ3.1+0.13 hole
−0.03
18.8
37.8±0.8
22.2±0.1
φ3.4±0.15
(10)
27.8 2.8
15.9
10.3
2.8 4.3
32.6±0.8
t=0.5 *
R3.5
OP
PT 8.1
A
t=0.5
Three, solder terminals
* Stainless-steel lever
3.1+0.13
−0.03
2.8
10.3±0.1
φ3.1+0.13 hole
−0.03
18.8
37.8±0.8
22.2±0.1
φ3.4±0.15
（10）
27.8 2.8
15.9
10.3
5.1
OP
PT 20.1
A
t=0.5 *
8.1
φ4.8×4.8 *2
t=0.5
Three, solder terminals
*1. Stainless-steel lever
*2. Polyacetal resin roller
●Short hinge roller lever
V-155-1@6
V-155-1@5
V-105-1@5
V-105-1@4Operating
characteristics Model
V-155-1
@
6V-155-1
@
5
V-105-1
@
5V-105-1
@
4
OF max.
RF min. 4.71N
0.49N 2.35N
0.49N 1.18N
0.15N
PT max.
OT min.
MD max.
1.6mm
0.8mm
0.6mm
OP 20.7±0.6mm
Stainless steel roller for heat-resistive models
3.1+0.13
−0.03
2.8
10.3±0.1
φ3.1+0.13 hole
−0.03
18.8
37.8±0.8
22.2±0.1
φ3.4±0.15
(10)
27.8 2.8
15.9
10.3
5.1
8.1
φ4.8×4.8 *2
34±0.8
OP
PT A t=0.5 *1
t=0.5
Three, solder terminals
*1. Stainless-steel lever
*2. Polyacetal resin roller
●Hinge roller lever
V-156-1@6
V-156-1@5
V-106-1@5
V-106-1@4Operating
characteristics Model
V-156-1
@
6V-156-1
@
5
V-106-1
@
5V-106-1
@
4
OF max.
RF min. 2.45N
0.25N 1.23N
0.14N 0.59N
0.06N
PT max.
OT min.
MD max.
4.0mm
1.6mm
1.5mm
OP 20.7±1.2mm
Stainless steel roller for heat-resistive models
Precautions for Safe Use Precautions for Correct Use
16
VMiniature Basic Switch
V
• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.
• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad
systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious
influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or
equipment, and be sure to provide the system or equipment with double safety mechanisms.
Cat. No. B010-E1-14
0615(0207)(O)
Note: Do not use this document to operate the Unit.
OMRON Corporation
Electronic and Mechanical Components Company Contact: www.omron.com/ecb
