LITE-ON SEMICONDUCTOR STPF1010CT thru 1020CT REVERSE VOLTAGE - 100 to 200 Volts FORWARD CURRENT - 10 Amperes SUPER FAST GLASS PASSIVATED RECTIFIERS ITO-220AB FEATURES M B DIM. K D A C Glass passivated chip Superfast switching time for high efficiency Low forward voltage drop and high current capability Low reverse leakage current High surge capacity Plastic package has UL flammability classification 94V-0 PIN 2 J I Case : ITO-220AB molded plastic Polarity : As marked on the body Weight : 0.06 ounces, 1.70 grams Mounting position : Any Max. mounting torque = 0.5 N.m (5.1 Kgf.cm) H 15.50 10.0 3.00 16.50 10.40 3.50 D E 9.00 2.90 13.46 9.30 3.60 14.22 1.70 N H L PIN 1 PIN 2 CASE PIN 3 1.15 2.70 2.40 0.75 1.00 I J 0.45 0.70 K 3.00 3.30 L 4.36 4.77 M 2.48 2.80 2.80 2.50 N All Dimensions in millimeter G H F G MECHANICAL DATA A B C F 3 E 1 ITO-220AB MIN. MAX. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% SYMBOL CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage STPF1010CT STPF1020CT UNIT 100 70 100 200 140 200 V V V VRRM VRMS VDC Maximum Average Forward Rectified Current @TC=110 I(AV) 10 A Peak Forward Surge Current 8.3ms single half sine-wave @TJ=25 IFSM 55 A 1.1 1.0 1.25 1.20 V IR 10 250 uA CJ 60 pF Maximum Reverse Recovery Time (Note 2) TRR 30 ns Typical Thermal Resistance (Note 3) R0JC 4.0 /W TJ,TSTG -55 to +150 Vdis 2000 V Maximum forward Voltage Pulse Width =300us Duty cycle IF=5A@TJ =25 IF=5A@TJ =125 IF=10A@TJ =25 IF=10A@TJ =125 Maximum DC Reverse Current at Rated DC Blocking Voltage @TJ =25 @TJ =100 Typical Junction Capacitance per element (Note 1) Operating and Storage Temperature Range Dielectric Strengh from terminals to case, AC with t=1 minute, RH<30% VF NOTES : 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Reverse Recovery Test Conditions:IF=0.5A,IR=1.0A,IRR 0.25A. 3. Device mounted on 100 mm x 100 mm x 1.6 mm Cu Plate REV. 2, Aug -2007, KTGC18 RATING AND CHARACTERISTIC CURVES STPF1010CT thru STPF1020CT FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 60 10 50 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE 12 8 40 30 6 20 4 2 0 Pulse Width 8.3ms Single Half-Sine-Wave 10 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0 25 50 75 100 125 150 175 1 2 5 CASE TEMPERATURE , C FIG.3 - TYPICAL REVERSE CHARACTERISTICS 20 50 100 FIG.4 - TYPICAL FORWARD CHARACTERISTICS 100.0 INSTANTANEOUS FORWARD CURRENT ,(A) 100 TJ = 125 C 10.0 TJ = 100 C 1.0 TJ = 25 C 0.1 0.01 .001 10 TJ = 25 C 1.0 PULSE WIDTH 300us 300ua 2% Duty cycle 0.1 0 20 60 140 100 0 0.2 0.4 0.6 FIG.5 - TYPICAL JUNCTION CAPACITANCE 1000 100 TJ = 25 C, f= 1MHz 10 0.1 1 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE , VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) CAPACITANCE , (pF) INSTANTANEOUS REVERSE CURRENT ,(uA) 10 NUMBER OF CYCLES AT 60Hz 4 10 REVERSE VOLTAGE , VOLTS 100 1.8