50 www.ERNI.com/contact/
catalog E 074484 05/02 Edition 4
D-Sub Connectors TMC-Filter series
Female connectors straight and right angle with filter contacts
acc. to DIN 41 625/IEC 807-3, MIL-C-24308
General
Interference-free data transmission in modern systems used in
communication and information technology requires protective
measures wherever signals enter or leave devices and com-
ponents.
The D-Sub connectors from the TMC-Filter series are the ideal
instruments to suppress electro-magnetic interference (EMI) or
radio frequence (RFI).
The line of D-Sub filter connectors has now been extended
with the new range of female filter connectors in straight or
right angle version.
The new female TMC filter connectors have high quality
ceramic capacitors for effective filter function.
Additional design features provided with the TMC filter series
are a very good low-resistance ground connection between
the filters and the D-Sub metal housing.
Main features
• High quality ceramic filters (capacitors)
• Filters with capacitances from 330 pF to 1500pF
• Housing sizes with the pin numbers: 9, 15, 25, 37
• Female versions with straight or right angle contacts
• EMC housing with high shielding efficiency
• Metal housing with laminated ribbing on pin housing to pro-
vide optimum shielding and contacting with socket housing
• Housing on connection side sealed against RF interference
owing to fully encapsulated metal backplane housing
• Very good low-resistance ground connection by means of
solid fixing bolts integrated in connector
• Flexibility for different PCB thickness with pushfit clip from
1.4 up to 4.5 mm
• International approvals
Accessories
For EMI/RFI shielding and ESD protection with the benefit of
easy assembly and disassembly is the new D-Sub cable con-
nector housing KSG 200 the right solution.
51www.ERNI.com/contact/
catalog E 074484 05/02 Edition 4
Design acc. to DIN 41 652, IEC 807-3 A B
Termination Solder termination, straight Solder termination, right angle
Number of pins 2 rows: 9, 15, 25, 37
Temperature range -25°...+85° C
Permissible humidity Annual average ≤80%, max. 100%
Operating current A
at +20° C 5.0 2.8
ambient +70° C 3.0 2.0
temperature +100° C 1.5 1.2
Test voltage, 1 min
Contact/contact V DC 200
Volume resistance mΩ9-37 pins ≤10 9-37 pins ≤25
Insulation resistance ≥5 x 109at 100 VDC
Service life Performance level 2 ≥250 mating cycles
Insertion and withdrawal force 9 pins ≤30 / ≤20
for fully loaded 15 pins ≤50 / ≤33
connector N 25 pins ≤83 / ≤56
37 pins ≤123 / ≤82
Insulating body material Thermoplastic
Inflammability of the plastic UL 94 V-0
Metal housing with surface Steel with Sn over Ni
Contact material Cu alloy
Contact plating Au over Ni
Filter capacitance (pF) 330 470 680 1000 1500
Capacitance tolerance (pF) ± 20%
Electrical and mechanical data
Capacitance tolerances
Insertion loss
Frequency Insertion loss [dB]acc. to MIL-STD 220 at T=25° C; no load
[MHz]
330 pF 470 pF 680 pF 1000 pF 1500 pF
10 3
30 2 7 10 14 20
100 9 18 22 27 31
300 18 27 30 35 39
1000 28 32 37 42 47
1000 31 36 42 46 51
52 www.ERNI.com/contact/
catalog E 074484 05/02 Edition 4
Principle of the pushfit clip for PC board thickness
from 1.4 mm up to 4.5 mm
Ordering information for straight versions
Capacitance value: 1000 pF (other values on request)
Ordering information for right angle versions
Capacitance value: 1000 pF (other values on request)
Number of pins Metal bracket with pushfit clip Metal bracket with pushfit clip
and clinch nut and clinch nut
M3 #4/40
9
15
25
37
104298 104302
104299 104303
104300 104304
104301 104305
Number of pins Thru hole Clinch nut Pushfit with Clinch nut Pushfit clip with
clinch nut clinch nut
M3 #4/40
9
15
25
37
104294 104495 104503 104499 104507
104295 104496 104504 104500 104508
104296 104497 104505 104501 104509
104297 104498 104506 104502 104510
53www.ERNI.com/contact/
catalog E 074484 05/02 Edition 4
Professional and economical interface solututions
D-Sub Pressfit Connectors
straight and right angle versions
right angle assembly height: Standard: 7.3 mm
Eurorstyle: 3.6 mm
High power versions up to 40A
D-Sub Cable Connector Housing KSG 200
High EMI/RFI Shielding and high ESD Protection
Easy assembly and disassembly
Complete kit incl. knurled screws
ERbic Bus Interface Connector System
Profibus, CAN-Bus, Interbus-S and Bitbus versions
Bus keeps running via ERbic, if node is disconnected
Horizontal or vertical cable entry.
IDC Systems acc. to DIN 41 651/IEC 602-13 LPV
PCB Headers with pressfit termination
Assembly heights: Standard and Low Profile
Female Ribbon Cable Connectors
