D-Sub Connectors TMC-Filter series Female connectors straight and right angle with filter contacts acc. to DIN 41 625/IEC 807-3, MIL-C-24308 General Main features Interference-free data transmission in modern systems used in communication and information technology requires protective measures wherever signals enter or leave devices and components. The D-Sub connectors from the TMC-Filter series are the ideal instruments to suppress electro-magnetic interference (EMI) or radio frequence (RFI). * * * * * * * The line of D-Sub filter connectors has now been extended with the new range of female filter connectors in straight or right angle version. * * The new female TMC filter connectors have high quality ceramic capacitors for effective filter function. Additional design features provided with the TMC filter series are a very good low-resistance ground connection between the filters and the D-Sub metal housing. 50 catalog E 074484 * High quality ceramic filters (capacitors) Filters with capacitances from 330 pF to 1500pF Housing sizes with the pin numbers: 9, 15, 25, 37 Female versions with straight or right angle contacts EMC housing with high shielding efficiency Metal housing with laminated ribbing on pin housing to provide optimum shielding and contacting with socket housing Housing on connection side sealed against RF interference owing to fully encapsulated metal backplane housing Very good low-resistance ground connection by means of solid fixing bolts integrated in connector Flexibility for different PCB thickness with pushfit clip from 1.4 up to 4.5 mm International approvals Accessories For EMI/RFI shielding and ESD protection with the benefit of easy assembly and disassembly is the new D-Sub cable connector housing KSG 200 the right solution. www.ERNI.com/contact/ 05/02 Edition 4 Electrical and mechanical data Design acc. to DIN 41 652, IEC 807-3 Termination A B Solder termination, straight Solder termination, right angle Number of pins 2 rows: 9, 15, 25, 37 Temperature range -25...+85 C Annual average 80%, max. 100% Permissible humidity Operating current at ambient temperature A +20 C +70 C +100 C Test voltage, 1 min Contact/contact V DC Volume resistance m 5.0 3.0 1.5 2.8 2.0 1.2 200 9-37 pins 10 9-37 pins 25 5 x 10 at 100 VDC Performance level 2 250 mating cycles Insulation resistance Service life 9 Insertion and withdrawal force for fully loaded connector 9 pins 30 / 20 15 pins 50 / 33 25 pins 83 / 56 37 pins 123 / 82 N Insulating body material Thermoplastic Inflammability of the plastic UL 94 V-0 Metal housing with surface Steel with Sn over Ni Contact material Cu alloy Contact plating Au over Ni Capacitance tolerances Filter capacitance (pF) 330 470 Capacitance tolerance (pF) 680 1000 1500 1000 pF 1500 pF 20% Insertion loss Frequency [MHz] Insertion loss [dB]acc. to MIL-STD 220 at T=25 C; no load 330 pF 470 pF 680 pF 10 3 30 2 7 10 14 20 100 9 18 22 27 31 300 18 27 30 35 39 1000 28 32 37 42 47 1000 31 36 42 46 51 www.ERNI.com/contact/ catalog E 074484 51 05/02 Edition 4 Principle of the pushfit clip for PC board thickness from 1.4 mm up to 4.5 mm Ordering information for straight versions Capacitance value: 1000 pF (other values on request) Number of pins Thru hole Clinch nut clinch nut Pushfit with Clinch nut M3 Pushfit clip with clinch nut #4/40 9 104294 104495 104503 104499 104507 15 104295 104496 104504 104500 104508 25 104296 104497 104505 104501 104509 37 104297 104498 104506 104502 104510 Ordering information for right angle versions Capacitance value: 1000 pF (other values on request) Number of pins Metal bracket with pushfit clip and clinch nut Metal bracket with pushfit clip and clinch nut M3 #4/40 9 104298 104302 15 104299 104303 25 104300 104304 37 104301 104305 52 catalog E 074484 www.ERNI.com/contact/ 05/02 Edition 4 Professional and economical interface solututions D-Sub Pressfit Connectors D-Sub Cable Connector Housing KSG 200 straight and right angle versions right angle assembly height: Standard: 7.3 mm Eurorstyle: 3.6 mm High power versions up to 40A High EMI/RFI Shielding and high ESD Protection Easy assembly and disassembly Complete kit incl. knurled screws ERbic Bus Interface Connector System IDC Systems acc. to DIN 41 651/IEC 602-13 LPV Profibus, CAN-Bus, Interbus-S and Bitbus versions Bus keeps running via ERbic, if node is disconnected Horizontal or vertical cable entry. PCB Headers with pressfit termination Assembly heights: Standard and Low Profile Female Ribbon Cable Connectors www.ERNI.com/contact/ catalog E 074484 53 05/02 Edition 4