Axial Lead & Cartridge Fuses 2AG > Special Fuse > 220 Series 220 Series, Lead-Free 2AG Special Fuse (R) PS E (R) Description The 2AG Special Fuses with various voltage ratings, provide special electric performance as required. Features * In accordance with underwriter's Laboratories Standard UL 248-14 * Available in cartridge and axial lead format with various forming dimensions * RoHS compliant and Lead-free Applications Agency (R) PS E (R) Agency File Number Ampere Range E10480 0003,0004,0010,0011, 0025,0029,0031,0036 E10480 0007,0012,0013,0019, 0037,0044,0045, 0059,0060,0061 NBK200405-E10480A/B/C/D NBK110512-E10480A/B NBK210405-E10480E/F 1A - 3.5A 4A - 5A 6A - 7A LR29862 0003,0004,0007,0010,0011, 0012,0013,0019,0025,0029, 0031,0044,0045,0059 0003-0061 Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. Electrical Characteristics for Series % of Ampere Rating Amp code Opening Time 100% 135% 200% 0007,0012,0013,0019, 0031,0036,0037,0044, 0054,0060,0061 4 hours, Minimum 1 hour, Maximum 1 sec., Maximum % of Ampere Rating Amp code Opening Time 0025,0038,0040, 0045,0059 4 hours, Minimum 1 hour, Maximum 3 secs., Minimum 20 secs., Maximum % of Ampere Rating Amp code Opening Time 100% 150% 0.9A 0010 4 hours, Minimum 15 mins, Maximum 90 secs., Maximum % of Ampere Rating Amp code Opening Time 0.6A 0003,0004,0011 90 secs., Maximum % of Ampere Rating Amp code Opening Time 0.6A 2A 6A 0029 90 secs., Maximum 2 secs., Maximum 0.5 sec., Maximum 100% 135% 200% (c) 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/26/13 220 Series Agency Approvals Axial Lead & Cartridge Fuses 2AG > Special Fuse > 220 Series Electrical Characteristics 0003 0004 0007 0.55 0010 250 0.35 2 5 3 0011 0012 0013 0019 250 350 300 350 1.25 0025 250 0.35 0.375 0.3 0.5 0.75 5 0029 0030 0031 0036 0037 0038 250 250 250 300 300 250 0.5 0040 250 1 0044 350 2 0045 350 7 0.5 0.75 0059 0060 0061 350 350 350 Temperature Rerating Curve 35A@250Vac, 10KA@125Vac 100A@350Vac, 60A@530Vac 35A@250Vac, 10KA@125Vac, 10KA@125Vdc 35A@250Vac, 10KA@125Vac 100A@350Vac 100A@350Vac, 100A@125Vdc 100A@250Vac, 10KA@125Vac, 10KA@125 Vac 35A@250Vac, 10KA@125Vac 35A@250Vac, 10KA@125Vac, 10KA@125Vdc 35A@300Vac, 10KA@125Vac 50A@250Vac 35A@250Vac, 10KA@125Vac, 10KA@125Vdc 100A@350Vac 100A@250Vac, 100A@350Vac, 10KA@125Vac, 10KA@125Vdc 100A@350Vac / 160A@140Vdc 35A@350Vac Agency Approvals Nominal Cold Resistance (Ohms) Nominal Melting 2 I t (A2 sec) 1.3100 1.3100 0.0317 0.490 0.490 4.62 X X 0.4945 1.16 1.3100 0.0497 0.0186 0.0317 0.49 1.50 17.0 4.62 0.1460 9.80 X 1.3100 1.1685 0.5900 0.2650 0.1520 0.0186 0.490 0.580 0.0300 0.365 1.05 267 X X X X 0.6935 1.16 PS E (R) X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 0.1027 2.22 X X X X 0.0698 30.0 X X X X 0.0116 0.2650 0.1520 464 0.365 1.05 X X X X X X X X Average Time Current Curves 100 .250A .375A .500A .750A 1.0A 1.5A 2.0A 2.5A 3A 4A 5A 6A 7A 8A 10A 0.35 0.35 3 Interrupting Rating .100A .200A Amp Code Max Voltage Rating (V) 250 250 350 10 TIME IN SECONDS Ampere Rating (A) 1 0.1 0.01 0.001 0.1 1 10 100 CURRENT IN AMPERES 1000 (c) 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/26/13 Axial Lead & Cartridge Fuses 2AG > Special Fuse > 220 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: Wave Parameter 280 260 Lead-Free Recommendation Preheat: 240 (Depends on Flux Activation Temperature) 220 200 180 160 140 120 100 80 60 (Typical Industry Recommendation) Temperature Minimum: 100 C Temperature Maximum: Preheat Time: 150 C 60-180 seconds Solder Pot Temperature: 260 C Max. Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: 40 230 240 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 20 0 0 30 20 10 Temperature (C) - Measured on bottom side of board 300 Time (Seconds) Note: These devices are not recommended for IR or Convection Reflow process. Cooling Time Preheat Time Solder Iron Temperature: 350 C +/- 5C Heating Time: 5 seconds max. Dwell Time Product Characteristics Material Body: Glass Cap: Nickel-plated brass Leads: Tin-plated Copper Terminal Strength Operating Temperature -55 C to +125 C Thermal Shock MIL-STD-202G, Method 211A, Test Condition A MIL-STD-202G, Method 107G, Test Condition B: (5 cycles - 65C to 125C) Vibration MIL-STD-202G, Method 201A Solderability Reference IEC 60127 Second Edition 2003-01 Annex A Humidity Product Marking Cap1: Brand logo, current and voltage ratings Cap2: Series and agency approval marks Salt Spray Part Numbering System 220 Series Dimensions MIL-STD-202G, Method 103B, Test Condition A: High RH (95%) and Elevated Temp (40 C) for 240 hours MIL-STD-202G, Method 101D, Test Condition B 220 000P Series 4.7 (.184") .635 (.025") 4.5 (.177") 14.48 (.57") 14.48 (.57") 38.1 (1.50") TYP. Packaging Packaging Option Bulk Bulk Reel and Tape Reel and Tape Reel and Tape Reel and Tape Reel and Tape Reel and Tape Packaging Specification N/A N/A EIA 296-E EIA 296-E EIA 296-E EIA 296-E EIA 296-E EIA 296-E (c) 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/26/13 Quantity 1000 1000 1000 1500 1500 1500 1500 2500 Quantity & Packaging Code MX MXSL MRT1 DAT1 DRT1 DRT2 DRT3 ERT1 Reel Size N/A N/A 53mm (2.087") 53mm (2.087") 53mm (2.087") 63mm (2.500") 73mm (2.874") 53mm (2.087")