A Product Line of Diodes Incorporated BCW66H 45V NPN SMALL SIGNAL TRANSISTOR IN SOT23 Features Mechanical Data BVCEO > 45V Case: SOT23 IC = 800mA High Continuous Collector Current Case Material: molded plastic, "Green" molding compound Low Saturation Voltage VCE(sat) < 300mV @ 100mA UL Flammability Classification Rating 94V-0 Complementary PNP Type: BCW68H Moisture Sensitivity: Level 1 per J-STD-020 Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2) Halogen and Antimony Free. "Green" Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability PPAP capable (Note 4) Terminals: Finish - Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight 0.008 grams (approximate) C SOT23 E C B B E Top View Device Symbol Top View Pin-Out Ordering Information (Notes 4 & 5) Part Number BCW66HTA BCW66HQTA Notes: Compliance AEC-Q101 Automotive Marking EH EH Reel size (inches) 7 7 Tape width (mm) 8 8 Quantity per reel 3,000 3,000 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally the same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/. 5. For packaging details, go to our website at http://www.diodes.com/products/packages.html. Marking Information EH BCW66H Document number: DS33003 Rev. 5 - 2 EH = Product Type Marking Code 1 of 5 www.diodes.com April 2013 (c) Diodes Incorporated A Product Line of Diodes Incorporated BCW66H Maximum Ratings (@TA = +25C, unless otherwise specified.) Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Peak Pulse Current Base Current Symbol VCBO VCEO VEBO IC ICM IB Value 75 45 7 800 1000 100 Unit V V V mA mA mA Value 310 350 403 357 350 -55 to +150 Unit Thermal Characteristics (@TA = +25C, unless otherwise specified.) Characteristic Symbol (Note 6) (Note 7) (Note 6) (Note 7) (Note 8) Power Dissipation Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Leads Operating and Storage Temperature Range Notes: PD RJA RJL TJ,TSTG mW C/W C/W C 6. For a device mounted on minimum recommended pad layout 1oz weight copper that is on a single-sided FR4 PCB; device is measured under still air conditions whilst operating in a steady-state. 7. Same as Note 6, except the device is mounted on 15mm X 15mm 1oz copper. 8. Thermal resistance from junction to solder-point (at the end of the leads). 400 Thermal Resistance (C/W) Max Power Dissipation (W) 0.4 0.3 0.2 0.1 0.0 0 25 50 75 100 125 150 Temperature (C) 350 300 250 200 D=0.5 150 100 D=0.1 Single Pulse D=0.2 50 0 100 D=0.05 1m 10m 100m 1 10 100 1k Pulse Width (s) Transient Thermal Impedance Derating Curve Max Power Dissipation (W) 10 Single Pulse. Tamb=25C 1 0.1 10m 100m 1 10 100 1k Pulse Width (s) Pulse Power Dissipation BCW66H Document number: DS33003 Rev. 5 - 2 2 of 5 www.diodes.com April 2013 (c) Diodes Incorporated A Product Line of Diodes Incorporated BCW66H Electrical Characteristics (@TA = +25C, unless otherwise specified.) Characteristic OFF CHARACTERISTICS Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (base open) (Note 9) Emitter-Base Breakdown Voltage Symbol Min Typ Max Unit BVCES 75 -- -- V BVCEO 45 -- -- V ICEO = 10mA BVEBO 7 -- -- -- -- <1 -- <1 -- 20 20 20 V nA A nA IEBO = 10A VCES = 45V VCES = 45V, TA = +150C VEBO = 5.6V 80 180 250 100 -- -- 350 -- -- -- 630 -- -- -- -- 0.3 0.7 2 Collector-Emitter Cut-Off Current ICES Emitter-Base Cut-Off Current ON CHARACTERISTICS (Note 9) IEBO Static Forward Current Transfer Ratio hFE -- Collector-Emitter Saturation Voltage VCE(sat) Base-Emitter Saturation Voltage SMALL SIGNAL CHARACTERISTICS (Note 9) VBE(sat) -- -- -- Transition Frequency fT 100 -- -- MHz Output Capacitance Input Capacitance Cobo Cibo -- -- 8 -- 12 80 pF pF Noise Figure N -- 2 10 dB Turn-On Time ton -- -- 100 ns Turn-Off Time toff -- -- 400 ns Notes: mV V Test Condition IC = 10A IC = 100A, VCE = 10V IC = 10mA, VCE = 1V IC = 100mA, VCE = 1V IC = 500mA, VCE = 2V IC = 100mA, IB = 10mA IC = 500mA, IB = 50mA IC = 500mA, IB = 50mA IC = 20mA, VCE = 10V, f = 100MHz VCB = 10V, f = 1MHz VCB = -0.5V, f = 1MHz IC = 0.2mA. VCE = 5V, RG = 1K IC = 150mA. IB1 = -IB2 = 15mA RL = 150 9. Measured under pulsed conditions. Pulse width 300s. Duty cycle 2% BCW66H Document number: DS33003 Rev. 5 - 2 3 of 5 www.diodes.com April 2013 (c) Diodes Incorporated A Product Line of Diodes Incorporated BCW66H Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. A SOT23 Dim Min Max Typ A 0.37 0.51 0.40 B 1.20 1.40 1.30 C 2.30 2.50 2.40 D 0.89 1.03 0.915 F 0.45 0.60 0.535 G 1.78 2.05 1.83 H 2.80 3.00 2.90 J 0.013 0.10 0.05 K 0.903 1.10 1.00 K1 0.400 L 0.45 0.61 0.55 M 0.085 0.18 0.11 0 8 All Dimensions in mm B C H K M K1 D F J L G Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. Y Z C X BCW66H Document number: DS33003 Rev. 5 - 2 Dimensions Value (in mm) Z 2.9 X 0.8 Y 0.9 2.0 C 1.35 E E 4 of 5 www.diodes.com April 2013 (c) Diodes Incorporated A Product Line of Diodes Incorporated BCW66H IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2013, Diodes Incorporated www.diodes.com BCW66H Document number: DS33003 Rev. 5 - 2 5 of 5 www.diodes.com April 2013 (c) Diodes Incorporated