DP6-1P
industrial relays
www.aecsensors.com Sales Department Tel: (888) 847-6552Page 1 of 2
1C/O
AgSnO2, AgSnO2/Au 3 um
250 V / 220 V
AgSnO2: 12 V AgSnO2/Au 3 um: 100 mV
AgSnO2: 6 A / 250 V AC AgSnO2/Au 3 um: 50 mA / 30 V AC
AgSnO2: 6 A / 24 V DC AgSnO2/Au 3 um: 50 mA / 36 V DC
AgSnO2: 8 mA / 24 V AgSnO2/Au 3 um: 2 mA / 24 V
AgSnO2: 15 A AgSnO2/Au 3 um: 100 mA ❶
6 A
AgSnO2: 1 500 VA AgSnO2/Au 3 um: 1.5 VA
AgSnO2: ≤ 50 mΩ 100 mA, 24 V AgSnO2/Au 3 um: ≤ 25 m Ω 100 mA, 5 V
360 cycles/hour
72 000 cycles/hour
95...230 V
12-24-36 V
24-42-115-230 V AC: 50/60 Hz
AC: ≥ 0.2 UnAC: ≥ 0.5 Un ❷
DC: ≥ 0.1 Un
see Table 1
AC and DC: ≤ 0.7 Un
AC: 0.6...0.85 Un ❷DC: ≤ 0.8 Un ❷
AC: 8 mA < Ip < 10 mA 230 V AC ❷
0.35...2.2 VA
0.3...1.6 W
C250
400 V AC
4 000 V AC
III IEC 61810-5 (PN-IEC 664-1)
3
4 000 V AC
1 000 V AC
AC: 7 ms DC: 6 ms
AC: 15 ms DC: 10 ms
> 0.6 x 1056 A, 250 V AC
> 2 x 1052 A, 250 V AC
1056 A, 30 V DC
≤ 0.3 Nm
> 2 x 107
80 x 6.2 x 93.8 mm
40 g
-40...+70 oC
-40...+55 oC -40...+60 oC 12, 24 V DC
-40...+40 oC 230 V AC ❷-40...+50 oC 230 V DC ❷
IP 20
RTI IEC 61810-7
Contacts
Contact number & arrangement
Contact material
Max. switching voltage AC/DC
Min. switching voltage AC/DC
Rated load AC1
DC1
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity AC1
Resistance - initially
Max. operating frequency
• at rated load AC1
• no load
Input control circuit
Rated voltage 50/60 Hz AC
DC
AC/DC
Must release voltage
Operating range of supply voltage
Must operate voltage
Input polarization current
Rated power consumption AC
DC
Insulation
Insulation category
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• coil - contact
• contact - contact
General data
Operating time (typical value)
Release time (typical value)
Electrical life
• resistive AC1
• cos φ = 0,4
• resistive DC1
Rated torque for screw terminals
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Protection category
Environmental protection
• Relays DP6-1P - with changeover relay, rated load 6 A / 250 V (AC1)
• 35 mm DIN rail mount, EN 50022,
wires connection with screw terminals - 0.2...4 mm2
• Adapted for the co-operation with interconnection strip type DG20
• Equipped in LED green
• Recognitions, certificates, directives:
Standard contact materials and coil rated voltages are marked with bold type.
❶ Max. inrush current 50 mA at voltage 30 V AC or 36 V DC
❷ Refer version PI6-1P-230V AC/DC-10 - relay with anti-disturbance circuit
R
VDE