AO4260 60V N-Channel MOSFET General Description Product Summary The AO4260 uses trench MOSFET technology that is uniquely optimized to provide the most efficient high frequency switching performance. Both conduction and switching power losses are minimized due to an extremely low combination of RDS(ON), Ciss and Coss. This device is ideal for boost converters and synchronous rectifiers for consumer, telecom, industrial power supplies and LED backlighting. VDS 60V 18A ID (at VGS=10V) RDS(ON) (at VGS=10V) < 5.2m RDS(ON) (at VGS =4.5V) < 6.3m 100% UIS Tested 100% Rg Tested SOIC-8 Top View D D D Bottom View D D G G S S S S Absolute Maximum Ratings TA=25C unless otherwise noted Parameter Symbol Drain-Source Voltage VDS Gate-Source Voltage Continuous Drain Current VGS TA=25C Units V 20 V 18 ID TA=70C Maximum 60 14 A Pulsed Drain Current C IDM Avalanche Current C IAS 65 A Avalanche energy L=0.1mH C TA=25C EAS 211 mJ Power Dissipation B Junction and Storage Temperature Range Rev 1: Mar. 2012 3.1 PD TA=70C Thermal Characteristics Parameter Maximum Junction-to-Ambient A Maximum Junction-to-Ambient A D Maximum Junction-to-Lead 130 TJ, TSTG Symbol t 10s Steady-State Steady-State W 2 RJA RJL www.aosmd.com -55 to 150 Typ 31 59 16 C Max 40 75 24 Units C/W C/W C/W Page 1 of 6 AO4260 Electrical Characteristics (TJ=25C unless otherwise noted) Symbol Parameter STATIC PARAMETERS Drain-Source Breakdown Voltage BVDSS IDSS Zero Gate Voltage Drain Current Conditions Min ID=250A, VGS=0V TJ=55C Gate-Body leakage current VDS=0V, VGS=20V VDS=VGS, ID=250A 1.3 ID(ON) On state drain current VGS=10V, VDS=5V 130 100 nA 1.8 2.4 V 4.3 5.2 6.9 8.4 VGS=4.5V, ID=16A 5 6.3 m 70 1 V 4.5 A VGS=10V, ID=18A Static Drain-Source On-Resistance TJ=125C gFS Forward Transconductance VDS=5V, ID=18A VSD Diode Forward Voltage IS=1A,VGS=0V IS Maximum Body-Diode Continuous Current Crss Reverse Transfer Capacitance Rg Gate resistance A 0.68 DYNAMIC PARAMETERS Ciss Input Capacitance Output Capacitance A 5 Gate Threshold Voltage Units V 1 VGS(th) Coss Max 60 VDS=60V, VGS=0V IGSS RDS(ON) Typ VGS=0V, VDS=30V, f=1MHz m S 4940 pF 445 pF 32 pF 0.9 1.4 SWITCHING PARAMETERS Qg(10V) Total Gate Charge 71 100 nC Qg(4.5V) Total Gate Charge 31 45 nC Qgs Gate Source Charge Qgd Gate Drain Charge VGS=0V, VDS=0V, f=1MHz VGS=10V, VDS=30V, ID=18A 0.4 12.5 nC 8.5 nC tD(on) Turn-On DelayTime tr Turn-On Rise Time tD(off) Turn-Off DelayTime tf Turn-Off Fall Time trr Body Diode Reverse Recovery Time IF=18A, dI/dt=500A/s Qrr Body Diode Reverse Recovery Charge IF=18A, dI/dt=500A/s 96 VGS=10V, VDS=30V, RL=1.67, RGEN=3 8.5 ns 8.5 ns 50 ns 15.5 ns 22 ns nC A. The value of RJA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25C. The value in any given application depends on the user's specific board design. B. The power dissipation PD is based on TJ(MAX)=150C, using 10s junction-to-ambient thermal resistance. C. Repetitive rating, pulse width limited by junction temperature TJ(MAX)=150C. Ratings are based on low frequency and duty cycles to keep initialTJ=25C. D. The RJA is the sum of the thermal impedance from junction to lead RJL and lead to ambient. E. The static characteristics in Figures 1 to 6 are obtained using <300s pulses, duty cycle 0.5% max. F. These curves are based on the junction-to-ambient thermal impedance which is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, assuming a maximum junction temperature of TJ(MAX)=150C. The SOA curve provides a single pulse rating. THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE. Rev 1: Mar. 2012 www.aosmd.com Page 2 of 6 AO4260 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 120 100 10V VDS=5V 3.5V 100 4V 80 4.5V 80 ID(A) ID (A) 60 3V 60 125C 40 40 20 20 25C VGS=2.5V 0 0 0 1 2 3 4 1 5 8 2 2.5 3 3.5 4 Normalized On-Resistance 2 6 RDS(ON) (m ) 1.5 VGS(Volts) Figure 2: Transfer Characteristics (Note E) VDS (Volts) Fig 1: On-Region Characteristics (Note E) VGS=4.5V 4 VGS=10V 2 1.8 VGS=10V ID=18A 1.6 17 5 2 VGS=4.5V10 1.4 1.2 ID=16A 1 0.8 0 0 5 0 10 15 20 25 30 ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage (Note E) 25 50 75 100 125 150 175 0 Temperature (C) Figure 4: On-Resistance vs. Junction 18Temperature (Note E) 12 1.0E+02 ID=18A 1.0E+01 10 40 125C 1.0E+00 IS (A) RDS(ON) (m ) 8 6 4 125C 1.0E-01 1.0E-02 1.0E-03 25C 25C 2 1.0E-04 0 1.0E-05 2 6 8 10 VGS (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage (Note E) Rev 1: Mar. 2012 4 www.aosmd.com 0.0 0.2 0.4 0.6 0.8 1.0 1.2 VSD (Volts) Figure 6: Body-Diode Characteristics (Note E) Page 3 of 6 AO4260 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 10 6000 VDS=30V ID=18A Ciss 5000 Capacitance (pF) VGS (Volts) 8 6 4 2 4000 3000 Coss 2000 1000 Crss 0 0 0 10 20 30 40 50 60 Qg (nC) Figure 7: Gate-Charge Characteristics 70 80 0 20 30 40 50 VDS (Volts) Figure 8: Capacitance Characteristics 60 1000.0 TA=25C 100.0 TA=100C RDS(ON) limited 100 ID (Amps) IAR (A) Peak Avalanche Current 1000 10 TA=150C TA=125C 10 10s 10.0 100s 1.0 1ms 10ms TJ(Max)=150C TA=25C 0.1 10s DC 0.0 1 1 0.01 10 100 1000 Time in avalanche, tA ( s) Figure 12: Single Pulse Avalanche capability (Note C) 0.1 1 10 VDS (Volts) 100 1000 Figure 10: Maximum Forward Biased Safe Operating Area (Note F) 10000 TA=25C Power (W) 1000 100 10 1 0.00001 0.001 0.1 10 1000 Pulse Width (s) Figure 11: Single Pulse Power Rating Junction-to-Ambient (Note F) Rev 1: Mar. 2012 www.aosmd.com Page 4 of 6 AO4260 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS Z JA Normalized Transient Thermal Resistance 10 D=Ton/T TJ,PK=TA+PDM.ZJA.RJA 1 In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse RJA=75C/W 0.1 PD 0.01 Single Pulse Ton T 0.001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 Pulse Width (s) Figure 12: Normalized Maximum Transient Thermal Impedance (Note F) Rev 1: Mar. 2012 www.aosmd.com Page 5 of 6 AO4260 Gate Charge Test Circuit & Waveform Vgs Qg 10V + + Vds VDC - Qgs Qgd VDC - DUT Vgs Ig Charge Resistive Switching Test Circuit & Waveforms RL Vds Vds 90% + Vdd DUT Vgs VDC - Rg 10% Vgs Vgs t d(on) tr t d(off) t on tf toff Unclamped Inductive Switching (UIS) Test Circuit & Waveforms L 2 E AR = 1/2 LIAR Vds BVDSS Vds Id + Vdd Vgs Vgs I AR VDC - Rg Id DUT Vgs Vgs Diode Recovery Test Circuit & Waveforms Q rr = - Idt Vds + DUT Vds Isd Vgs Ig Rev 1: Mar. 2012 Vgs L Isd + Vdd t rr dI/dt I RM Vdd VDC - IF Vds www.aosmd.com Page 6 of 6