1
Accessories (Order Separately)
Ordering Information
Connectors and Connector Hold-down Clips
*1. EE-1009- or EE-1010-series Connectors have a builtin locking mechanism to prevent cable disconnection when only the cable is pulled. To remove the
Connector from the Sensor, grip the top and bottom of the Connector firmly and push into the Sensor once before pulling out. The locking mechanism
prevents the Connector from being removed by pulling on the cable only and enables removal only when the Connector (housing) is pulled.
*2. The case (housing) and dispersion pins (for hand-crimping) for EE-1006 Connectors can be ordered separately. Use the EE-1006T Special
Crimping Tool to prepare the Connector.
Applicable Sensor models
EE-SX67@ (A, P, R), EE-SX47@, EE-SY67@, EE-SPY31@/41@, EE-SPX303N/403N, EE-SPW311/411
Type Cable length Model Remarks
Connector
EE-1001
EE-1001-1
L terminal and positive (+) terminal are already short-circuited.
EE-1009 *1
Connector with
Cable
1 m EE-1006 1M
EE-1010 1M *1
2 m
EE-1006 2M 4 conductors
EE-1006D 3 conductors
EE-1006L 2 conductors
EE-1010 2M *1
Connector with
Robot Cable
1 m EE-1010-R 1M *1
2 m EE-1010-R 1M*1
NPN/PNP Conversion
Connector
0.46 m
(total length) EE-2002
Connector Hold-down Clip EE-1006A
For EE-1006, EE-SX670
@
, 470, EE-SY671, and 672 only.
Connector Parts
*2
Case (housing) EE-1006H 100 per carton
Dispersion Pins EE-1006C 500 per carton
Special Crimping Tool EE-1006T
Applicable Sensor models
EE-SX97@-C1, EE-SX97@P-C1
Item Cable length Model Remarks
Connector with Cable 1 m EE-1017 1M
3 m EE-1017 3M
Connector with Robot Cable
1 m EE-1017-R 1M
3 m EE-1017-R 3M
Applicable Sensor models
EE-SX91@@-C1J-R (Pre-wired Connector)
Item Cable length Model Remarks
Connector with Cable 2 m EE-1016-R The robot cable is standard for all models.
Applicable Sensor models
EE-SX67@@-C1J-R (Pre-wired Connector)
Item Cable length Model Remarks
Connector with Cable 2 m EE-1016-R-1 The robot cable is standard for all models.
Applicable Sensor models
EE-SPX74@/84@
Item Cable length Model Remarks
Connector with Cable 1 m EE-1013
Applicable Sensor models
EE-SPX301/401, EE-SPY30@/40@, EE-SPZ301@/401@
Item Cable length Model Remarks
Connector EE-1002
Connector with Cable
1 m EE-1003
NPN/PNP Conversion
Connector
0.46 m
(total length) EE-2001
Connector Hold-down Clip EE-1003A For EE-1003 only.
Handle
Ratchet
Crimping section
Switching knob
Appearance
Sensor
Connector
CSM_PhotoMicro_OP_E_8_1
2
Ratings and Specifications
*1. The Connector has a built-in locking mechanism. To remove the Connector from the Sensor, grip the top and bottom of the Connector
housing, as shown in the following diagram, and then pull out the Connector.
*2. EE-SX67@ and EE-SY67@ are the best used in the light-ON state.
*3. The insertion/removal durability and lock strength apply only to the lock mechanism.
They do not apply to the EE-1001, EE-1001-1, and EE-1006, which do not have lock mechanisms.
Product Connector *1Connector with
Cable *1
Connector with
Robot Cable *1Connector
Connector
(short-circuit-
ed between
positive (+) and
L terminals) *2
Connector with
Cable
Model EE-1009 EE-1010 EE-1010-R EE-1001 EE-1001-1 EE-1006
Item
Appearance
Contact resistance 20 mΩ max. (at 20 mV max., 100 mA max.) 15 mΩ max. (at 100 VDC max.) 10 mΩ max.
(100 VDC max.)
Insertion/removal
durability *350 times min. ---
Insertion strength No. of poles ✕ 6 N max. 50 N max.
Surplus strength
(housing holding strength)
No. of poles ✕ 0.4 N max. --- 20 N max.
Standard cable length --- 1 m, 2 m --- 1 m, 2 m
Lock strength *3No. of poles ✕ 29 N min. ---
Ambient humidity −10 to +60°C−10 to +75°C−10 to 60°C
Material Housing Polybutylene phthalate (PBT)
Contact Phosphor bronze (solder plating)
Applicable
Photomicrosensors
EE-SX67
@
(A,P,R) (Connector Models only), EE-SX47
@
, EE-SY67
@
, EE-SPY31
@
/41
@
, EE-SPX303N/403N,
EE-SPW311/411
Product Connector Connector
with Cable
Connector
with Cable
Connector
with Cable
Connector
with Robot
Cable
Connector with Robot Cable
Model EE-1002 EE-1003 EE-1013 EE-1017 EE-1017-R EE-1016-R EE-1016-R-1
Item
Appearance
Contact resistance
10 mΩ max.
(at 10 mADC
and 1 ADC)
20 mΩ max. (at minute current
of 1 kHz and 500 VDC) 25 mΩ max. (at 10 mA DC and 20 mV max.)
Insertion strength 20 N max. 23.5 N max. 40 N max. 20 N max.
Surplus strength
(housing holding
strength)
15 N min.
(initial)
10 N min. (ten
times)
3.5 N min. 10 N min. 1.5 N min. 15 N min.
Cable length --- 1 m 1 m, 3 m 2 m
Ambient humidity −10 to +75°C−10 to +60°C−10 to +55°C−10 to +60°C−25 to +85°C
Material Housing Nylon
Contact Phosphor bronze (solder plating)
Applicable
Photomicrosensors
EE-SPX301/401, EE-SPY30
@
/
40
@
, EE-SPZ301
@
/401
@
EE-SPX74@/
84@
EE-SX97
@
C1, EE-SX97
@
P-C1
EE-SX91
@
-C1J-R
(Pre-wired
Connector)
EE-SX67
@
-C1J-R
(Pre-wired
Connector)
Sensor
Connector
3
(Unit: mm)
Dimensions Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
Photomicrosensor Connectors and Connector Hold-down Clips
Applicable
Photomicrosensors
EE-SX67@ (A,P,R) (Connector Models only), EE-SX47@, EE-SY67@,
EE-SPY31@/41@, EE-SPX303N/403N, EE-SPW311/411 For EE-SX670@, 470@, EE-SY671, and 672 only.
Connector
EE-1001
13
4
2.54±0.15
2.9±1
0.6
10.8
6
Connector (short-circuited between positive (+) and L terminals)
EE-1001-1
3.9±0.4
2.8±0.1
0.6
10.8
6
5
1.5
0.8
13
4
1.4
2.5
3±0.3
7.62
2.54 5.5±0.4
11
.
8
5.3
2.54
0.6
16.2
20
(4)(3)(2)(1)
2,000 (1,000)
40
Cable:
4-dia. 4-conductor vinyl-insulated round cable
(Conductor cross section: 0.2 mm2, Insulator
diameter: 1.1 mm).
Connector with Cable
EE-1006 2M (EE-1006 1M)
Terminal
Arrangement
(1) Brown
(2) LPink
(3) OUT Black
(4) Blue
1.2
(R1)
2
5.5
R3
4-R1.6
10.2
19.4
21.9
15
25.2
19
12
3.2
2.13
3
3.6
3.4
Connector Hold-down Clip
EE-1006A
(Can be used only with EE-1006
Connectors for the
Photomicrosensors listed
below.)
Material: Stainless steel
4
Photomicrosensor Connectors
Applicable
Photomicrosensors
EE-SX67@ (A,P,R) (Connector Models only), EE-SX47@, EE-SY67@, EE-SPY31@/41@
EE-SPX303N/403N, EE-SPW311/411
Connectors
EE-1009 13
4
2-C1
9
4.5
0.8
1.5
1.2
51.4 2.5
0.6
2.5 2.54
7.62
Connector with Cable
EE-1010 2M (EE-1010 1M)
Connector with Robot Cable
EE-1010-R 2M (EE-1010-R 1M)
0.6
(1)
(2)
(3)
(4)
4
2.54
7.62 13
2-C1
5
13.5 20±5
EE-1010 cable
EE-1010-R cable:
4-dia. 4-conductor vinyl-insulated round cable
(Conductor cross section: 0.2 mm2, Insulator
diameter: 1.1 mm).
2,000
(1,000)
25±5 15±5
1.4
2.5 Terminal Arrangement
(1) Brown
(2) LPink
(3) OUT Black
(4) Blue
5
Photomicrosensor Connectors and Connector Hold-down Clips
Applicable
Photomicrosensors EE-SPX301/401, EE-SPY30@/40@, EE-SPZ301@/401@
Applicable
Photomicrosensors EE-SPX74@/84@
Applicable
Photomicrosensors
EE-SX97@-C1, EE-SX97@P-C1
6
3
22
6
1.20.6
1.2
5.5
OUT
2.5
5
11.5
13.5
16.62
6
16.5
0.25
4
Connector
EE-1002
Connector with Cable
EE-1003
1.75
5
2.5
110.75
4.9
10.7
1,000
±20
3
±1
1
(1)
Brown
(2)
Black
(3)
Blue
Cable:
1.61-dia. 1-conductor vinyl-insulated round cable
(Conductor cross section: 0.33 mm
2
).
Connector Hold-down Clips
(For EE-1003 only)
EE-1003A
14.2
Two,
3.2 dia.
hole
20
25.5
5.7
8
2.9
1
11 1
3.5
4.2
1
2
2
2.5
1.25
1.8
5
5.7
2.5
7.75 20
XHP-3 (JST Mfg.)
1,000 16±2 7±1
9.8
2.9-dia. 3-conductor vinyl-insulated round cable
(Conductor cross section: 0.15 mm2, Insulator diameter: 0.9 mm),
Standard length: 1 m.
(3)
(2)
(1)
Connector with Cable
EE-1013
Terminal Arrangement
(1) Blue GND(0V)
(2) Black OUTPUT
(3) Brown Vcc
Connector with Cable
EE-1017
Connector with Robot Cable
EE-1017-R
Connector with Cable: EE-1017
Vinyl insulated round cord: 4 dia., 4 cores,
(Cross section area of conductor: 0.2 mm2/
insulator: 1.1 mm dia.)
Connector with Robot Cable: EE-1017-R
Robot instrumentation cord: 4 dia., 4 cores,
(Cross section area of conductor: 0.2 mm2/
insulator: 1.1 mm dia.)
2
10
5.8 8 20±5 1,000+5
0
0 25±5 15±5
(8)
(1)
(2)
(3)
(4)
Terminal Arrangement
(1) Brown
(2) 1Black
(3) 2White
(4) Blue
6
NPN to PNP Transistor Output Conversion Connectors
Applicable Photo-
microsensors EE-SX91@-C1J-R (Models with Junction Connectors)
Applicable Photo-
microsensors
EE-SX67@-C1J-R
EE-SX67@P-C1J-R
Applicable
Photomicrosensors
EE-SPX301/401, EE-SPY30@/40@,
EE-SPZ301@/401@
EE-SX67@ (A,P,R) (Connector Models only), EE-SX47@,
EE-SY67@, EE-SPY31@/41@,
EE-SPX303N/403N, EE-SPW311/411
Connector with Robot Cable
EE-1016-R
2
10
5.8810
2.8-dia. 4-conductors robot cable (Conductor cross section: 0.15 mm
2
,
Insulation diameter: 0.8 mm), Standard len
g
th: 2 m.
7162,000
1
2
3
4
Terminal Arrangement
(1) Brown
(2)
OUT2
White
(3) Blue
(4)
OUT1
Black
C
onnector w
i
t
h
C
a
bl
e
(C
onnect
i
on w
i
t
h
R
o
b
ot
C
a
bl
e
)
EE-1016-R-1
2
10
5.8810
2.8-dia. 4-conductors robot cable
(conductor cross-section: 0.15 mm2, insulator
diameter: 0.8 mm), Standard len
g
th: 2 m.
16
2,000
1
2
3
4
Terminal Arrangement
(1) Brown
(2) LPink
(3) Blue
(4) OUT Black
12.5
4.9
10.7 20 200 40 200
Connector side
(sensor side)
8 dia.
12
Cable:
4-dia, 3-conductors vinyl-insulated round cable
(Conductor cross section: 0.2 mm
2
, Insulation diameter: 1.2 mm).
Cable end (end with power output)
NPN/PNP Conversion Connector
EE-2001
Terminal Arrangement
(1) Brown
(2) OUT Black
(3) Blue
11.8
5.3
8 dia.
12
8
16.2 20 200 200
40
Connector side
(sensor side)
Cable:
4-dia, 3-conductors vinyl-insulated round cable
(Conductor cross section: 0.2 mm
2
, Insulation diameter: 1.2 mm).
Cable end (end with power output)
NPN/PNP Conversion Connector
EE-2002 *
Terminal Arrangement
(1) Brown
(2) OUT Black
(3) Blue
*The EE-SX67@ and EE-
SY67@ do not support Light-
ON mode.
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
2011.12
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2011 All Right Reserved.
