Specification(製品規格):RT-375 ISSUE(改訂)7 (Japanese)
2 of 7
2.2 その他の刊行物
American Society for Testing and Materials (ASTM)
D 2671 Standard Methods of Testing Heat-Shrinkable Tubing for Electrical Use
(ASTM刊行物の入手先: the American Society for Testing and Materials, 1916 Race Street, Philadelphia,
Pennsylvania 19103 又はASTM ホームページ http://www.astm.org)
International Organization fo r Standardization (ISO)
ISO 846 Plastics – Evaluation of the action of Microorganisms
(ISO刊行物の入手先:International Organization for Standardization, 1, rue de Varembe, CH-1211 Geneva 20,
Switzerland 又はISOホームページ http://www.iso.ch/iso/en/ISOOnline.frontpage)
SAE International
AMS-DTL-23053 Insulating Sleeving, Electrical, Heat Shrinkable, General Specification for
(SAE刊行物の入手先:SAE International, 400 Commonwealth Drive, Warrendale, PA 15096-0001 又はSAEホ
ームページ http://www.sae.org)
3. 要求項目
3.1 材料
チューブは熱的に安定な変性フッ化ポリマーで製造され、照射によって架橋される。また、均質であり、
傷、欠陥、ピンホール、気泡、継目、クラックおよび介在物が無きこと。
3.2 形状
チューブは Table 3の要求寸法を満足していなければならない。
4. 品質保証事項
4.1 試験の分類
4.1.1 品質確認試験
品質確認試験は製品の品質が要求に合っていることを確認するために提供されたチューブに対しておこ
なう試験であり、本規格に列挙されたすべての試験をおこなわなければならない。