7530A5524 SPECIFICATION CONTROL DRAWING CHEMINAX 75 OHM, AWG 30, 7 STRANDS OF AWG 38, TRIAXIAL CABLE Date 5-9-13 Revision A THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200. CONSTRUCTION DETAILS DIMENSIONS ARE NOMINAL VALUES IN INCHES UNLESS OTHERWISE DESIGNATED. .0120 .053 .070 .086 .103 CONDUCTOR AWG 30, 7 Strands of AWG 38, Silver-Coated High-Strength Copper Alloy DIELECTRIC Rayfoam H Color - White 1st SHIELD AWG 38, Tin-Coated Copper 1st JACKET UXL-ETFE Color - White 2nd SHIELD AWG 38, Tin-Coated Copper ELECTRICAL CHARACTERISTICS CHARACTERISTIC IMPEDANCE 75 3 ohms, Method B CAPACITANCE 17.5 pF/ft. (nominal) VELOCITY OF PROPAGATION 77% (nominal) ADDITIONAL REQUIREMENTS ELECTRICAL CONDUCTOR RESISTANCE 116. ohms/1000 ft. (nominal) INSULATION RESISTANCE (CONDUCTOR TO SHIELD) 10,000 megohms (minimum) for 1000 ft. JACKET FLAWS SPARK TEST IMPULSE TEST 1.0 kV (rms) 6.0 kV (peak) VOLTAGE WITHSTAND CONDUCTOR TO SHIELD SHIELD TO SHIELD 1000 volts (rms) (minimum) 500 volts (rms) (minimum) ENVIRONMENTAL FLAMMABILITY Method B HEAT SHOCK 225C LOW TEMPERATURE-COLD BEND -55C/3.25 inch mandrel VOLTAGE WITHSTAND (Post Environmental) 1000 volts (rms), 1 minute PHYSICAL .119 2nd JACKET Ink Jet Markable ETFE Color - White INSULATION (DIELECTRIC) ELONGATION TENSILE STRENGTH 50% (minimum) 600 lbf/in2 (minimum) JACKET (EACH) ELONGATION TENSILE STRENGTH 150% (minimum) 5000 lbf/in2 (minimum) JACKET THICKNESS (EACH) .006 inch (minimum) .008 inch (nominal) SHIELD COVERAGE (EACH) 90% (minimum) WEIGHT 13.5 lbs/1000 ft. (nominal) Outer jacket color will be white (designated by a "-9)" appended to the part number, e.g. 7530A5524-9) unless otherwise specified. Designate outer jacket color with a dash number in accordance with MIL-STD-681. Other codes and suffixes may be added to the part number, as necessary, to capture any additional requirements imposed by the purchase order. Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. Page 1 of 1 Rayfoam, Cheminax, Raychem, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Raychem Wire & Cable 501 Oakside Avenue Redwood City, California 94063-3800 1-800-227-8816 Fax: 1-650-361-6297 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. (c) 2013 Tyco Electronics Corporation, All rights reserved.