ABM3C
APPLICATIONS:
FEATURES:
303 3 2
Esp e r anza, Ra n c ho San t a M a r g a r ita, Calif o r ni a
926 8 8
t e l 949-546-800 0 | fa x 949-546-80 0 1 | w w w .ab r a c on.c o m
STANDARD SPECIFICATIONS:
OPTIONS & PART IDENTIFICATION:
(Left blank if standard)
Revised: 07.31.14
Visit
www.abracon.com
for Terms & Conditions of Sale
CERTIFIED
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
5.0 x 3.2 x 1.3mm
• Low height; suitable for thin equipment.
• New seam sealed package available (code “C”)
• Tight tolerance and stability available.
• Suitable for RoHS compliant reflow profile
• High density applications.
• Modems, communication and test equipment.
• PMCIA, Wireless applications
RoHS/RoHS II Compliant
CERAMIC SMD CRYSTAL
Moisture Sensitivity Level – MSL – N/A (The ABM3C Series is a Hermetically Sealed device and not moisture sensitive)
Parameters Minimum Typical Maximum Units Notes
Frequency Range
10.000
50.000
MHz
Fundamental
Operation Mode
Fundamental
Operating Temperature
-10
+70
ºC
See options
Storage Temperature
-40
+90
ºC
Frequency Tolerance @+25°C
-50
+50
ppm
See options
Frequency Stability over the Operating
Temperature ( ref. to +25°C)
-50 +50 ppm See options
Equivalent series resistance (R1)
60
Ω
10.000 – 15.999MHz
50
16.000 – 50.000MHz
Shunt capacitance (C0)
7
pF
Load capacitance (CL) 18 pF
Standard (See options if
other than STD)
Drive Level
10
100
µW
Aging -5 +5 ppm
@25°C±3°C
First year
Insulation Resistance
500
MΩ
@ 100Vdc ± 15V
ABM3C Series products with the Date Code/Traceability Code marking ending in “X” are Glass-Sealed and the following RoHS Exemption applies:
Pb in Glass, exemption 7C-I per RoHS II Directive 2011/65/EU Annex
ABM3C Series products with the Date Code/Traceability Code marking ending in “C” and “F” are Seam-Sealed and are Pb-Free.
ABM3C - MHz - - - -
Frequency in MHz
Please specify the frequency
in MHz.
e.g. 14.31818MHz
Load Capacitance (pF)
Please specify CL in pF
or S for series
Freq. Stability
Y: ± 30 ppm
H: ± 35 ppm
A: ± 80 ppm
Custom ESR if other
than standard
R□
□: Specify a value in Ω
(e.g.: R40)
Freq. Tolerance
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
Operating Temp.
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
OUTLINE DRAWING:
TAPE & REEL:
REFLOW PROFILE:
ABM3C
303 3 2
Esp e r anza, Ra n c ho San t a M a r g a r ita, Calif o r ni a
926 8 8
t e l 949-546-800 0 | fa x 949-546-80 0 1 | w w w .ab r a c on.c o m
Visit
www.abracon.com
for Terms & Conditions of Sale
CERTIFIED
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
Dimensions: inches (mm)
Dimensions: mm
1000pcs/reel
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
5.0 x 3.2 x 1.3mm
CERAMIC SMD CRYSTAL
Revised: 07.31.14
RoHS/RoHS II Compliant
Sealing Method :
Glass Sealing for parts with Traceability Code ending in “X”
Seam Sealing for parts with Traceability Code ending in “C” and “F”