SD09A-E SERIES
MAXIMUM RATINGS
(Tj= 25 unless otherwise noticed)
℃
FEATURES
High pulse current capability, typ=120A/us
Glass passivation insures reliable operation
Max. Dynamic Holding Current -100mA
APPLICATION
High Pressure Sodium Vapor Lighting
Strobes and Flashers
Ignitors
High Voltage Regulators
Pulse Generators
Used to Trigger Gates of SCR's and Triacs
MECHANICAL DATA
Case: JEDEC DO-41 molded plastic
Terminals: Lead Free Plating (Matte Tin Finish)
Component in accordance to RoHs 2002/95/EC
Weight : 0.012 ounces, 0.34 grams
Sidac High Voltage
Sillicon Bidirectional Thyristors
SIDACS
0.9 AMPERES RMS
105 thru 240 VOLTS
SEMICONDUCTOR
LITE-ON
Rating Symbol Value Unit
Peak Repetitive Off– State Voltage (
T
J
= -40 to 125
℃
, Sine Wave, 50 to 60 Hz)
V
DRM
,
V
RRM
± 90
± 180 Volts
On-State RMS Current
(
T
L
= 80
,
℃
Lead Lengh=3/8” , All Conduction Angles) I
T(RMS)
± 0.9 Amp
Peak Non-Repetitive Surge Current
60 Hz One Cycle Sine Wave (Tj = 125
℃
)I
TSM
± 4.0 Amps
Operating Junction Temperature Range
T
J
-40 to +125
℃
Storage Temperature Range Tstg -40 to +150
℃
2
REV. 5, Aug-2007, KDXC01
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not normal operating
conditions) and are not valid simultaneously. If these limits are exceeded, device functional
operation is not implied, damage may occur and reliability may be affected.
SD09A105E, SD09A120E, SD09A130E, SD09A160E,
SD09A220E, SD09A240E
DO-41
A
C
D
A
B
All Dimensions in millimeter
Max.
Min.
DO-41
Dim.
A
D
C
B
25.4
5.20
-
4.10
0.71
2.00 2.70
0.86
RATING AND CHARACTERISTIC CURVES
SD09A-E SERIES
Characteristic Symbol Value Unit
Thermal Resistance - Junction to Lead
Lead Length = 3/8 ” RthJL 40
/
℃
W
Maximum Lead Solder Temperature
(Lead Length 1/16 ” from Case, 10s Max)
≧
T
L
260
℃
Characteristics Symbol Min Typ Max Unit
Peak Reptitive Forward or Reverse Blocking Current
(50 to 60 Hz Sine Wave)
V
DRM
=90V, SD1A105, SD1A120, SD1A130, SD1A160
V
DRM
=180V, SD1A220, SD1A240
I
DRM
---- ----
5 uA
Peak On-State Voltage
(I
TM=
1A Peak @Tp 300 us, Duty Cycle 2%)
≦ ≦
V
TM
---- 1.3 1.5 Volts
Breakover Voltage
IBO= 35uA SD09A105E
35uA SD09A120E
35uA SD09A130E
35uA SD09A160E
35uA SD09A220E
35uA SD09A240E
V
BO
95
110
120
150
210
220
---
---
---
---
---
---
110
130
140
170
230
250
Volts
Dynamic Holding Current
(Sine Wave, 50 to 60 Hz, R
L
=100 Ohm) I
H
---- ---- 100 mA
Switching Resistance
(Sine Wave, 50 to 60 Hz) Rs 0.1 ---- ---- kΩ
Critical Rate of Rise of On-State Current,
Critical Damped Waveform Circuit
(I
PK
= 130 A, Pulse Width = 10 us)
di/dt ---- 120 ---- A/us
THERMAL CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
(T
j
=25 unless otherwise noted)
℃
OFF CHARACTERISTICS
ON CHARACTERISTICS
DYNAMIC CHARACTERISTICS
ORDERING INFORMATION MARKING INFORMATION
SD09AXXXE
NOTE: XXX = Voltage
SD 09A 105 E
SIDAC Series Current: Voltage: Package:
09A=0.9A 105=105V DO-41
120=120V
130=130V
160=160V
220=220V
240=240V
RATING AND CHARACTERISTIC CURVES
SD09A-ESERIES
Specifications mentioned in this publication are subject to change without notice.
◎
