GN DC Series Panel Mount SSRs 3-60, 1-50, 1-100 & 1-200 VDC Current rating 10, 15 and 30 Amps Output voltage 3-60, 1-50, 1-100 and 1-200 VDC Transistor and Mosfet Output Available with or without IP20 touch-safe cover LED Status Indicator UL Approved, CE Compliant to EN60950-1 Improved SEMS screw and washer Screw or Faston Terminals Redesigned housing with anti-rotation barriers DC control Epoxy Free Design IP00 Package, Screw Terminal Previous version click here IP20 Package Screw Terminal Designation Input Output Current Code SSR, Transistor Output 3-32 VDC 3-60 VDC 10 Amp 84 134 750 SSR, Mosfet Output 3.5-32 VDC 1-200 VDC 10 Amp 84 134 850 SSR, Mosfet Output 3.5-32 VDC 1-100 VDC 15 Amp 84 134 860 SSR, Mosfet Output 3.5-32 VDC 1-50 VDC 30 Amp 84 134 870 Output Type 7: Transistor 8: MOSFET Series 8413 4 7 Touch Safe Cover 4: Not Included (IP00) 7: Included (IP20) Required for valid part number For options only and not required for valid part number > Not all part number conbinations are available. Thermal Pad Blank: Not Included H: Included Control Voltage 0: 3.5-32 VDC 5 0 K Rated Voltage & Load Current 5: 3-60 VDC, 10 Amps* 5: 1-200 VDC, 10 Amps** 6: 1-100 VDC,15 Amps** 7: 1-50 VDC, 30 Amps** H Termination Blank: Screws & clamps K: Installed standoffs with screws for PC board mounting (IP00 only) Contact Crouzet Technical Support for information on the availability of a specific part number. * With output type 7 only ** With output type 8 only Output Specification (1)... Description 8413x750 8413x850 8413x860 8413x870 Recommended Operating Voltage [Vdc] 3-48 1-150 1-72 1-36 Absolute Maximun Rating [Vdc] 60 200 100 50 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 1 0.1 0.1 0.5 I GN DC Series I 02 I www.crouzet-ssr.com Output Specifications (1) Description 8413x750 8413x850 8413x860 8413x870 Maximum Load Current [Adc] (2) 10 10 15 30 Minimum Load Current [mA] 10 0.1 0.1 0.1 Maximum Surge Current [Adc] (10msec) 15 50 50 72 Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.4 2.1 0.8 0.8 Maximum On-State Resistance [RDS-ON][Ohms] N/A 0.21 0.05 0.03 Thermal Resistance Junction to Case (Rjc) [C/W] 2 1.25 2.1 1.5 Minimum Heat Sink for Rated Current @ 40C [C/W] 5 1.5 2 2 Maximun Pulse Wide Modulation Frequency [Hz] (3) 1500 2000 2500 1200 Input Specifications (1) Description 8413x750 8413x8xx Control Voltage Range 3-32 VDC 3.5-32 VDC Maximum Reverse Voltage -32 VDC -32 VDC Minimum Turn-On Voltage 3 VDC 3.5 VDC (4) Minimum Turn-Off Voltage 1 VDC 1 VDC Minimum Input Current (for on-state) 9 mA 11 mA Maximum Input Current [mA] 14.5 mA 15 mA Nominal Input Impedance [Ohms] Current Regulated Current Regulated Maximum Turn-On Time [sec] 100 75 Maximum Turn-Off Time [sec] 200 50 General Specifications (1) Description Parameters Dielectric Strength, Input to Output (50/60Hz) 3750 Vrms Dielectric Strength, Input/Output to Ground (50/60Hz) 2500 Vrms Minimum Insulation Resistance (@ 500 VDC) 109 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range (5) -40 +100 C Ambient Storage Temperature Range -40 +100 C Weight (typical) 2.46 oz (70 g) Housing Material UL94 V-0 Baseplate Material Aluminum Input Terminal Screw Torque Range (in-lbs/Nm) 13-15 /1.5-1.7 Load Terminal Screw Torque Range (in-lbs/Nm) 18-20 / 2-2.2 SSR Mounting Screw Torque Range (in-lbs/Nm) 18-20 / 2-2.2 Input/Load Terminal Screw Torque Range (in-lbs/Nm) (6) w/"K" option 8-10 / 0.9-1.13 Humidity 85% non-condensing LED Input Status Indicator Green MTBF (Mean Time Between Failures) at 40C ambient temperature (7) 21,395,130 hours (2,441 years) MTBF (Mean Time Between Failures) at 60C ambient temperature (7) 11,545,504 hours (1,317 years) General Notes 1) All parameters at Tc=25C unless otherwise specified. 2) Heat sinking required, see derating curves. 3) 8VDC Minimum control voltage. Resistive loads only. Consider switching losses; at maximum frequency reduce to 75% output current. 4) Increase minimum voltage by 1V for operations from -20 to -40C. 5) Maximum ambient temperature for 8413x750 is 80C, decrease maximun control voltage 1.35V/C above 80C ambient temperature. 6) Option "K" is intended only for use in attaching a printed circuit board to the SSR or mounting the SSR to a printed circuit board (PCB thicknesses from 0.031 to 0.093 inches [0.79 to 2.36 mm]). 7) All parameters at 50% power rating and 100% duty cycle (contact Crouzet tech support for detailed report). I GN DC Series I 03 I www.crouzet-ssr.com Diagrams Wiring * Inductive loads must be diode suppresed. + V - + Load * * Load + - Recommended Wire Sizes V + Wire Size (Solid / Stranded) Terminals Input Output Wire Pull-Out Strength (lbs)[N] 24 AWG (0.2 mm2) / 0.2 [minimum] 10 [44.5] 2 x 12 AWG (3.3 mm2) / 3.3 [maximum] 90 [400] 20 AWG (0.5 mm2) / 0.518 [minimum] 30 [133] 2 x 10 AWG (5.3 mm ) / 5.3 110 [490] 2 x 8 AWG (8.4 mm2) / 8.4 [maximum] 90 [400] 2 + V - + V 35.5Circuit Block Equivalent Control Circuit -DC Trigger Circuit 4 1 Current Limiter 14 Input Current (mA) 2 Input Current vs Input Voltage Standard Regulated "DC" Inputs +DC OUTPUT 3 INPUT +DC -DC 12 10 8 6 4 2 0 0 5 10 15 20 DC Input Voltage 25 30 35 Dimensions in[mm] Tolerances: 0.02 in / 0.5 mm All dimensions are in: inches [millimeters] Screw Termination 1.1 [27.9] 0.49 [12.4] 1.88 [47.6] 0.89 [22.6] Mounting Hole/Slot 0.19 [4.9] DIA. 0.49 [12.4] 1.7 [43.2] 1.0 [25.4] 1.75 [44.5] Hex Standoff Termination ("K" Option) (6) 1.1 [27.9] 2.25 [57.3] 1.88 [47.6] 1.04 [26.4] Mounting Hole/Slot 0.19 [4.9] DIA. (2 places) 2.25 [57.3] 1.7 [43.2] 1.0 [25.4] 1.75 [44.5] 0.93 [23.6] (4 places) 1.0 [25.4] (2 places) I GN DC Series I 04 I www.crouzet-ssr.com Dimensions in[mm] Screw Termination, IP20 1.1 [27.9] Mounting Hole/Slot 0.19 [4.9] DIA. 0.49 [12.4] 1.88 [47.6] 1.7 [43.2] 2.25 [57.3] 2.32 [58.8] 1.0 [25.4] 1.22 [30.9] Tolerances: 0.02 in / 0.5 mm All dimensions are in: inches [millimeters] 1.75 [44.5] Curves Thermal Derate Information (*) SSR metal base plate acting as heat sink, it must be exposed to free ambient air. 8413x750 5C/W 8413x850 1.5C/W No Heat Sink (*) Load Current (Amps) Load Current (Amps) 8 6 4 2 5C/W 8 6 4 2 0 0 20 30 40 50 60 70 80 20 30 40 Ambient Temperature (C) 50 60 70 80 90 100 Ambient Temperature (C) 8413x870 8413x860 2C/W 3C/W 2C/W 5C/W 15 3C/W 5C/W No Heat Sink (*) 30 Load Current (Amps) Load Current (Amps) 3C/W 10 10 10 5 0 20 30 40 50 60 70 Ambient Temperature (C) 80 90 100 25 20 15 10 5 0 20 30 40 50 60 70 Ambient Temperature (C) 80 90 100 I GN DC Series I 05 I www.crouzet-ssr.com Curves Surge Current Information 8413x750 20 8413x850 70 60 Surge Current (Amp) Surge Current (Amp) 15 10 5 50 40 30 20 10 0 0 0.1 1 10 100 1000 0.1 1 Surge Duration (msec) 100 1000 100 1000 8413x870 8413x860 80 150 Surge Current (Amp) 70 Surge Current (Amp) 10 Surge Duration (msec) 60 50 40 30 20 125 100 75 50 25 10 0 0 0.1 1 10 100 1000 0.1 Surge Duration (msec) Period Duty Factor 10% Duty Factor 20% Duty Factor 50% 10 Surge Duration (msec) For Pulse Wide Modulation applications select the curve according duty factor and pulse duration as following. Duty Factor = Pulse Wide 1 Pulse Wide x100 (%) Period (i) for Single Surge Pulse Tc=40C ;Tj 175C (ii) for Repetitive Surge Pulse Tc=40C ;Tj 130C I GN DC Series I 06 I www.crouzet-ssr.com Agency Approvals EN60950: Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7: E46203 GN DC Series has Environmental Product declarations type III conforming to ISO 14025. Accessories Recommended Accessories New Accessories! Protective Cover & Hardware Kits Protective Cover Part number: KS101 Clear plastic cover compatible with all new S1 designs. Safety covers provide added protection from electric shock when installing or checking equipment. Hardware Kit Part number: HK4 Bag with 2 square brass accessories and 2 screw 8-32 x 5/8 for output. Used to mount TMR1 lug terminals. Cover Hardware Kit Heat Sink Part No. Thermal Resistance Lug Terminal [C/W] Thermal Pad KS101 HK1 HS501DR 5.0 TRM1 HSP-1 HK4 HS301 / HS301DR 3.0 TRM6 HSP-2 HS251 2.5 HS201 / HS201DR 2.0 HS202 / HS202DR 2.0 HS172 1.7 HS151 / HS151DR 1.5 HS122 / HS122DR 1.2 HS103 / HS103DR 1.0 HS101 1.0 HS073 0.7 HS072 0.7 HS053 0.5 HS033 0.36 HS023 0.25 Rev. 021315 I GN DC Series I 07 I www.crouzet-ssr.com DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH. * Disconnect all power before installing or working with this equipment. * Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION. * Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo. * Verificar todas las conexiones y colocar todas las tapas antes de energizer el equipo. El incumplimiento de estas instrucciones puede provocar la muerte o lesiones serias. RISQUE DE DESCHARGE ELECTRIQUE OU EXPLOSION * Eteindre toutes les sources d'energie de cet appareil avant de travailler dessus de cet appareil * Verifier tous connections, et remettre tous couverts en olace avant de mettre sous De non-suivi de ces instructions provoquera la mort ou des lesions serieuses serieuses. GEFAHR EINES ELEKTRISCHE N SCHLAGES ODER EINER EXPLOSION. * Stellen Sie jeglichen Strom ab, der dieses Gerat versorgt, bevor Sie an dem Gerat Arbeiten durchfuhren * Vor dem Drehen auf Energie alle Anschlusse uberprufen und alle Abdeckungen ersetzen. Unterlassung dieser Anweisungen konnen zum Tode oder zu schweren Verletzungen fuhren. RISCHIO DI SCOSSA ELETTRICA O DELL'ESPLOSI ONE. * Spenga tutta l'alimentazion e che fornisce questa apparecchiatu ra prima del lavorare a questa apparecchiatu ra * * Verificare tutti i collegamenti e sostituire tutte le coperture prima della rotazione sull'alimentazi one L'omissione di seguire queste istruz ioni provochera la morte o di lesioni serie WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE RISQUE DE DOMMAGE MATERIEL ET DE SURCHAUFFE DU BOITIER GEFAHR VON MATERIALSCHADEN UND GEHAUSEERHITZUNG * The product's side panels may be hot, allow the product to cool before touching. * Follow proper mounting instructions including torque values. * Do not allow liquids or foreign objects to enter this product. * Les panneaux lateraux du produit peuvent etre chauds. Laisser le produit refroidir avant de le toucher. * Respecter les consignes de montage, et notamment les couples de serrage. * Ne pas laisser penetrer de liquide ni de corps etrangers a l'interieur du produit. * Die Seitenwande konnen hei sein. Lassen Sie das Produkt abkuhlen, bevor Sie es beruhren. * Beachten Sie die Montageanweisungen, * Fuhren Sie keine Flussigkeiten oder Fremdkorper in das Produkt ein. Le non-respect de cette directive peut entrainer, Failure to follow these instructions can result in des lesions corporelles graves ou des serious injury, or equipment damage. dommages materiels. Die Nichtbeachtung dieser Anweisung kann Korperverletzung oder Materialschaden zur Folge haben. RIESGO DE DANOS MATERIALES Y DE SOBRECALENTAMIENTO DE LA UNIDAD RISCHIO DI DANNI MATERIALI E D'INVOLUCRO CALDO * Los paneles laterales del producto pueden estar calientes. Esperar que el producto se enfrie antes de tocarlo. * Respetar las instrucciones de montaje, y en particular los pares de apretado. * No dejar que penetren liquidos o cuerpos extranos en el producto. * I pannelli laterali dell'apparecchio possono scottare; lasciar quindi raffreddare il prodotto prima di toccarlo. * Seguire le istruzioni di montaggio corrette. * Non far entrare liquidi o oggetti estranei in questo apparecchio. Si no se respetan estas precauciones pueden producirse graves lesiones, danos materiales. La mancata osservanza di questa precauzione puo causare gravi rischi per l'incolumita personale o danni alle apparecchiature. * * * I GN DC Series I 08 I www.crouzet-ssr.com ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People's Republic of China Electronic Industry Standard SJ/T11364 - 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Name Toxic or hazardous Substance and Elements Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent Chromium (Cr (VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers (PBDE) Semiconductor die Solder - SJ/T11364 - 2006, (Pb) (Hg) (Cd) (Cr (VI)) 50 (PBB) (PBDE) Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Crouzet: 84134750 84134850 84134860 84134870 84137750 84137850 84137860 84137870