IGN DC Series I02 I www.crouzet-ssr.com
Output Specifications (1)
Description 8413x750
Maximum Load Current [Adc] (2) 10
Minimum Load Current [mA] 10
Maximum Surge Current [Adc] (10msec) 15
Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.4
Thermal Resistance Junction to Case (Rjc) [°C/W] 2
Minimum Heat Sink for Rated Current @ 40°C [°C/W] 5
Maximun Pulse Wide Modulation Frequency [Hz] (3) 1500
8413x860
15
0.1
50
0.8
Maximum On-State Resistance [RDS-ON][Ohms] N/A
8413x850
10
0.1
50
2.1
1.25
1.5
2000
0.21
8413x870
30
0.1
72
0.8
1.5
2
1200
0.030.05
2.1
2
2500
Input Specifications (1)
Description 8413x750
Control Voltage Range 3-32 VDC
Maximum Reverse Voltage -32 VDC
Minimum Turn-On Voltage 3 VDC
Minimum Turn-Off Voltage 1 VDC
Minimum Input Current (for on-state) 9 mA
Maximum Input Current [mA] 14.5 mA
Nominal Input Impedance [Ohms] Current Regulated
Maximum Turn-On Time [µsec] 100
Maximum Turn-Off Time [µsec] 200
8413x8xx
3.5-32 VDC
-32 VDC
3.5 VDC (4)
1 VDC
11 mA
15 mA
Current Regulated
75
50
General Specifications (1)
Description Parameters
Dielectric Strength, Input to Output (50/60Hz) 3750 Vrms
Dielectric Strength, Input/Output to Ground (50/60Hz) 2500 Vrms
Minimum Insulation Resistance (@ 500 VDC) 109 Ohms
Maximum Capacitance, Input/Output 8 pF
Ambient Operating Temperature Range (5)
Ambient Storage Temperature Range
Weight (typical) 2.46 oz (70 g)
Housing Material UL94 V-0
Baseplate Material Aluminum
Input Terminal Screw Torque Range (in-lbs/Nm) 13-15 /1.5-1.7
Load Terminal Screw Torque Range (in-lbs/Nm) 18-20 / 2-2.2
SSR Mounting Screw Torque Range (in-lbs/Nm) 18-20 / 2-2.2
Input/Load Terminal Screw Torque Range (in-lbs/Nm) (6) w/”K” option 8-10 / 0.9-1.13
Humidity 85% non-condensing
LED Input Status Indicator Green
MTBF (Mean Time Between Failures) at 40°C ambient temperature (7) 21,395,130 hours (2,441 years)
MTBF (Mean Time Between Failures) at 60°C ambient temperature (7) 11,545,504 hours (1,317 years)
-40 +100 °C
-40 +100 °C
General Notes
1) All parameters at Tc=25°C unless otherwise specified.
2) Heat sinking required, see derating curves.
3) 8VDC Minimum control voltage. Resistive loads only. Consider switching losses; at maximum frequency reduce to 75% output current.
4) Increase minimum voltage by 1V for operations from -20 to -40°C.
5) Maximum ambient temperature for 8413x750 is 80°C, decrease maximun control voltage 1.35V/°C above 80°C ambient temperature.
6) Option "K" is intended only for use in attaching a printed circuit board to the SSR or mounting the SSR to a printed
circuit board (PCB thicknesses from 0.031 to 0.093 inches [0.79 to 2.36 mm]).
7) All parameters at 50% power rating and 100% duty cycle (contact Crouzet tech support for detailed report).