F-219 TIGER TM EYE IDC TCSD (2.00 mm) .0787" TMM .26" (6.6 mm) TCSD-08-D-02.00-01-N-R TCSD SERIES TIGER EYE IDC SOCKET CABLE TM Mates with: TMM, TMMH, STMM, MMT, TW, MTMM, EHT, ETMM (-SR), ZSTMM TYPE STRIP END OPTION NO. PINS PER ROW 01 LENGTH PLATING OPTION OTHER OPTION N SPECIFICATIONS For complete specifications see www.samtec.com?TCSD -04, -05, -06, -07, -08, -10, -12, -13, -15, -17, -20, -22, -25 Insulator Material: Black Glass Filled Polyester Contact: BeCu Plating: Au or Sn over 50 " (1.27 m) Ni Wire: 28 AWG 7/36 Stranded, Tinned, Copper with Gray PVC Insulator Current Rating (TCSD/STMM): 2.8 A per pin (2 pins powered) Operating Temp Range: -40 C to +105 C Lead Size Accepted: (0.48 mm) .019" to (0.53 mm) .021" Insertion Depth: (2.87 mm) .113" to (3.17 mm) .125" RoHS Compliant: Yes -N -"XX.XX" = Notch Polarization = Assembled Length Assembled Length in INCHES (1/8") 2 inches minimum -F = Gold flash on contact Leave blank for standard plating: 30 " (0.76 m) Gold on contact area (Standard sizes) -S -D = Single End = Double End -P "XX" = Position Polarization No. of positions x (2.00) .0787 + (7.874) .3100 01 RECOGNITIONS 02 TCSD For complete scope of recognitions see www.samtec.com/quality Specify "XX" as position number. Same position will be polarized on both ends. = Socket Strip (1.02) .040 (3.17) .125 FILE NO. E111594 Not available with -O, -M, -R, -DXX or -BXX -D "XX" 1 -B "XX" 01 (MOQ Required) Specify PK-01-07 for polarizing key (Available in wheels of six each). Also polarizes SMM Series socket strips. Double Row Connectors Outer Most (End of assembly) 4 (5.08) .200 "XX" (2.00) .0787 EJECTOR HEADERS & LOCKING CLIPS -R = Reversed 5"max. 2"min. Breakout starts with Number 1 lead indicated by brown wire or red stripe. Shown on top side. 5 2 -RW -M = Middle Reverse = Reverse Wiring See TMM Series. Requires -DXX * Ejector headers * Locking clips * Strain relief option Note: TCSD Series assemblies are non-standard, non-returnable. 1/8" 4" minimum (2.00) .0787 POLARIZING KEY "XX" Specify "XX" as number of conductors to be broken out. No. of positions x (2.00) .0787 + (4.00) .157 (1.00) .039 * Other sizes * Other platings = Daisy Chain 2" min. = Breakout (4.00) .158 ALSO AVAILABLE -SR = Strain Relief See EHT Series. = Outside Reverse 02 Blue or black wire opposite position #1. 3 Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM 5 -O 01 All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. Requires -DXX 5