Bahco Group - Product Card Hand file Industry pack, with handle, 1-100...-3 Use For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in highalloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Shape Edges and surfaces parallel. Surfaces double cut, one edge uncut, one edge single cut. Type of cut: 1 = Bastard, 2 = Second, 3 = Smooth. A B C mm mm mm 1-100-06-1-3 8202538 6 150 16 4.0 13 1 110 1-100-06-2-3 8202545 6 150 16 4.0 18 2 110 1-100-06-3-3 8202552 6 150 16 4.0 22 3 110 1-100-08-1-3 8202569 6 200 20 5.0 10 1 200 1-100-08-2-3 8202576 6 200 20 5.0 14 2 200 1-100-08-3-3 8202583 6 200 20 5.0 18 3 200 1-100-10-1-3 8202590 6 250 25 5.5 9 1 310 1-100-10-2-3 8202613 6 250 25 5.5 12 2 310 1-100-10-3-3 8202644 6 250 25 5.5 16 3 310 1-100-12-1-3 8202668 6 300 30 6.0 8 1 431 1-100-12-2-3 8202682 6 300 30 6.0 11 2 431 8202712 6 300 30 6.0 14 3 431 1-100-12-3-3 http://extranet.bahco.com/catalogue/ProdCard.asp?showOnlyOne=true&this_might_p... 23/09/2003