SENSOR SOLUTIONS ///MSP300
Page 1
09/2017
FEATURES
APPLICATIONS
One Piece Stainless Steel
Construction
Ranges up to 15kpsi
Digital Pressure and Temperature
Output or Analog mV/Amplified
Output
±1 %Span Accuracy
UL Certification (analog only)
Pumps and Compressors
Hydraulic/Pneumatic Systems
Automotive Test Systems
Energy and Water Management
Medical Gas Pressure
Leak Detection
Remote Measuring Systems
General Pressure Measurements
MSP300
Pressure Transducer
SPECIFICATIONS
Analog Output or 14-Bit Digital Pressure with 11-Bit
Temperature Output
One Piece Stainless Steel Construction
Low Cost
17-4PH or 316L Stainless Steel
Customizable
The MSP300 pressure transducer from the Microfused line of TE
is suitable for measurement of liquid or gas pressure, even for
difficult media such as contaminated water, steam, and mildly
corrosive fluids.
The transducer pressure cavity is machined from a solid piece of
17-4PH or 316L stainless steel. The standard version includes a
1/4 NPT pipe thread allowing a leak-proof, all metal sealed system.
With excellent durability, there are no O-rings, welds or organics
exposed to the pressure media.
TE’s proprietary Microfused technology, derived from demanding
aerospace applications, employs micromachined silicon
piezoresistive strain gages fused with high temperature glass to a
stainless steel diaphragm. This approach achieves media
compatibility simply and elegantly while providing an exceptionally
stable sensor without the PN junctions of conventional
micromachined sensors.
This product is geared towards industrial and commercial OEMs
for small to high volume applications. Standard configurations are
suitable for many applications. Please contact factory for your
customization needs.
MSP300
Pressure Transducer
SENSOR SOLUTIONS ///MSP300
11/2017
Page 2
STANDARD RANGES
Range (psi)
Range (Bar)
Gage/Compound
0 to 100
0 to 007
0 to 200
0 to 010
0 to 300
0 to 020
0 to 500
0 to 035
0 to 01k
0 to 070
0 to 03k
0 to 200
0 to 05k
0 to 350
0 to 10k
0 to 700
0 to 15k
0 to 01k
ALL INTERMEDIATE RANGES ARE STANDARD
PERFORMANCE SPECIFICATIONS (ANALOG)
Supply Voltage: 5.0V, Ambient Temperature: 25°C (unless otherwise specified)
MIN
TYP
MAX
UNITS
NOTES
-1
1
%Span
BFSL @ 25°C
1.00E+6
0~F.S. Cycles
2X
Rated
5X
Rated
50
MΩ
@ 250VDC
-0.25
0.25
%Span
-2.0
2.0
%Span
Over comp. temp
-2.0
2.0
%Span
Over comp. temp
-3.0
3.0
%Span
@ 25°C
-2.0
2.0
%Span
@ 25°C
-2.0
2.0
%Span
@ 25°C
0
55
°C
-20
+85
°C
-40
+85
°C
1
MΩ
5
KΩ
1
ms
DC to 1KHz (typical)
50g, 11 msec Half Sine Shock per MIL-STD-202G, Method 213B, Condition A
±20g, MIL-STD-810C, Procedure 514.2-2, Curve L
17-4PH or 316L Stainless Steel
For custom configurations, consult factory.
MSP300
Pressure Transducer
SENSOR SOLUTIONS ///MSP300
11/2017
Page 3
PERFORMANCE SPECIFICATIONS (DIGITAL)
Supply Voltage: 3.3V, Ambient Temperature: 25°C (unless otherwise specified)
MIN
TYP
MAX
UNITS
NOTES
2.7
5.0
VDC
720
1000
1280
Count
14720
15000
15280
Count
3.5
mA
2X
Rated
5X
Rated
50
MΩ
@ 250VDC
1.00E+6
0~F.S. Cycles
-1
1
%Span
BFSL @ 25°C
-3
3
°C
1
-2.0
2.0
%Span
Over comp. temp
-2.0
2.0
%Span
Over comp. temp
-0.25
0.25
%Span
@ 25°C
0
55
°C
512
1075
Count
3
ms @ 4MHz
Non-sleep mode, 2
8.4
ms @ 4MHz
Sleep mode, 2
-20
+85
°C
-40
+85
°C
50g, 11 msec Half Sine Shock per MIL-STD-202G, Method 213B, Condition A
±20g, MIL-STD-810C, Procedure 514.2-2, Curve L
17-4PH or 316L Stainless Steel
For custom configurations, consult factory.
Notes
1. Reflect pressure port diaphragm temperature over the compensated temperature range.
2. Response time is from power on to reading measurement data.
3. Maximum cable length for I2C output is 10meter and 2.5meter for SPI output.
MSP300
Pressure Transducer
SENSOR SOLUTIONS ///MSP300
11/2017
Page 4
DIMENSIONS
OUTPUT (ANALOG)
Code
Output
Supply
Ratiometricity
Red
Black
Green
White
1
0 – 50mV
5V
Yes
+Supply
-Supply
+Output
-Output
2
0 – 100mV
5V
Yes
+Supply
-Supply
+Output
-Output
3
0.5 – 4.5V
5 ± 0.25V
Yes
+Supply
Common
Cut Off
+Output
4
1 – 5V
10 – 30V
No
+Supply
Common
Cut Off
+Output
5
4 – 20mA
9 – 30V
No
+Supply
-Supply
Cut Off
Cut Off
OUTPUT (DIGITAL)
Code
Output
Supply
Red
Black
Green
White
Yellow
J
I2C
2.7 – 5.0V
+Supply
-Supply
SCL
SDA
--
S
SPI
2.7 – 5.0V
+Supply
-Supply
SCLK
MISO
SS
CODE
PORT
DIM C
2
1/4-19 BSPP
0.453[11.50]
4
7/16-20 UNF-A MALE SAE
J514 STRAIGHT THREAD O-
RING BUNA-N 70SH-904,
ID8.92mm x W1.83mm
0.435[11.05]
5
1/4-18 NPT
0.596[15.14]
6
1/8-27 NPT
0.475[12.06]
E
1/4-19 BSPT
0.50[12.70]
F
1/4-19 BSPP FEMALE
0.70[17.78]
K
1/8-27 NPT FEMALE
0.70[17.78]
P
7/16-20 UNF-2A FEMALE SAE
J514 STRAIGHT THREAD
WITH INTEGRAL VALVE
DEPRESSOR
0.689[17.50]
Q
M10 x 1.0 mm
0.42[10.67]
S
M12 x 1.5 mm
0.53[13.46]
U
G/14 DIN 3852 FORM E
GASKET DIN3869-14 NBR
0.547[13.90]
W
M20 x 1.5 mm
0.702[17.83]
CODE
CONNECTION TYPE
1
CABLE 2 FT
2
CABLE 4 FT
3
CABLE 10 FT
M
CABLE 1 M
N
CABLE 2 M
P
CABLE 5 M
R
CABLE 10 M
MSP300
Pressure Transducer
SENSOR SOLUTIONS ///MSP300
11/2017
Page 5
PRESSURE OUTPUT
MSP300
Pressure Transducer
SENSOR SOLUTIONS ///MSP300
11/2017
Page 6
TEMPERATURE OUTPUT
MSP300
Pressure Transducer
SENSOR SOLUTIONS ///MSP300
11/2017
Page 7
ORDERING INFORMATION
M30 3 3 – 1 0 0 0 0 K – 350B G
Output
Code
Output Signal
Supply Voltage
1
0-50mV
5V
2
0-100mV
5V
3
0.5-4.5V
5±0.25V
4
1-5V
10-30V
5
4-20mA
9-30V
J*
I2C
2.7-5.0V
S*
SPI
2.7-5.0V
Pressure Reference
G
Gauge
C
Compound
Pressure Ranges
Psi
Std
Bar
Std
100P
007B
200P
010B
300P
020B
500P
035B
01KP
070B
03KP
200B
05KP
350B
10KP
700B
15KP
01KB
Cable Length
1
2 feet
2
4 feet
3
10 feet
M
1 meter
N
2 meter
P
5 meter
R
10 meter
Pressure Port
Code
Port Type
Dim C
2
1/4-19 BSPP
0.453[11.50]
4
7/16-20 UNF-2A Male SAE J514
Straight Thread O-Ring Boss O-Ring
BUNA-N 70SH-904
ID8.92mm X W1.83mm
0.435[11.05]
5
1/4-18 NPT
0.596[15.14]
6
1/8-27 NPT
0.475[12.06]
E
1/4-19 BSPT
0.50[12.70]
F
1/4-19 BSPP Female
0.70[17.78]
K
1/8-27 NPT Female
0.70[17.78]
P
7/16-20 UNF-2A Female SAE J514
Straight Thread w/ Integral Valve
Depressor
0.689[17.50]
Q
M10x1.0mm
0.420[10.67]
S
M12x1.5mm
0.53[13.90]
U
G1/4 DIN 3852 Form E Gasket
DIN3869-14 NBR
0.547[13.90]
W
M20 x 1.5mm
0.702[17.83]
Port Material
0
17-4PH Stainless Steel
1
316L Stainless Steel
Cleaning
0
No Selection
1
Oxygen Clean B40.1, Level IV
Sleep (Digital Only)
0
Non-sleep Mode
1
Sleep Mode
Code Address for I2C (Digital Only)
0
0X28H
1
0x36H
2
0x46H
3
0x48H
4
0x51H
TE.com/sensorsolutions
Measurement Specialties, Inc., a TE Connectivity company.
Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein
might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes
no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard
Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse
of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application.
© 2015 TE Connectivity Ltd. family of companies All Rights Reserved.
NORTH AMERICA
Measurement Specialties, Inc.,
a TE Connectivity Company
Phone: 800-522-6752
Email: customercare.frmt@te.com
EUROPE
Measurement Specialties (Europe), Ltd.,
a TE Connectivity Company
Phone: +31 73 624 6999
Email: customercare.lcsb@te.com
ASIA
Measurement Specialties (China), Ltd.,
a TE Connectivity Company
Phone: 0400-820-6015
Email: customercare.shzn@te.com
All Intermediate Ranges are Standard
*Digital Options
SPI Default Code ‘0’