© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 7/10/2012 1
One world. One KEMET
Benets
• Approvals: ENEC, UL
• Rated voltage: 630 VDC, 250 VAC 50/60 Hz
• Capacitance range: 0.047 – 0.47 µF
• Capacitance tolerance: ±20%
• Resistance range: 22 – 470 Ω
• Resistance tolerance: ±30%
• Lead spacing: 15.2 – 25.4 mm
• Climatic category: 40/085/56/B, IEC 60068–1
• Tape and reel packaging in accordance with IEC 60286–2
• RoHS Compliant and lead-free terminations
• Operating temperature range of -40˚C to +85˚C
• Excellent self-healing properties
which ensure long life even
when subjected to frequent over
voltages
• Good resistance to ionization due
to impregnated paper dielectric
• High dV/dt capability
• Impregnated paper ensures
excellent stability and reliability
properties, particularly in
applications with continuous
operation
Overview
The PMR209 Series is constructed of multilayer metallized paper
encapsulated and impregnated in self-extinguishing material
meeting the requirements of UL 94 V–0.
Applications
Typical applications include worldwide use in contact protection,
contact interference suppression and transient suppression.
AC Line EMI Suppression and RC Networks
PMR209 Series Metallized Impregnated Paper, Class X2,
250 VAC/630 VDC
Legacy Part Number System
PMR209 M B 5470 M047 R30
Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pF) Capacitance
Tolerance Resistance (Ω) Lead and
Packaging Code
RC Snubber,
Metallized Paper
M = 250 B = 15.2
C = 20.3
E = 25.4
Digits 2 – 4 (3) indicates
the rst three digits of the
capacitance value. First digit
indicates the total number of
digits in the capacitance value.
M = ±20% Resistance Value
in Ω
See Ordering
Options Table
New KEMET Part Number System
P409 Q M 473 M250 AH470
Capacitor
Class Series Lead Spacing
(mm) Size Code Capacitance Code (pF) Capacitance
Tolerance Rated Voltage
(VAC)
Lead and
Packaging Code Resistance (Ω)
P=
Metallized
Paper
RC Snubber Q = 15.2
C = 20.3
E = 25.4
See
Dimension
Table
First two digits represent
signicant gures. Third
digit species number of
zeros.
M = ±20% 250 = 250 See Ordering
Options Table
H + rst two digits
representing
signicant gures.
Third digit species
number of zeros.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 7/10/2012 2
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC/630 VDC
Ordering Options Table
Lead
Spacing
Nominal
(mm)
Type of Leads and Packaging Lead Length
(mm)
KEMET
Lead and
Packaging
Code
Legacy
Lead and
Packaging
Code
15.2
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads 6 +0/-1 CR06
Bulk (Bag) – Max Length Leads 30 +5/-0 A R30
Tape & Reel (Standard Reel) H
0
= 18.5 +/-0.5 L R19T0
Other Lead and Packaging Options
Tape & Reel (Large Reel) H
0
= 18.5 +/-0.5 P R19T1
20.3
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads 6 +0/-1 CR06
Bulk (Bag) – Max Length Leads 30 +5/-0 A R30
Tape & Reel (Standard Reel) H
0
= 18.5 +/-0.5 L R19T0
Other Lead and Packaging Options
Tape & Reel (Large Reel) H
0
= 18.5 +/-0.5 P R19T1
25.4 Standard Lead and Packaging Options
Bulk (Bag) – Short Leads 6 +0/-1 CR06
Bulk (Tray) – Max Length Leads 30 +5/-0 A R30
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 7/10/2012 3
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC/630 VDC
L
H
LL
d
B
p
R
C
Series Connection
Dimensions – Millimeters
Size Code p B H L d
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
QM 15.2 +/-0.4 7.3 Maximum 13 Maximum 18.5 Maximum 0.8 +/-0.05
CE 20.3 +/-0.4 7.6 Maximum 14 Maximum 24 Maximum 0.8 +/-0.05
CP 20.3 +/-0.4 11.3 Maximum 16.5 Maximum 24 Maximum 0.8 +/-0.05
EJ 25.4 +/-0.4 12.1 Maximum 19 Maximum 30.5 Maximum 1.0 +/-0.05
EL 25.4 +/-0.4 15.3 Maximum 22 Maximum 30.5 Maximum 1.0 +/-0.05
Note: See Ordering Options Table for lead length (LL) options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 7/10/2012 4
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC/630 VDC
Performance Characteristics
Rated Voltage 250 VAC 50/60 Hz
Capacitance Range 0.047 – 0.47 µF
Capacitance Tolerance ±20%
Resistance Range 22 – 470 Ω
Resistance Tolerance ±30%
Temperature Range -40°C to +85°C
Climatic Category 40/085/56/B
Approvals ENEC, UL
Peak Pulse Voltage 1,000 V
Series Resistance
The series resistance is dened at 1 kHz for RC ≥ 50 µs and at 100 kHz
for RC < 50 µs
Insulation Resistance
Minimum Values Between Terminals
C ≤ 0.33 µF ≥ 3,000 MΩ
C > 0.33 µF ≥ 1,000 MΩ • µF
Pulse Current Maximum 12 A repetitive. Maximum 20 A peak for occasional transients.
Test Voltage Between Terminals
The 100% screening factory test is carried out at 1,800 VDC. The voltage
level is selected to meet the requirements in applicable equipment
standards. All electrical characteristics are checked after the test.
In DC Applications Recommended voltage ≤ 630 VDC
Power Ratings
The average losses may reach 0.5 W provided the surface temperature
does not exceed + 85°C. For maximum permitted power dissipation vs.
temperature, see Derating Curves.
Derating Curves
Maximum Allowable Power Dissipation vs. Ambient Temperature and
Case Sizes.
ºC
Curve Dimension B (mm)
17.3
27.6
311.3
415.3
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 7/10/2012 5
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC/630 VDC
Environmental Test Data
Test IEC Publication Procedure
Vibration IEC 60068–2–6 Test Fc
3 directions at 2 hours each
10 – 500 Hz at 0.75 mm or 98 m/s
2
Bump IEC 60068–2–29 Test Eb 4,000 bumps at 390 m/s2
Solderability IEC 60068–2–20 Test Ta Wetting time for d > 0.8 < 1.5 seconds
Damp Heat Steady State IEC 60068–2–78 Test Cab +40°C and 93% RH, 56 days
Active Flammability IEC 60384–14 VR + 20 surge pulses at 2.5 kV (pulse every 5 seconds)
Passive Flammability IEC 60384–14 IEC 60384–1, IEC 60695–11–5 Needle-ame test
Damp Heat Steady State IEC 60068–2–78 Test Cab +40°C and 93% RH, 56 days
Approvals
Certication Body Specication File Number
EN/IEC 60384–14 SE/0140–28A
UL 1283 E100117
Environmental Compliance
All KEMET EMI capacitors are RoHS Compliant.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 7/10/2012 6
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC/630 VDC
Table 1 – Ratings & Part Number Reference
Lead
Spacing (p)
Cap Value
(µF)
Resistance
(Ω)
Maximum Dimensions in mm New KEMET
Part Number Legacy Part Number
B H L
15.2 0.047 47 7.3 13 18.5 P409QM473M250(1)H470 PMR209MB5470M047(1)
15.2 0.047 100 7. 3 13 18.5 P409QM473M250(1)H101 PMR209MB5470M100(1)
20.3 0.1 22 7.6 14 24 P409CE104M250(1)H220 PMR209MC6100M022(1)
20.3 0.1 33 7.6 14 24 P409CE104M250(1)H330 PMR209MC6100M033(1)
20.3 0.1 47 7.6 14 24 P409CE104M250(1)H470 PMR209MC6100M047(1)
20.3 0.1 68 7.6 14 24 P409CE104M250(1)H680 PMR209MC6100M068(1)
20.3 0.1 100 7.6 14 24 P409CE104M250(1)H101 PMR209MC6100M100(1)
20.3 0.1 150 11.3 16.5 24 P409CP104M250(1)H151 PMR209MC6100M150(1)
20.3 0.1 220 11.3 16.5 24 P409CP104M250(1)H221 PMR209MC6100M220(1)
20.3 0.1 330 11.3 16.5 24 P409CP104M250(1)H331 PMR209MC6100M330(1)
20.3 0.1 470 11.3 16.5 24 P409CP104M250(1)H471 PMR209MC6100M470(1)
20.3 0.22 22 11.3 16.5 24 P409CP224M250(1)H220 PMR209MC6220M022(1)
20.3 0.22 33 11.3 16.5 24 P409CP224M250(1)H330 PMR209MC6220M033(1)
20.3 0.22 47 11.3 16.5 24 P409CP224M250(1)H470 PMR209MC6220M047(1)
20.3 0.22 68 11.3 16.5 24 P409CP224M250(1)H680 PMR209MC6220M068(1)
20.3 0.22 100 11.3 16.5 24 P409CP224M250(1)H101 PMR209MC6220M100(1)
20.3 0.22 150 11.3 16.5 24 P409CP224M250(1)H151 PMR209MC6220M150(1)
20.3 0.22 220 11.3 16.5 24 P409CP224M250(1)H221 PMR209MC6220M220(1)
25.4 0.22 330 12.1 19 30.5 P409EJ224M250(1)H331 PMR209ME6220M330(1)
25.4 0.22 470 15.3 22 30.5 P409EL224M250(1)H471 PMR209ME6220M470(1)
25.4 0.47 33 15.3 22 30.5 P409EL474M250(1)H330 PMR209ME6470M033(1)
25.4 0.47 47 15.3 22 30.5 P409EL474M250(1)H470 PMR209ME6470M047(1)
25.4 0.47 68 15.3 22 30.5 P409EL474M250(1)H680 PMR209ME6470M068(1)
25.4 0.47 100 15.3 22 30.5 P409EL474M250(1)H101 PMR209ME6470M100(1)
25.4 0.47 150 15.3 22 30.5 P409EL474M250(1)H151 PMR209ME6470M150(1)
25.4 0.47 220 15.3 22 30.5 P409EL474M250(1)H221 PMR209ME6470M220(1)
Lead Spacing
(p) Cap Value (µF) Resistance Ω B (mm) H (mm) L (mm) New KEMET
Part Number Legacy Part Number
(1) Insert lead and packaging code. See Ordering Options Table for available options.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 7/10/2012 7
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC/630 VDC
Soldering Process
The implementation of the RoHS Directive has required the use
of SnAuCu (SAC) or SnCu alloys as primary solder. These alloys
require a higher liquidus temperature (217ºC – 221ºC) as compared
to SnPb eutectic alloy (183ºC). Due to the higher pre-heat and
wave temperatures, the heat stress to components has increased
considerably. Polypropylene capacitors are especially sensitive
to soldering temperature due to the relatively low melting point of
polypropylene material (160ºC – 170ºC). As a result, wave soldering
can be destructive, especially to mechanically small polypropylene
capacitors with lead spacings of 5 –10 mm. For more information,
please refer to KEMET's Recommended Soldering Proles or contact
a KEMET representative. IEC Publication 61760–1 Edition 2 may
also be consulted for general guidelines.
Marking
• KEMET’s logo
• Series
• RC unit
• Capacitance
• Rated resistance
• Rated voltage
• IEC climatic category
• Circuit diagram
• Passive ammability class
• Manufacturing date code
Packaging Quantities
Size
Code
Lead
Spacing
(mm)
Thickness
(mm)
Height
(mm)
Length
(mm)
Bulk
Short
Leads
Bulk
Long
Leads
Standard
Reel
ø 360 mm
QM
15.2
7.3
13
18.5
500
100
600
CE 20.3 7.6 14 24 250 1500 250
CP 20.3 11.3 16.5 24 150 1000 180
EJ 25.4 12.1 19 30.5 100 800
EL 25.4 15.3 22 30.5 75 600
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 7/10/2012 8
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC/630 VDC
Lead Taping & Packaging (IEC 60286–2)
Taping Speci cation
Dimensions in mm Standard IEC 60286–2
Lead spacing +6/-0.1 F
Formed
7.5
10.2 15.2 20.3 22.5 F
Carrier tape width +/-0.5 W 18 18 18 18 18 18+1/-0.5
Hold-down tape width +/-0.3 W
0
912 12 12 12
Position of sprocket hole +/-0.5 W199999 9+0.75/-0.5
Distance between tapes Maximum W233333 3
Sprocket hole diameter +/-0.2 D044444 4
Feed hole lead spacing +/-0.3 P0
(1) 12.7(4) 12.7 12.7 12.7 12.7 12.7
Distance lead – feed hole +/-0.7 P
1
3.75 7.6 5.1 8.9 5.3 P1
Deviation tape – plane Maximum ∆p 1.3 1.3 1.3 1.3 1.3 1.3
Lateral deviation Maximum ∆h 22222 2
Total thickness +/-0.2 t0.7 0.7 0.7 0.7 0.9MAX 0.9MAX
Sprocket hole/cap body Nominal H
0
(2) 18+2/-0 18+2/-0 18+2/-0 18+2/-0 18.5+/-0.5 18+2/-0
Sprocket hole/top of cap body Maximum H1
(3) 35 35 35 35 58 58MAX
(1) Maximum cumulative feed hole error, 1 mm per 20 parts.
(2) 16.5 mm available on request. (3) Depending on case size.
(4) 15 mm available on request.
Lead Spacing 10.2 – 15.2 mm
Lead Spacing 20.3 – 22.5 mm
Formed Leads from 10.2 to 7.5 mm
0
0
0
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 7/10/2012 9
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC/630 VDC
H
T
W
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Speci cations
Series Dimensions (mm)
H W T
R4x, R4x+R, R7x, RSB
360 340 59F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx 330 330 50
Reel Speci cations
Series Dimensions (mm)
DH W
R4x, R4x+R, R7x, RSB 355
500
30
25 55 (Max)F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
360
500
30 46 (Max)
Manufacturing Date Code (IEC–60062)
Y = Year, Z = Month
Year Code Month Code
2000 MJanuary 1
2001 NFebruary 2
2002
P
March
3
2003
R
April
4
2004
S
May
5
2005
T
June
6
2006
U
July
7
2007
V
August
8
2008 WSeptember 9
2009 XOctober O
2010
A
November
N
2011
B
December
D
2012
C
2013
D
2014
E
2015
F
2016
H
2017 J
2018
K
2019
L
2020
M
D
W
H
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 7/10/2012 10
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC/630 VDC
KEMET Corporation
World Headquarters
2835 KEMET Way
Simpsonville, SC 29681
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Corporate Of ces
Fort Lauderdale, FL
Tel: 954-766-2800
North America
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
West Chester, PA
Tel: 610-692-4642
Central
Novi, MI
Tel: 248-994-1030
Carmel, IN
Tel: 317-706-6742
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Zapopan, Jalisco
Tel: 52-33-3123-2141
Europe
Southern Europe
Geneva, Switzerland
Tel: 41-22-715-0100
Paris, France
Tel: 33-1-4646-1009
Sasso Marconi, Italy
Tel: 39- 051-939111
Milan, Italy
Tel: 39-02-57518176
Rome, Italy
Tel: 39-06-23231718
Madrid, Spain
Tel: 34-91-804-4303
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Dortmund, Germany
Tel: 49-2307-3619672
Kwidzyn, Poland
Tel: 48-55-279-7025
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-757201
Weymouth, United Kingdom
Tel: 44-1305-830747
Coatbridge, Scotland
Tel: 44-1236-434455
Färjestaden, Sweden
Tel: 46-485-563934
Espoo, Finland
Tel: 358-9-5406-5000
Asia
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Shenzhen, China
Tel: 86-755-2518-1306
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 7/10/2012 11
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC/630 VDC
Other KEMET Resources
Tools
Resource Location
Con gure A Part: CapEdge http://capacitoredge.kemet.com
SPICE & FIT Software http://www.kemet.com/spice
Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask
Product Information
Resource Location
Products http://www.kemet.com/products
Technical Resources (Including Soldering Techniques) http://www.kemet.com/technicalpapers
RoHS Statement http://www.kemet.com/rohs
Quality Documents http://www.kemet.com/qualitydocuments
Product Request
Resource Location
Sample Request http://www.kemet.com/sample
Engineering Kit Request http://www.kemet.com/kits
Contact
Resource Location
Website www.kemet.com
Contact Us http://www.kemet.com/contact
Investor Relations http://www.kemet.com/ir
Call Us 1-877-MyKEMET
Twitter http://twitter.com/kemetcapacitors
Disclaimer
All product speci cations, statements, information and data (collectively, the “Information”) are subject to change without notice.
All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we
speci cally disclaim – any warranty concerning suitability for a speci c customer application or use. This Information is intended for use only by customers who have the requisite
experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the
use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur.
Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or
redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3025_PMR209 • 7/10/2012 12
Film Capacitors
AC Line EMI Suppression and RC Networks – PMR209 Series Metallized Impregnated Paper, Class X2, 250 VAC/630 VDC
Digitally signed by: Marcy Brand
DN: o=KEMET Corporation
Location: Fort Lauderdale, FL
Date: D:2012.07.30
10:18:37-05'00'
