P6SMB200A - ON Semiconductor

 Semiconductor Components Industries, LLC, 2002

January, 2002 – Rev. 0 1Publication Order Number:

P6KE200B/D

P6KE200B

600 Watt Peak Power

Transient Voltage

Suppressors

Unidirectional*

The P6KE200B is designed to protect voltage sensitive components

from high voltage, high energy transients. They have excellent

clamping capability, high surge capability, low zener impedance and

fast response time. These devices are ON Semiconductor’s exclusive,

cost-effective, highly reliable Surmetic axial leaded package and is

ideally-suited for use in communication systems, numerical controls,

process controls, medical equipment, business machines, power

supplies and many other industrial/consumer applications.

Specification Features:

•Working Peak Reverse Voltage Range – 171 V

•Peak Power – 600 Watts @ 1.0 ms

•ESD Rating of Class 3 (>16 KV) per Human Body Model

•Maximum Clamp Voltage @ Peak Pulse Current

•Low Leakage < 5.0 µA above 171 V

•Maximum Temperature Coefficient Specified

•UL 497B for Isolated Loop Circuit Protection

•Response Time is typically < 1.0 ns

Mechanical Characteristics:

CASE: Void-free, Transfer-molded, Thermosetting plastic

FINISH: All external surfaces are corrosion resistant and leads are

readily solderable

MAXIMUM LEAD TEMPERATURE FOR SOLDERING:

230C, 1/16″ from the case for 10 seconds

POLARITY: Cathode indicated by polarity band

MOUNTING POSITION: Any

MAXIMUM RATINGS

Rating Symbol Value Unit

Peak Power Dissipation (Note 1)

@ TL ≤ 25°CPPK 600 Watts

Steady State Power Dissipation

@ TL ≤ 75°C, Lead Length = 3/8″

Derated above TL = 75°C

PD5.0

Watts

mW/°C

Thermal Resistance, Junction–to–Lead RJL 15 °C/W

Forward Surge Current (Note 2)

@ TA = 25°CIFSM 100 Amps

Operating and Storage

Temperature Range TJ, Tstg – 55 to

+150 °C

1. Nonrepetitive current pulse per Figure 3 and derated above TA = 25°C per

Figure 2.

2. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses

per minute maximum.

Device Package Shipping

ORDERING INFORMATION

P6KE200B Axial Lead 1000 Units/Box

http://onsemi.com

P6KE200BRL Axial Lead 5000 Tape & Reel

L = Assembly Location

P6KE200B = Device Code

YY = Year

WW = Work Week

P6KE

200B

YYWW

Cathode Anode

AXIAL LEAD

CASE 59–09

PLASTIC

P6KE200B

http://onsemi.com

ELECTRICAL CHARACTERISTICS (TA = 25°C unless

otherwise noted, VF = 3.5 V Max. @ IF (Note 6) = 50 A)

Symbol Parameter

IPP Maximum Reverse Peak Pulse Current

VCClamping Voltage @ IPP

VRWM Working Peak Reverse Voltage

IRMaximum Reverse Leakage Current @ VRWM

VBR Breakdown Voltage @ IT

ITTest Current

VBR Maximum Temperature Coefficient of VBR

IFForward Current

VFForward Voltage @ IFUni–Directional TVS

IPP

VRWM

VCVBR VF

ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 3.5 V Max. @ IF (Note 6) = 50 A)

VRWM

Breakdown Voltage VC @ IPP (Note 5)

Device

RWM

(Note 3) IR @ VRWM VBR (Note 4) (Volts) @ ITVCIPP VBR

Device

Marking Volts µA Min Nom Max mA Volts A %/°C

P6KE200B P6KE200B 171 5 190 200 210 1 274 2.2 0.108

3. A transient suppressor is normally selected according to the maximum working peak reverse voltage (V RWM), which should be equal to or

greater than the dc or continuous peak operating voltage level.

4. VBR measured at pulse test current IT at an ambient temperature of 25°C.

5. Surge current waveform per Figure 3 and derate per Figures 1 and 2.

6. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum.

P6KE200B

http://onsemi.com

100

0.1

0.1 µs1µs10µs 100 µs 1 ms 10 ms

PP, PEAK POWER (kW)

tP, PULSE WIDTH

NONREPETITIVE PULSE

WAVEFORM SHOWN IN

FIGURE 3

Figure 1. Pulse Rating Curve

100

0 25 50 75 100 125 150 175 200

PEAK PULSE DERATING IN % OF

PEAK POWER OR CURRENT @ T

A= 25 C

TA, AMBIENT TEMPERATURE (C)

Figure 2. Pulse Derating Curve



100

001 2 34

VALUE (%)

tr ≤ 10 µs

PEAK VALUE – IPP

HALF VALUE – IPP

Figure 3. Pulse Waveform

PULSE WIDTH (tp) IS

DEFINED AS THAT

POINT WHERE THE

PEAK CURRENT

DECAYS TO 50% OF IPP.5

25 50 75 100 125 150 175 200

PD, STEADY STATE POWER DISSIPATION (WATTS)

TL, LEAD TEMPERATURE C)

3/8″

Figure 4. Steady State Power Derating

t, TIME (ms)

P6KE200B

http://onsemi.com

OUTLINE DIMENSIONS

600 Watt Peak Power

Transient Voltage Suppressors – Axial Leaded

AXIAL LEAD

CASE 59–09

ISSUE R

DIM MIN MAX MIN MAX

MILLIMETERSINCHES

A5.80 7.600.228 0.299

B2.60 3.600.102 0.142

D0.71 0.860.028 0.034

K25.44 ---1.000 ---

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCH.

3. 59-04 OBSOLETE, NEW STANDARD 59-09.

4. 59-03 OBSOLETE, NEW STANDARD 59-10.

5. ALL RULES AND NOTES ASSOCIATED WITH

JEDEC DO-41 OUTLINE SHALL APPLY.

6. POLARITY DENOTED BY CATHODE BAND.

7. LEAD DIAMETER NOT CONTROLLED WITHIN F

DIMENSION.

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes

without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular

purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,

including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or

specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be

validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.

SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications

intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or

death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold

SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable

attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim

alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.

PUBLICATION ORDERING INFORMATION

JAPAN: ON Semiconductor, Japan Customer Focus Center

4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031

Phone: 81–3–5740–2700

Email: r14525@onsemi.com

ON Semiconductor Website: http://onsemi.com

For additional information, please contact your local

Sales Representative.

P6KE200B/D

Literature Fulfillment:

Literature Distribution Center for ON Semiconductor

P.O. Box 5163, Denver, Colorado 80217 USA

Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada

Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada

Email: ONlit@hibbertco.com

N. American Technical Support: 800–282–9855 Toll Free USA/Canada