SMT Gate Drive Transformers >1500VDC Basic and Functional Insulation >1500VDC isolation (380Vrms continuous) Basic insulation (1.4mm creepage/ clearance) and functional available Operating frequency: 50kHz and up Part3,4 Number Turns Ratio Electrical Specifications @ 25C - Operating Temperature -40C to +130C5 Primary Leakage2 DCR Pri-Sec MAX1 Inductance Inductance Primary Isolation V*sec (H MIN) (H MAX) ( MAX) DCR Secondary ( MAX) Package Size (L x W x H) (mm MAX) Functional Insulation PE-68386NL 1:1 1500 Vdc 9.7 P0926NL 1:1:1 1500 Vdc 23.8 P0544NL 1:1:1 1500 Vdc 45.1 PA0264NL 1:1:1 1000 Vrms 12.7 PA1323NL 1:1 1500 Vrms 21.7 Basic Insulation (1.4mm creepage and clearance between Primary and Secondary) PA0173NL 1:1:1 1500 Vrms 17.2 PA0185NL 1:1 1500 Vrms 17.2 PA0184NL 1:1 1500 Vrms 27.2 PA0297NL 2:1:1 1500 Vrms 27.2 PA2777NL 1:1 1500 Vrms 9.3 PA0510NL 2.5:1:1 1500 Vrms 27.2 PA3493NL 1.25:1 1650 Vrms 785 300 3300 1140 600 0.46 0.50 0.80 0.65 2.0 0.60 2.00 1.25 0.75 1.25 0.60 2.00 1.25 0.75 1.25 8.6 x 6.7 x 2.5 8.0 x 6.6 x 5.3 9.0 x 8.6 x 7.6 8.6 x 6.7 x 3.6 9.5 x 7.1 x 5.3 980 980 1200 1200 335.2 1200 0.75 0.75 0.50 0.60 0.36 0.68 0.62 0.88 0.91 0.91 0.70 0.91 0.88 0.62 0.91 0.46 0.70 0.380 11.8 x 8.8 x 4.0 11.8 x 8.8 x 4.0 9.0 x 8.6 x 7.6 9.0 x 8.6 x 7.6 7.1 x 6.1 x 5.5 9.0 x 8.6 x 7.6 656 1.3 1.03 0.85 10.9 x 9.7 x 2.7 23 Notes: 1. 2. 3. The Maximum volt-sec rating limits the peak flux density to 2200 Gauss when used in a unipolar drive application. For bi-polar drive applications, a maximum volt-sec of two times this rating is acceptable (ie: 2* (volt*sec rating) = (voltage applied to the primary) * dutycycle / Frequency = V * alpha / Freq_Hz = V * sec Leakage inductance is measured at primary terminals with all secondaries shorted. Optional Tape & Reel packaging can be ordered by adding a "T" suffix to the part number (i.e. P0544NL becomes P0544NLT). Pulse complies to industry standard tape and reel specification EIA481. 1 power.pulseelectronics.com 4. 5. 6. The "NL" suffix indicates an RoHS-compliant part number. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. Continuous isolation voltage confirmed by 125C/1000hrs accelerated aging with the bias voltage applied between primary and secondary windings SPM2007 (08/18) http://www.power.pulseelectronics.com/contact SMT Gate Drive Transformers >1500VDC Basic and Functional Insulation Mechanicals Schematics PE-68386NL 1 6 3 4 Weight .............................0.28 grams Tape & Reel .........................1500/reel Tube ......................................60/tube Inches mm .010 Unless otherwise specified, all tolerances are 0,25 Dimension: SUGGESTED PAD LAYOUT Mechanicals Schematics P0264NL NL Weight .............................0.28 grams Tape & Reel .........................1500/reel Tube ......................................60/tube Inches mm .010 Unless otherwise specified, all tolerances are 0,25 Dimension: Mechanicals Schematics P0926NL NL Weight .............................0.48 grams Tape & Reel .........................1000/reel Tube ......................................80/tube Inches mm .010 Unless otherwise specified, all tolerances are 0,25 Dimension: 2 power.pulseelectronics.com SPM2007 (08/18) http://www.power.pulseelectronics.com/contact SMT Gate Drive Transformers >1500VDC Basic and Functional Insulation Mechanicals (continued) Schematics P0544NL P0544NL Weight .............................0.60 grams Tape & Reel ............................40/reel Tube ......................................50/tube Inches mm .010 Unless otherwise specified, all tolerances are 0,25 Dimension: Schematics Mechanicals PA0297NL, PA0510NL, PA0184NL PA0297NL / PA0510NL PA0184NL Weight .............................0.60 grams Tape & Reel ............................40/reel Tube ......................................50/tube Inches mm .010 Unless otherwise specified, all tolerances are 0,25 * for PA0184 the pads for pins 3 and 6 in the suggested pad layout should not be used in the layout Dimension: 3 power.pulseelectronics.com SPM2007 (08/18) http://www.power.pulseelectronics.com/contact SMT Gate Drive Transformers >1500VDC Basic and Functional Insulation Schematics Mechanicals (continued) PA0173NL, PA0185NL PA0173NL PART NUMBER PA0185NL SUGGESTED PAD LAYOUT Weight .............................0.48 grams Tape & Reel ..........................900/reel Tube .......................................60/tube Inches mm .010 Unless otherwise specified, all tolerances are 0,25 Dimension: Schematics Mechanicals PA3493NL mm mm 0$; mm mm mm 0$; mm PA3493NL DATE CODE CTRY OF MFG 3 mm mm 4 ______________ 6 1 ______________ ______________ ______________ SUGGESTED FOOTPRINT 1 6 3 4 Weight .............................0.31 grams Tape & Reel .........................1250/reel Tube ......................................50/tube Dimension: mm Unless otherwise specified, all tolerances are 0,25 mm 0$; 685)$&(6 4 power.pulseelectronics.com SPM2007 (08/18) http://www.power.pulseelectronics.com/contact SMT Gate Drive Transformers >1500VDC Basic and Functional Insulation Schematics Mechanicals (continued) PA2777NL 6.3 6.3mm MAX 5.9mm MAX 8X 0.76 8X 0.508mm 8X 1.52 8X 0.89mm 7.4mm MAX .15 4.45 0.127 4.06.25mm 3X 1.27mm 6.22 3X 1.27 BOTTOM VIEW SUGGESTED LAND PATTERN TOP VIEW Weight .............................0.32 grams Tape & Reel ..........................850/reel Tube ......................................120/tube Dimension: mm FINAL OUTLINE Unless otherwise specified, all tolerances are 0,25 Schematics Mechanicals PA1323NL 1 6 3 4 Weight ...............................0.4 grams Tape & Reel ..........................700/reel Tube .....................................225/tube 7.11mm MAX Dimension: mm Unless otherwise specified, all tolerances are 0,25 5.33mm MAX 0.127 1.27mm .609X.254 1.27mm (4X)2.54mm REF 5.08mm 2.54mm 9.52mm MAX 9.52mm 5.08mm REF 5 power.pulseelectronics.com SPM2007 (08/18) http://www.power.pulseelectronics.com/contact SMT Gate Drive Transformers >1500VDC Basic and Functional Insulation For More Information Pulse Worldwide Pulse Europe Headquarters Pulse Electronics GmbH 15255 Innovation Drive Ste 100 Am Rottland 12 San Diego, CA 92128 58540 Meinerzhagen U.S.A. Germany Tel: 858 674 8100 Fax: 858 674 8262 Tel: 49 2354 777 100 Fax: 49 2354 777 168 Pulse China Headquarters Pulse Electronics (ShenZhen) CO., LTD D708, Shenzhen Academy of Aerospace Technology, The 10th Keji South Road, Nanshan District, Shenzhen, P.R. China 518057 Pulse North China Room 2704/2705 Super Ocean Finance Ctr. 2067 Yan An Road West Shanghai 200336 China Pulse South Asia 3 Fraser Street 0428 DUO Tower Singapore 189352 Pulse North Asia 1F., No.111 Xiyuan Rd Zhongli City Taoyuan City 32057 Taiwan (R.O.C) Tel: 86 755 33966678 Fax: 86 755 33966700 Tel: 86 21 62787060 Fax: 86 2162786973 Tel: 65 6287 8998 Fax: 65 6280 0080 Tel: 886 3 4356768 Fax: 886 3 4356820 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. (c) Copyright, 2018. Pulse Electronics, Inc. All rights reserved. 6 power.pulseelectronics.com SPM2007 (08/18) http://www.power.pulseelectronics.com/contact