POWER 1500Watts VOLTAGE 5.0 to 188 Volts SMCJ5.0 THRU SMCJ188CA Features * Underwriters Laboratory recognition under UL standard for safety 497B : Isolated loop curcuit protection * Low profile package with built-in strain relief for surface mounted applications * Glass passivated junction * Low incremental surge resistance, excellent clamping capability * 1500W peak pulse power capability with a 10/1000S waveform, repetition rate(duty cycle) : 0.01% * Very fast response time * High temperature soldering guaranteed : 250/10 seconds at terminals Mechanical Data * Case : JEDEC DO-214AB(SMC) molded plastic over passivated chip * Terminals : Solder plated , solderable per MIL-STD-750, method 2026 * Polarity : For uni-directional types the band denotes the cathode, which is positive with respect to the anode under normal TVS operation * Mounting Position : Any * Weight : 0.007 ounce, 0.25 gram DO-214AB (SMC) 0.245(6.22) 0.220(5.59) 0.124(3.15) 0.108(2.75) 0.280(7.11) 0.260(6.60) 0.012(0.31) 0.006(0.15) 0.103(2.62) 0.079(2.00) 0.050(1.27) 0.030(0.76) 0.008(0.203) MAX. 0.320(8.13) 0.305(7.75) Dimensions in inches and (millimeters) Devices For Bidirectional Applications * For bi-directional devices, use suffix C or CA (e.g. SMCJ10C, SMCJ10CA). Electrical characteristics apply in both directions. Maximum Ratings And Electrical Characteristics (Ratings at 25 ambient temperature unless otherwise specified) Symbols Values Units Peak pulse power dissipation with a 10/1000S waveform (Note 1,2) PPPM Minimum 1500 Watts Peak pulse current with a waveform (Note 1) IPPM See next table Amps Peak forward surge current, 8.3mm single half sine-wave unidirectional only (Note 2) IFSM 200 Amps Typical thermal resistance, junction to ambient (Note 3) RJA 75 /W Typical thermal resistance, junction to lead RJL 15 /W Operating junction and storage temperature range TJ,TSTG -55 to +150 Notes: (1) Non repetitive current pulse, per Fig.3 and derated above TA=25 per Fig.2 (2) Mounted on 0.31x0.31"(8.0x8.0mm) copper pads to each terminal (3) Mounted on minimum recommended pad layout ELECTRICAL CHARACTERISTIC Ratings at 25 ambient temperature unless otherwise specified. VF=3.5V at IF=100A (uni-directional only) Device Type S MC J 5.0(C ) S MC J 5.0(C )A(5) S MC J 6.0(C ) S MC J 6.0(C )A S MC J 6.5(C ) S MC J 6.5(C )A S MC J 7.0(C ) S MC J 7.0(C )A S MC J 7.5(C ) S MC J 7.5(C )A S MC J 8.0(C ) S MC J 8.0(C )A S MC J 8.5(C ) S MC J 8.5(C )A S MC J 9.0(C ) S MC J 9.0(C )A S MC J 10(C ) S MC J 10(C )A S MC J 11(C ) S MC J 11(C )A S MC J 12(C ) S MC J 12(C )A S MC J 13(C ) S MC J 13(C )A S MC J 14(C ) S MC J 14(C )A S MC J 15(C ) S MC J 15(C )A S MC J 16(C ) S MC J 16(C )A S MC J 17(C ) S MC J 17(C )A S MC J 18(C ) S MC J 18(C )A S MC J 20(C ) S MC J 20(C )A S MC J 22(C ) S MC J 22(C )A S MC J 24(C ) S MC J 24(C )A S MC J 26(C ) S MC J 26(C )A S MC J 28(C ) S MC J 28(C )A S MC J 30(C ) S MC J 30(C )A Notes : (1) (2) (3) (4) (5) Device Marking Code UNI BI G DD G DD G DE G DE G DF G DF G DG G DG G DH B DH G DK B DK G DL G DL G DM G DM G DN B DN G DP B DP G DQ B DG G DR B DR G DS B DS G DT B DT G DU B DU G DV B DV G DW B DW G DX B DX G DY G DY G DZ G DZ GE D BE D GE E BE E GE F GE F GE G GE G GE H BE H GE K BE K GE L BE L GE M BE M GE N GE N GE P GE P GE Q GE Q GE R GE R GE S BE S GE T BE T GE U BE U GE V BE V GE W BE W GE X BE X GE Y BE Y GE Z BE Z GFD BFD GFE BFE GFF BFF GFG BFG GFH BFH GFK BFK Breakdown Voltage V(BR) at I T (1) (V) Min Max 6.40 7.82 6.40 7.07 6.67 8.15 6.67 7.37 7.22 8.82 7.22 7.98 7.78 9.51 7.78 8.60 8.33 10.2 8.33 9.21 8.89 10.9 8.89 9.83 9.44 11.5 9.44 10.4 10.0 12.2 10.0 11.1 11.1 13.6 11.1 12.3 12.2 14.9 12.2 13.5 13.3 16.3 13.3 14.7 14.4 17.6 14.4 15.9 15.6 19.1 15.6 17.2 16.7 20.4 16.7 18.5 17.8 21.8 17.8 19.7 18.9 23.1 18.9 20.9 20.0 24.4 20.0 22.1 22.2 27.1 22.2 24.5 24.4 29.8 24.4 26.9 26.7 32.6 26.7 29.5 28.9 35.3 28.9 31.9 31.1 38.0 31.1 34.4 33.3 40.7 33.3 36.8 Test Current I T (mA) Stand-off Voltage VWM (V) 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 20 20 22 22 24 24 26 26 28 28 30 30 P uls e tes t: tp 50ms S urge current waveform per F ig. 3 and derate per F ig. 2 For bi-directional types having V WM of 10 V olts and les s, the I D limit is doubled All terms and s ymbols are cons is tent with ANS I/IE E E C 62.35 For the bi-directional S MC G /S MC J 5.0C A, the maximum V (B R ) is 7.25V Maximum Maximum Maximum Reverse Leakage Peak Pulse Surge Clamping at V WM Current I PPM Voltage at I PPM ID (A) (3) (A) (2) VC (V) 1000 156.3 9.6 1000 163.0 9.2 1000 131.6 11.4 1000 145.6 10.3 500 122.0 12.3 500 133.9 11.2 200 112.8 13.3 200 125.0 12.0 100 104.9 14.3 100 116.3 12.9 50 100.0 15.0 50 110.3 13.6 20 94.3 15.9 20 104.2 14.4 10 88.8 16.9 10 97.4 15.4 5.0 79.8 18.8 5.0 88.2 17.0 5.0 74.6 20.1 5.0 82.4 18.2 5.0 68.2 22.0 5.0 75.4 19.9 1.0 63.0 23.8 1.0 69.8 21.5 1.0 58.1 25.8 1.0 64.7 23.2 1.0 55.8 26.9 1.0 61.5 24.4 1.0 52.1 28.8 1.0 57.7 26.0 1.0 49.2 30.5 1.0 54.3 27.6 1.0 46.6 32.2 1.0 51.4 29.2 1.0 41.9 35.8 1.0 46.3 32.4 1.0 38.1 39.4 1.0 42.3 35.5 1.0 34.9 43.0 1.0 38.6 38.9 1.0 32.2 46.6 1.0 35.6 42.1 1.0 30.0 50.0 1.0 33.0 45.4 1.0 28.0 53.5 1.0 31.0 48.4 ELECTRICAL CHARACTERISTIC Ratings at 25 ambient temperature unless otherwise specified. VF=3.5V at IF=100A (uni-directional only) Device Type S MC J 33(C ) S MC J 33(C )A S MC J 36(C ) S MC J 36(C )A S MC J 40(C ) S MC J 40(C )A S MC J 43(C ) S MC J 43(C )A S MC J 45(C ) S MC J 45(C )A S MC J 48(C ) S MC J 48(C )A S MC J 51(C ) S MC J 51(C )A S MC J 54(C ) S MC J 54(C )A S MC J 58(C ) S MC J 58(C )A S MC J 60(C ) S MC J 60(C )A S MC J 64(C ) S MC J 64(C )A S MC J 70(C ) S MC J 70(C )A S MC J 75(C ) S MC J 75(C )A S MC J 78(C ) S MC J 78(C )A S MC J 85(C ) S MC J 85(C )A S MC J 90(C ) S MC J 90(C )A S MC J 100(C ) S MC J 100(C )A S MC J 110(C ) S MC J 110(C )A S MC J 120(C ) S MC J 120(C )A S MC J 130(C ) S MC J 130(C )A S MC J 150(C ) S MC J 150(C )A S MC J 160(C ) S MC J 160(C )A S MC J 170(C ) S MC J 170(C )A S MC J 188(C ) S MC J 188(C )A Notes : (1) (2) (3) (4) Device Marking Code UNI BI GFL BFL GFM BFM GFN BFN GFP BFP GFQ BFQ GFR BFR GFS BFS GFT BFT GFU GFU GFV GFV GFW GFW GFX GFX GFY GFY GFZ GFZ GGD GGD GGE GGE GGF GGF GGG GGG GGH GGH GGK GGK GGL GGL GGM GGM GGN GGN GGP GGP GGQ GGQ GGR GGR GGS GGS GGT GGT GGU GGU GGV GGV GGW GGW GGX GGX GGY GGY GGZ GGZ G HD G HD G HE G HE G HF G HF G HG G HG G HH G HH G HK G HK G HL G HL G HM G HM G HN G HN G HP G HP G HQ G HQ G HR G HR G HT G HT G HS G HS Breakdown Voltage V(BR) at I T (1) (V) Min Max 36.7 44.9 36.7 40.6 40.0 48.9 40.0 44.2 44.4 54.3 44.4 49.1 47.8 58.4 47.8 52.8 50.0 61.1 50.0 55.3 53.3 65.1 53.3 58.9 56.7 69.3 56.7 62.7 60.0 73.3 60.0 66.3 64.4 78.7 64.4 71.2 66.7 81.5 66.7 73.7 71.1 86.9 71.1 78.6 77.8 95.1 77.8 86.0 83.3 102 83.3 92.1 86.7 106 86.7 95.8 94.4 115 94.4 104 100 122 100 111 111 136 111 123 122 149 122 135 133 163 133 147 144 176 144 159 167 204 167 185 178 218 178 197 189 231 189 209 209 255 209 231 Test Current I T (mA) Stand-off Voltage VWM (V) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 33 33 36 36 40 40 43 43 45 45 48 48 51 51 54 54 58 58 60 60 64 64 70 70 75 75 78 78 85 85 90 90 100 100 110 110 120 120 130 130 150 150 160 160 170 170 188 188 P uls e tes t: tp = 50ms S urge current waveform per F ig. 3 and derate per F ig. 2 For bi-directional types having V WM of 10 V olts and les s, the I D limit is doubled All terms and s ymbols are cons is tent with ANS I/IE E E C 62.35 Maximum Maximum Maximum Reverse Leakage Peak Pulse Surge Clamping at VWM Current I PPM Voltage at I PPM ID (A) (3) (A) (2) VC (V) 1.0 25.4 59.0 1.0 28.1 53.3 1.0 23.3 64.3 1.0 25.8 58.1 1.0 21.0 71.4 1.0 23.3 64.5 1.0 19.6 76.7 1.0 21.6 69.4 1.0 18.7 80.3 1.0 20.6 72.7 1.0 17.5 85.5 1.0 19.4 77.4 1.0 16.5 91.1 1.0 18.2 82.4 1.0 15.6 96.3 1.0 17.2 87.1 1.0 14.6 103 1.0 16.0 93 1.0 14.0 107 1.0 15.5 96 1.0 13.2 114 1.0 14.6 103 1.0 12.0 125 1.0 13.3 113 1.0 11.2 134 1.0 12.4 121 1.0 10.8 139 1.0 11.9 126 1.0 9.9 151 1.0 10.9 137 1.0 9.4 160 1.0 10.3 146 1.0 8.4 179 1.0 9.3 162 1.0 7.7 196 1.0 8.5 177 1.0 7.0 214 1.0 7.8 193 1.0 6.5 231 1.0 7.2 209 1.0 5.6 268 1.0 6.2 243 1.0 5.2 287 1.0 5.8 259 1.0 4.9 304 1.0 5.5 275 1.0 4.4 344 1.0 4.6 328 RATINGS AND CHARACTERISTIC CURVES SMCJ5.0 THRU SMCJ188CA Fig. 2 P uls e Derating C ur ve Fig. 1P eak P uls e Po wer R ating C ur ve 100 P eak P uls e P ower (P P P ) or C urrent (I P P ) Derating in P ercentage, % 10 1 P PPM , P eak P uls e P ower (kW) 100 0.31 x 0.31" (8.0 x 8.0mm) C opper P ad Areas 0.1 0.1s 1.0s 1 0s td , 100s 1.0ms 75 50 25 0 10ms 0 P uls e Width (s ec.) 50 IP P 2 1.0 3.0 2.0 t, 200 100 o Uni-Directional B i-Directional 10 4.0 1 T J = 25 C f = 1.0MHz V s ig = 50mV p-p 10 V WM , Time (ms ) 100 400 R evers e S tand-Off Voltage (V ) Fig. 6 - Maximum Non-R epetitive Forward S urge C urrent Uni-Directional Us e Only F ig. 5T ypic al Trans ient T hermal Impedanc e 100 200 P eak F orward S urge C urrent, Amperes Trans ient T hermal Impedance ( oC /W) 175 V R , Meas ured at S tand-Off Voltage, V WM CJ , 10/1000s W aveform as defined by R .E .A. 0 150 1,000 td 0 125 Meas ured at Zero B ias 10,000 J unction C apacitance (pF ) Half Value IP P M IP P M , P eak P uls e C urrent, % I R S M P eak Value IP P M 100 20,000 o 100 75 Ambient Temperature ( oC ) Fig. 4 Typical J unction C apacitance Uni-Directional T J = 25 C P uls e Width (td) is defined as the point where the peak current decays to 50% of I P P M tr = 10s 50 TA , Fig. 3 P uls e Waveform 150 25 100 10 1.0 0.1 0.001 8.3ms S ingle Half S ine-Wave (J E DE C Method) T J = T J max. 10 0.01 0.1 tp , 1 10 P uls e Duration (s ec) 100 1000 1 10 Number of C ycles at 60Hz 100