FMN CONNECTOR 1.0mm Emboss Tape Connectors for FFC (.039") pitch Features------------------------ * Compact 3.0mm(.118") high <side entry type> and 5.1mm(.201")<top entry type>. * Low insertion force There are no slides or levers to operate on this reduced insertion force connector. It requires 1/2 the insertion force of JST's conventional FFC connector, but retains stable contact performance when subjected to environmental and mechanical stresses. * Both through-hole and SMT types are available SMT type connectors have heat-resistant housings so that solder reflow is possible. They also have solder tabs for extra strength. * Embossed tape for automatic mounting The SMT type FMN connector is supplied in embossed tape Through-hole type packaging, for mounting by automatic placement machines. Specifications ------------------- SMT type * Current rating: 0.5A DC * Voltage rating: 50V DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/30m max. After environmental testing/50m max. * Insulation resistance: 500M min. * Withstanding voltage: 500V AC/minute * Applicable FFC: Lead pitch /1.0mm(.039") Lead width /0.7mm(.028") Mating part thickness / 0.30 0.05mm(.012" .002") * Applicable PC board thickness: 1.6mm(.063") <Note>FFC to be actually used should be checked for applicability. * Contact JST if Lead-Free product is required. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards ---------------------- 0 Recognized E60389 1 Certified LR20812 531 FMN CONNECTOR Through-hole type Connector ---------------------------------------------- Top entry type B C Side entry type 3.0 (.118) 5.1 (.201) 3.0 (.118) 3.0 (.118) B 5.1(.201) Circuit No. 1 <Note> 3.0 (.118) 0.4(.016) 1.0(.039) 2.0 (.079) 0.65 (.026) <Note> Normal type: The solder tail for cricuit No.1 contact is positioned in front. Reverse type: The solder tail for cricuit No.1 contact is positioned behind. Circuits Top entry type Normal type 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 04FMN-BTK-A 05FMN-BTK-A 06FMN-BTK-A 07FMN-BTK-A 08FMN-BTK-A 09FMN-BTK-A 10FMN-BTK-A 11FMN-BTK-A 12FMN-BTK-A 13FMN-BTK-A 14FMN-BTK-A 15FMN-BTK-A 16FMN-BTK-A 17FMN-BTK-A 18FMN-BTK-A 19FMN-BTK-A 20FMN-BTK-A 21FMN-BTK-A 22FMN-BTK-A 23FMN-BTK-A 24FMN-BTK-A 25FMN-BTK-A 26FMN-BTK-A 27FMN-BTK-A 28FMN-BTK-A 29FMN-BTK-A 30FMN-BTK-A 31FMN-BTK-A 32FMN-BTK-A 33FMN-BTK-A 34FMN-BTK-A 35FMN-BTK-A 36FMN-BTK-A 37FMN-BTK-A 38FMN-BTK-A 39FMN-BTK-A 40FMN-BTK-A Reverse type 04FMN-BTRK-A 05FMN-BTRK-A 06FMN-BTRK-A 07FMN-BTRK-A 08FMN-BTRK-A 09FMN-BTRK-A 10FMN-BTRK-A 11FMN-BTRK-A 12FMN-BTRK-A 13FMN-BTRK-A 14FMN-BTRK-A 15FMN-BTRK-A 16FMN-BTRK-A 17FMN-BTRK-A 18FMN-BTRK-A 19FMN-BTRK-A 20FMN-BTRK-A 21FMN-BTRK-A 22FMN-BTRK-A 23FMN-BTRK-A 24FMN-BTRK-A 25FMN-BTRK-A 26FMN-BTRK-A 27FMN-BTRK-A 28FMN-BTRK-A 29FMN-BTRK-A 30FMN-BTRK-A 31FMN-BTRK-A 32FMN-BTRK-A 33FMN-BTRK-A 34FMN-BTRK-A 35FMN-BTRK-A 36FMN-BTRK-A 37FMN-BTRK-A 38FMN-BTRK-A 39FMN-BTRK-A 40FMN-BTRK-A Model No. Side entry type Normal type 04FMN-STK-A 05FMN-STK-A 06FMN-STK-A 07FMN-STK-A 08FMN-STK-A 09FMN-STK-A 10FMN-STK-A 11FMN-STK-A 12FMN-STK-A 13FMN-STK-A 14FMN-STK-A 15FMN-STK-A 16FMN-STK-A 17FMN-STK-A 18FMN-STK-A 19FMN-STK-A 20FMN-STK-A 21FMN-STK-A 22FMN-STK-A 23FMN-STK-A 24FMN-STK-A 25FMN-STK-A 26FMN-STK-A 27FMN-STK-A 28FMN-STK-A 29FMN-STK-A 30FMN-STK-A 31FMN-STK-A 32FMN-STK-A 33FMN-STK-A 34FMN-STK-A 35FMN-STK-A 36FMN-STK-A 37FMN-STK-A 38FMN-STK-A 39FMN-STK-A 40FMN-STK-A 0.4(.016) 1.0(.039) Side entry type with stop Reverse type 04FMN-STRK-A 05FMN-STRK-A 06FMN-STRK-A 07FMN-STRK-A 08FMN-STRK-A 09FMN-STRK-A 10FMN-STRK-A 11FMN-STRK-A 12FMN-STRK-A 13FMN-STRK-A 14FMN-STRK-A 15FMN-STRK-A 16FMN-STRK-A 17FMN-STRK-A 18FMN-STRK-A 19FMN-STRK-A 20FMN-STRK-A 21FMN-STRK-A 22FMN-STRK-A 23FMN-STRK-A 24FMN-STRK-A 25FMN-STRK-A 26FMN-STRK-A 27FMN-STRK-A 28FMN-STRK-A 29FMN-STRK-A 30FMN-STRK-A 31FMN-STRK-A 32FMN-STRK-A 33FMN-STRK-A 34FMN-STRK-A 35FMN-STRK-A 36FMN-STRK-A 37FMN-STRK-A 38FMN-STRK-A 39FMN-STRK-A 40FMN-STRK-A Normal type 6.5(.256) C 5.1(.201) 04FMN-SSTK-A 05FMN-SSTK-A 06FMN-SSTK-A 07FMN-SSTK-A 08FMN-SSTK-A 09FMN-SSTK-A 10FMN-SSTK-A 11FMN-SSTK-A 12FMN-SSTK-A 13FMN-SSTK-A 14FMN-SSTK-A 15FMN-SSTK-A 16FMN-SSTK-A 17FMN-SSTK-A 18FMN-SSTK-A 19FMN-SSTK-A 20FMN-SSTK-A 21FMN-SSTK-A 22FMN-SSTK-A 23FMN-SSTK-A 24FMN-SSTK-A 25FMN-SSTK-A 26FMN-SSTK-A 27FMN-SSTK-A 28FMN-SSTK-A 29FMN-SSTK-A 30FMN-SSTK-A 31FMN-SSTK-A 32FMN-SSTK-A 33FMN-SSTK-A 34FMN-SSTK-A 35FMN-SSTK-A 36FMN-SSTK-A 37FMN-SSTK-A 38FMN-SSTK-A 39FMN-SSTK-A 40FMN-SSTK-A Circuit No. 1 <Note> A 2.65 (.104) Dimensions mm(in.) Reverse type A B C 04FMN-SSTRK-A 05FMN-SSTRK-A 06FMN-SSTRK-A 07FMN-SSTRK-A 08FMN-SSTRK-A 09FMN-SSTRK-A 10FMN-SSTRK-A 11FMN-SSTRK-A 12FMN-SSTRK-A 13FMN-SSTRK-A 14FMN-SSTRK-A 15FMN-SSTRK-A 16FMN-SSTRK-A 17FMN-SSTRK-A 18FMN-SSTRK-A 19FMN-SSTRK-A 20FMN-SSTRK-A 21FMN-SSTRK-A 22FMN-SSTRK-A 23FMN-SSTRK-A 24FMN-SSTRK-A 25FMN-SSTRK-A 26FMN-SSTRK-A 27FMN-SSTRK-A 28FMN-SSTRK-A 29FMN-SSTRK-A 30FMN-SSTRK-A 31FMN-SSTRK-A 32FMN-SSTRK-A 33FMN-SSTRK-A 34FMN-SSTRK-A 35FMN-SSTRK-A 36FMN-SSTRK-A 37FMN-SSTRK-A 38FMN-SSTRK-A 39FMN-SSTRK-A 40FMN-SSTRK-A 3.0( .118) 4.0( .157) 5.0( .197) 6.0( .236) 7.0( .276) 8.0( .315) 9.0( .354) 10.0( .394) 11.0( .433) 12.0( .472) 13.0( .512) 14.0( .551) 15.0( .591) 16.0( .630) 17.0( .669) 18.0( .709) 19.0( .748) 20.0( .787) 21.0( .827) 22.0( .866) 23.0( .906) 24.0( .945) 25.0( .984) 26.0(1.024) 27.0(1.063) 28.0(1.102) 29.0(1.142) 30.0(1.181) 31.0(1.220) 32.0(1.260) 33.0(1.299) 34.0(1.339) 35.0(1.378) 36.0(1.417) 37.0(1.457) 38.0(1.496) 39.0(1.535) 6.0( .236) 7.0( .276) 8.0( .315) 9.0( .354) 10.0( .394) 11.0( .433) 12.0( .472) 13.0( .512) 14.0( .551) 15.0( .591) 16.0( .630) 17.0( .669) 18.0( .709) 19.0( .748) 20.0( .787) 21.0( .827) 22.0( .866) 23.0( .906) 24.0( .945) 25.0( .984) 26.0(1.024) 27.0(1.063) 28.0(1.102) 29.0(1.142) 30.0(1.181) 31.0(1.220) 32.0(1.260) 33.0(1.299) 34.0(1.339) 35.0(1.378) 36.0(1.417) 37.0(1.457) 38.0(1.496) 39.0(1.535) 40.0(1.575) 41.0(1.614) 42.0(1.654) 5.0( .197) 6.0( .236) 7.0( .276) 8.0( .315) 9.0( .354) 10.0( .394) 11.0( .433) 12.0( .472) 13.0( .512) 14.0( .551) 15.0( .591) 16.0( .630) 17.0( .669) 18.0( .709) 19.0( .748) 20.0( .787) 21.0( .827) 22.0( .866) 23.0( .906) 24.0( .945) 25.0( .984) 26.0(1.024) 27.0(1.063) 28.0(1.102) 29.0(1.142) 30.0(1.181) 31.0(1.220) 32.0(1.260) 33.0(1.299) 34.0(1.339) 35.0(1.378) 36.0(1.417) 37.0(1.457) 38.0(1.496) 39.0(1.535) 40.0(1.575) 41.0(1.614) Material and Finish Contact: Phosphor bronze, copper-undercoated, tin/lead-plated Housing: 4 to 22 circuits/PBT, UL94V-0 23 to 40 circuits/Modified 6T nylon, UL94V-0 Normal type...gray Reverse type...black 532 B 2.0 (.079) 3.0 (.118) A Side entry type with stop 2.65 (.104) 3.0 (.118) Circuit No. 1 <Note> 0.4(.016) 1.0(.039) A 2.0 (.079) Q'ty / box Top entry Side entry Side entry type type type with stop 3,600 3,100 2,700 2,400 2,100 1,900 1,800 1,600 1,500 1,400 1,300 1,200 1,200 1,100 1,000 1,000 900 900 900 800 800 800 700 700 700 700 600 600 600 600 600 500 500 500 500 500 500 2,160 1,860 1,620 1,440 1,260 1,140 1,080 960 900 840 780 720 720 660 600 600 540 540 540 480 480 480 420 420 420 420 360 360 360 360 360 300 300 300 300 300 300 2,520 2,170 1,890 1,680 1,470 1,330 1,260 1,120 1,050 980 910 840 840 770 700 700 630 630 630 560 560 560 490 490 490 490 420 420 420 420 420 350 350 350 350 350 350 FMN CONNECTOR Through-hole type PC board layout (viewed from component side) -------------------- Side entry type Top entry type <Normal type> <Normal type> Circuit No.1 0.750.05 (.030.002) 2.00.05 (.079.002) 2.00.05 (.079.002) 0.750.05 (.030.002)dia. 2.00.05 (.079.002) Odd number circuits 2.00.05 (.079.002) Odd number circuits Even number circuits Even number circuits Circuit No.1 1.00.05 (.039.002) 1.00.05 (.039.002) <Reverse type> <Reverse type> 2.00.05 (.079.002) 0.750.05 (.030.002) 2.00.05 (.079.002) 0.750.05 (.030.002)dia. Circuit No.1 Even number circuits 1.00.05 (.039.002) Even number circuits 2.00.05 (.079.002) 2.00.05 (.079.002) Odd number circuits Odd number circuits Circuit No.1 1.00.05 (.039.002) Note: 1. Tolerances are non-cumulative: 0.05mm(.002" ) for all centers. 2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. Through-hole type Assembly layout ----------------------------------------- Side entry type Top entry type Contact point 5.1(.201) 3.0(.118) Contact point 5.1(.201) 3.0(.118) 2.65(.104) 0.65(.026) 533 FMN CONNECTOR SMT type Connector ------------------------------------------------------- Top entry type <In-line> <Staggered> B C A B C A 1.0(.039) 1.0(.039) Normal type 0.4(.016) 0.4(.016) Circuit No.1 B C A 0.4(.016) 1.0(.039) Circuit No.1 B C A Circuit No.1 1.0(.039) Circuit No.1 Reverse type 0.4(.016) B 1.0(.039) 1.5 (.059) 0.7(.028) 0.7(.028) 3.0(.118) Circuit No. 1 Side entry type 0.4(.016) Circuit No.1 Circuit No. 1 B C 3.0(.118) 5.1(.201) 1.5 (.059) 0.2(.008) 1.0(.039) A 534 1.5 (.059) 0.7(.028) 5.1(.201) 5.1(.201) B 0.7(.028) 3.0(.118) 0.7(.028) FMN Model No. Circuits Dimensions mm(in.) Top entry type Single-row Normal type Reverse type CONNECTOR Staggered Normal type Reverse type Q'ty / reel B Side entry type A Top entry type Side entry type C Top entry Side entry type type 4 04FMN-BMT-A-TF 04FMN-BMTR-A-TB 04FMN-BMTTN-A-TF 04FMN-BMTTR-A-TB 04FMN-SMT-A-TF 3.0( .118) 6.0( .236) 7.0( .276) 5.0( .197) 1,000 2,000 5 05FMN-BMT-A-TF 05FMN-BMTR-A-TB 05FMN-BMTTN-A-TF 05FMN-BMTTR-A-TB 05FMN-SMT-A-TF 4.0( .157) 7.0( .276) 8.0( .315) 6.0( .236) 1,000 2,000 6 06FMN-BMT-A-TF 06FMN-BMTR-A-TB 06FMN-BMTTN-A-TF 06FMN-BMTTR-A-TB 06FMN-SMT-A-TF 5.0( .197) 8.0( .315) 9.0( .354) 7.0( .276) 1,000 2,000 7 07FMN-BMT-A-TF 07FMN-BMTR-A-TB 07FMN-BMTTN-A-TF 07FMN-BMTTR-A-TB 07FMN-SMT-A-TF 6.0( .236) 9.0( .354) 10.0( .394) 8.0( .315) 1,000 2,000 8 08FMN-BMT-A-TF 08FMN-BMTR-A-TB 08FMN-BMTTN-A-TF 08FMN-BMTTR-A-TB 08FMN-SMT-A-TF 7.0( .276) 10.0( .394) 11.0( .433) 9.0( .354) 1,000 2,000 9 09FMN-BMT-A-TF 09FMN-BMTR-A-TB 09FMN-BMTTN-A-TF 09FMN-BMTTR-A-TB 09FMN-SMT-A-TF 8.0( .315) 11.0( .433) 12.0( .472) 10.0( .394) 1,000 2,000 10 10FMN-BMT-A-TF 10FMN-BMTR-A-TB 10FMN-BMTTN-A-TF 10FMN-BMTTR-A-TB 10FMN-SMT-A-TF 9.0( .354) 12.0( .472) 13.0( .512) 11.0( .433) 1,000 2,000 11 11FMN-BMT-A-TF 11FMN-BMTR-A-TB 11FMN-BMTTN-A-TF 11FMN-BMTTR-A-TB 11FMN-SMT-A-TF 10.0( .394) 13.0( .512) 14.0( .551) 12.0( .472) 1,000 2,000 12 12FMN-BMT-A-TF 12FMN-BMTR-A-TB 12FMN-BMTTN-A-TF 12FMN-BMTTR-A-TB 12FMN-SMT-A-TF 11.0( .433) 14.0( .551) 15.0( .591) 13.0( .512) 1,000 2,000 13 13FMN-BMT-A-TF 13FMN-BMTR-A-TB 13FMN-BMTTN-A-TF 13FMN-BMTTR-A-TB 13FMN-SMT-A-TF 12.0( .472) 15.0( .591) 16.0( .630) 14.0( .551) 1,000 2,000 14 14FMN-BMT-A-TF 14FMN-BMTR-A-TB 14FMN-BMTTN-A-TF 14FMN-BMTTR-A-TB 14FMN-SMT-A-TF 13.0( .512) 16.0( .630) 17.0( .669) 15.0( .591) 1,000 2,000 15 15FMN-BMT-A-TF 15FMN-BMTR-A-TB 15FMN-BMTTN-A-TF 15FMN-BMTTR-A-TB 15FMN-SMT-A-TF 14.0( .551) 17.0( .669) 18.0( .709) 16.0( .630) 1,000 2,000 16 16FMN-BMT-A-TF 16FMN-BMTR-A-TB 16FMN-BMTTN-A-TF 16FMN-BMTTR-A-TB 16FMN-SMT-A-TF 15.0( .591) 18.0( .709) 19.0( .748) 17.0( .669) 1,000 2,000 17 17FMN-BMT-A-TF 17FMN-BMTR-A-TB 17FMN-BMTTN-A-TF 17FMN-BMTTR-A-TB 17FMN-SMT-A-TF 16.0( .630) 19.0( .748) 20.0( .787) 18.0( .709) 1,000 2,000 18 18FMN-BMT-A-TF 18FMN-BMTR-A-TB 18FMN-BMTTN-A-TF 18FMN-BMTTR-A-TB 18FMN-SMT-A-TF 17.0( .669) 20.0( .787) 21.0( .827) 19.0( .748) 1,000 2,000 19 19FMN-BMT-A-TF 19FMN-BMTR-A-TB 19FMN-BMTTN-A-TF 19FMN-BMTTR-A-TB 19FMN-SMT-A-TF 18.0( .709) 21.0( .827) 22.0( .866) 20.0( .787) 1,000 2,000 20 20FMN-BMT-A-TF 20FMN-BMTR-A-TB 20FMN-BMTTN-A-TF 20FMN-BMTTR-A-TB 20FMN-SMT-A-TF 19.0( .748) 22.0( .866) 23.0( .906) 21.0( .827) 1,000 2,000 21 21FMN-BMT-A-TF 21FMN-BMTR-A-TB 21FMN-BMTTN-A-TF 21FMN-BMTTR-A-TB 21FMN-SMT-A-TF 20.0( .787) 23.0( .906) 24.0( .945) 22.0( .866) 1,000 2,000 22 22FMN-BMT-A-TF 22FMN-BMTR-A-TB 22FMN-BMTTN-A-TF 22FMN-BMTTR-A-TB 22FMN-SMT-A-TF 21.0( .827) 24.0( .945) 25.0( .984) 23.0( .906) 1,000 2,000 23 23FMN-BMT-A-TF 23FMN-BMTR-A-TB 23FMN-BMTTN-A-TF 23FMN-BMTTR-A-TB 23FMN-SMT-A-TF 22.0( .866) 25.0( .984) 26.0(1.024) 24.0( .945) 1,000 2,000 24 24FMN-BMT-A-TF 24FMN-BMTR-A-TB 24FMN-BMTTN-A-TF 24FMN-BMTTR-A-TB 24FMN-SMT-A-TF 23.0( .906) 26.0(1.024) 27.0(1.063) 25.0( .984) 1,000 2,000 25 25FMN-BMT-A-TF 25FMN-BMTR-A-TB 25FMN-BMTTN-A-TF 25FMN-BMTTR-A-TB 25FMN-SMT-A-TF 24.0( .945) 27.0(1.063) 28.0(1.102) 26.0(1.024) 1,000 2,000 26 26FMN-BMT-A-TF 26FMN-BMTR-A-TB 26FMN-BMTTN-A-TF 26FMN-BMTTR-A-TB 26FMN-SMT-A-TF 25.0( .984) 28.0(1.102) 29.0(1.142) 27.0(1.063) 1,000 2,000 27 27FMN-BMT-A-TF 27FMN-BMTR-A-TB 27FMN-BMTTN-A-TF 27FMN-BMTTR-A-TB 27FMN-SMT-A-TF 26.0(1.024) 29.0(1.142) 30.0(1.181) 28.0(1.102) 1,000 2,000 28 28FMN-BMT-A-TF 28FMN-BMTR-A-TB 28FMN-BMTTN-A-TF 28FMN-BMTTR-A-TB 28FMN-SMT-A-TF 27.0(1.063) 30.0(1.181) 31.0(1.220) 29.0(1.142) 1,000 2,000 29 29FMN-BMT-A-TF 29FMN-BMTR-A-TB 29FMN-BMTTN-A-TF 29FMN-BMTTR-A-TB 29FMN-SMT-A-TF 28.0(1.102) 31.0(1.220) 32.0(1.260) 30.0(1.181) 1,000 2,000 30 30FMN-BMT-A-TF 30FMN-BMTR-A-TB 30FMN-BMTTN-A-TF 30FMN-BMTTR-A-TB 30FMN-SMT-A-TF 29.0(1.142) 32.0(1.260) 33.0(1.299) 31.0(1.220) 1,000 2,000 31 31FMN-BMT-A-TF 31FMN-BMTR-A-TB 31FMN-BMTTN-A-TF 31FMN-BMTTR-A-TB 31FMN-SMT-A-TF 30.0(1.181) 33.0(1.299) 34.0(1.339) 32.0(1.260) 1,000 2,000 32 32FMN-BMT-A-TF 32FMN-BMTR-A-TB 32FMN-BMTTN-A-TF 32FMN-BMTTR-A-TB 32FMN-SMT-A-TF 31.0(1.220) 34.0(1.339) 35.0(1.378) 33.0(1.299) 1,000 2,000 33 33FMN-BMT-A-TF 33FMN-BMTR-A-TB 33FMN-BMTTN-A-TF 33FMN-BMTTR-A-TB 33FMN-SMT-A-TF 32.0(1.260) 35.0(1.378) 36.0(1.417) 34.0(1.339) 1,000 2,000 34 34FMN-BMT-A-TF 34FMN-BMTR-A-TB 34FMN-BMTTN-A-TF 34FMN-BMTTR-A-TB 34FMN-SMT-A-TF 33.0(1.299) 36.0(1.417) 37.0(1.457) 35.0(1.378) 1,000 2,000 35 35FMN-BMT-A-TF 35FMN-BMTR-A-TB 35FMN-BMTTN-A-TF 35FMN-BMTTR-A-TB 35FMN-SMT-A-TF 34.0(1.339) 37.0(1.457) 38.0(1.496) 36.0(1.417) 1,000 2,000 36 36FMN-BMT-A-TF 36FMN-BMTR-A-TB 36FMN-BMTTN-A-TF 36FMN-BMTTR-A-TB 36FMN-SMT-A-TF 35.0(1.378) 38.0(1.496) 39.0(1.535) 37.0(1.457) 1,000 2,000 37 37FMN-BMT-A-TF 37FMN-BMTR-A-TB 37FMN-BMTTN-A-TF 37FMN-BMTTR-A-TB 37FMN-SMT-A-TF 36.0(1.417) 39.0(1.535) 40.0(1.575) 38.0(1.496) 1,000 2,000 38 38FMN-BMT-A-TF 38FMN-BMTR-A-TB 38FMN-BMTTN-A-TF 38FMN-BMTTR-A-TB 38FMN-SMT-A-TF 37.0(1.457) 40.0(1.575) 41.0(1.614) 39.0(1.535) 1,000 2,000 39 39FMN-BMT-A-TF 39FMN-BMTR-A-TB 39FMN-BMTTN-A-TF 39FMN-BMTTR-A-TB 39FMN-SMT-A-TF 38.0(1.496) 41.0(1.614) 42.0(1.654) 40.0(1.575) 1,000 2,000 40 40FMN-BMT-A-TF 40FMN-BMTR-A-TB 40FMN-BMTTN-A-TF 40FMN-BMTTR-A-TB 40FMN-SMT-A-TF 39.0(1.535) 42.0(1.654) 43.0(1.693) 41.0(1.614) 1,000 2,000 Material and Finish Contact: Phosphor bronze, copper-undercoated, tin/lead-plated Housing: Modified 6T nylon, UL94V-0, black Solder tab: Brass, copper-undercoated, tin/lead plated Note: 1. The products listed above are supplied on embossed tape. 2. Contact JST for the top entry type headers with suction cap. 535 FMN CONNECTOR SMT type PC board layout (viewed from component side) --------------------------- 0.6 (.024) 1.7 1.8 1.9 (.067) (.071) (.075) Normal type Circuit No.1 1.00.05 (.039.002) Circuit No.1 1.00.05(.039.002) 1.00.05 (.039.002) Circuit No.1 1.2 (.047) 0.6 (.024) <Staggered> 0.7(.028) Reverse type 1.2(.047) 0.6 (.024) Side entry type 1.7 1.8 1.9 (.067) (.071) (.075) 1.8 (.071) 1.9 (.075) 0.2 (.008) Circuit No.1 0.7 (.028) 0.6 (.024) 1.2 (.047) 0.7 (.028) 0.7 (.028) <In-line> 0.2 (.008) 1.8 (.071) 2.7(.106) 4.4(.173) Top entry type 1.00.05(.039.002) 0.6 (.024) Circuit No. 1 1.7 (.067) 1.2 (.047) 3.0(.118) 5.1(.201) 1.8 (.071) 0.2 (.008) 1.2 1.2 (.047) (.047) 1.00.05 (.039.002) Note: 1. Tolerances are non-cumulative: 0.05mm(.002" ) for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. SMT type Assembly layout (viewed from component side) --------------------------- Top entry type Side entry type Contact point 5.15(.203) Contact point 536 3.05(.120) 5.1(.201) FMN CONNECTOR Taping specifications ------------------------------------------------------ Feeding direction Feeding direction Top entry type: 330 2.0(12.992.079)dia. Side entry type: 380 2.0(14.961.079)dia. 2.00.5 (.079.020) (16 to 40 circuits) 12.0 0.1(.472 .004) 1.550.05(.061 .002)dia. 1.55 0.05(.061.002)dia. Feeding direction F0.1(.004) W 0.3(.012) F0.1 (.004) 1.75 0.1 (.069.004) 4.0 0.1 2.0 0.1 (.157.004) (.079 .004) 120.1 (.472.004) 12.0 0.1(.472 .004) Top entry type Circuits Carrier tape Cover tape Side entry type Taping dimensions mm(in.) F Cover tape 1.750.1 (.069 .004) (15 to 40 circuits) Side entry type (4 to 14 circuits) Feeding direction W S 120.1 (.472.004) 2.00.1 4.00.1 (.157.004) (.079.004) Carrier tape F 1.550.05 (.061.002)dia. F0.1 (.004) Feeding direction 2.00.1 (.079 .004) W 0.3(.012) 4.00.1 (.157.004) 1.55 0.05(.061.002)dia. 4.0 0.1 2.0 0.1 (.157.004) (.079 .004) 1.75 0.1 (.069.004) Feeding direction W 0.3(.012) W1 1.750.1 (.069 .004) Top entry type (4 to 15 circuits) Leader part 100(3.937)min. The end part 160(6.299)min. Connector mounting part 400(15.748)min. S0.1(.004) 13(.512)dia. Cover tape leader Carrier tape S W W1 Q'ty / reel Circuits Taping dimensions mm(in.) F S W W1 Q'ty / reel 7.5( .295) - 16.0( .630) 17.5( .689) 1,000 4 to 6 7.5( .295) - 16.0( .630) 17.5( .689) 2,000 8 to 15 11.5( .453) - 24.0( .945) 25.5(1.004) 1,000 7 to 14 11.5( .453) - 24.0( .945) 25.5(1.004) 2,000 16 to 19 14.2( .559) 28.4(1.118) 32.0(1.260) 33.5(1.319) 1,000 15 to 18 14.2( .559) 28.4(1.118) 32.0(1.260) 33.5(1.319) 2,000 20 to 31 20.2( .795) 40.4(1.591) 44.0(1.732) 45.5(1.791) 1,000 19 to 30 20.2( .795) 40.4(1.591) 44.0(1.732) 45.5(1.791) 2,000 32 to 40 26.2(1.031) 52.4(2.063) 56.0(2.205) 57.5(2.264) 1,000 31 to 40 26.2(1.031) 52.4(2.063) 56.0(2.205) 57.5(2.264) 2,000 4 to 7 Note: 1. Specifications conform to JIS C 0806. The tape width, connector recess dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded. 2. Specifications are subject to change without prior notice. Lead section dimensions of FFC--------------------------------------------- [1.0(.039)x(Number of circuits +1)]0.12(.005) [1.0(.039)x(Number of circuits -1)]0.1(.004) 0.30.05 (.012.002) 1.00.1 (.039 .004) 0.70.1 (.028.004) 1.0 0.15 (.039 .006) 3.7(.146)min. 1.00.15 (.039.006) 537