531
FMN CONNECTOR
Connectors for FFC
1.0mm
(.039") pitch
Emboss Tape
Through-hole type
SMT type
Features––––––––––––––––––––––––
• Compact
3.0mm(.118") high
<
side entry type
>
and 5.1mm(.201")
<
top
entry type
>
.
• Low insertion force
There are no slides or levers to operate on this reduced
insertion force connector. It requires 1/2 the insertion force of
JST's conventional FFC connector, but retains stable contact
performance when subjected to environmental and mechanical
stresses.
• Both through-hole and SMT types are available
SMT type connectors have heat-resistant housings so that
solder reflow is possible. They also have solder tabs for extra
strength.
• Embossed tape for automatic mounting
The SMT type FMN connector is supplied in embossed tape
packaging, for mounting by automatic placement machines.
Specifications –––––––––––––––––––
Current rating: 0.5A DC
Voltage rating: 50V DC
Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
Contact resistance: Initial value/30m max.
After environmental testing/50m max.
Insulation resistance: 500M min.
Withstanding voltage: 500V AC/minute
Applicable FFC: Lead pitch /1.0mm(.039")
Lead width /0.7mm(.028")
Mating part thickness /
0.30 ±0.05mm(.012"±.002")
Applicable PC board thickness: 1.6mm(.063")
<Note
>FFC
to be actually used should be checked for applicability.
* Contact JST if Lead-Free product is required.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0Recognized E60389
1Certified LR20812
532
A
C
B
Circuit No. 1
0.4(.016)
1.0(.039) 2.0
(.079)
2.65
(.104)
5.1(.201)
3.0
(.118) 3.0
(.118)
<Note>
A
C
B
Circuit No. 1
0.4(.016)
1.0(.039) 2.0
(.079)
2.65
(.104)
5.1(.201)
6.5(.256)
3.0
(.118) 3.0
(.118)
<Note>
A
B
0.4(.016)
1.0(.039) 2.0
(.079) 0.65
(.026)
5.1
(.201)
3.0
(.118)
Circuit No. 1
3.0
(.118)
<Note>
Through-hole type Connector ––––––––––––––––––––––––––––––––––––––––––––––
Top entry type Side entry type
Side entry type
with stop
Circuits
Q'ty /
box
04FMN-BTK-A
05FMN-BTK-A
06FMN-BTK-A
07FMN-BTK-A
08FMN-BTK-A
09FMN-BTK-A
10FMN-BTK-A
11FMN-BTK-A
12FMN-BTK-A
13FMN-BTK-A
14FMN-BTK-A
15FMN-BTK-A
16FMN-BTK-A
17FMN-BTK-A
18FMN-BTK-A
19FMN-BTK-A
20FMN-BTK-A
21FMN-BTK-A
22FMN-BTK-A
23FMN-BTK-A
24FMN-BTK-A
25FMN-BTK-A
26FMN-BTK-A
27FMN-BTK-A
28FMN-BTK-A
29FMN-BTK-A
30FMN-BTK-A
31FMN-BTK-A
32FMN-BTK-A
33FMN-BTK-A
34FMN-BTK-A
35FMN-BTK-A
36FMN-BTK-A
37FMN-BTK-A
38FMN-BTK-A
39FMN-BTK-A
40FMN-BTK-A
04FMN-BTRK-A
05FMN-BTRK-A
06FMN-BTRK-A
07FMN-BTRK-A
08FMN-BTRK-A
09FMN-BTRK-A
10FMN-BTRK-A
11FMN-BTRK-A
12FMN-BTRK-A
13FMN-BTRK-A
14FMN-BTRK-A
15FMN-BTRK-A
16FMN-BTRK-A
17FMN-BTRK-A
18FMN-BTRK-A
19FMN-BTRK-A
20FMN-BTRK-A
21FMN-BTRK-A
22FMN-BTRK-A
23FMN-BTRK-A
24FMN-BTRK-A
25FMN-BTRK-A
26FMN-BTRK-A
27FMN-BTRK-A
28FMN-BTRK-A
29FMN-BTRK-A
30FMN-BTRK-A
31FMN-BTRK-A
32FMN-BTRK-A
33FMN-BTRK-A
34FMN-BTRK-A
35FMN-BTRK-A
36FMN-BTRK-A
37FMN-BTRK-A
38FMN-BTRK-A
39FMN-BTRK-A
40FMN-BTRK-A
04FMN-STK-A
05FMN-STK-A
06FMN-STK-A
07FMN-STK-A
08FMN-STK-A
09FMN-STK-A
10FMN-STK-A
11FMN-STK-A
12FMN-STK-A
13FMN-STK-A
14FMN-STK-A
15FMN-STK-A
16FMN-STK-A
17FMN-STK-A
18FMN-STK-A
19FMN-STK-A
20FMN-STK-A
21FMN-STK-A
22FMN-STK-A
23FMN-STK-A
24FMN-STK-A
25FMN-STK-A
26FMN-STK-A
27FMN-STK-A
28FMN-STK-A
29FMN-STK-A
30FMN-STK-A
31FMN-STK-A
32FMN-STK-A
33FMN-STK-A
34FMN-STK-A
35FMN-STK-A
36FMN-STK-A
37FMN-STK-A
38FMN-STK-A
39FMN-STK-A
40FMN-STK-A
04FMN-STRK-A
05FMN-STRK-A
06FMN-STRK-A
07FMN-STRK-A
08FMN-STRK-A
09FMN-STRK-A
10FMN-STRK-A
11FMN-STRK-A
12FMN-STRK-A
13FMN-STRK-A
14FMN-STRK-A
15FMN-STRK-A
16FMN-STRK-A
17FMN-STRK-A
18FMN-STRK-A
19FMN-STRK-A
20FMN-STRK-A
21FMN-STRK-A
22FMN-STRK-A
23FMN-STRK-A
24FMN-STRK-A
25FMN-STRK-A
26FMN-STRK-A
27FMN-STRK-A
28FMN-STRK-A
29FMN-STRK-A
30FMN-STRK-A
31FMN-STRK-A
32FMN-STRK-A
33FMN-STRK-A
34FMN-STRK-A
35FMN-STRK-A
36FMN-STRK-A
37FMN-STRK-A
38FMN-STRK-A
39FMN-STRK-A
40FMN-STRK-A
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
3.0( .118)
4.0( .157)
5.0( .197)
6.0( .236)
7.0( .276)
8.0( .315)
9.0( .354)
10.0( .394)
11.0( .433)
12.0( .472)
13.0( .512)
14.0( .551)
15.0( .591)
16.0( .630)
17.0( .669)
18.0( .709)
19.0( .748)
20.0( .787)
21.0( .827)
22.0( .866)
23.0( .906)
24.0( .945)
25.0( .984)
26.0(1.024)
27.0(1.063)
28.0(1.102)
29.0(1.142)
30.0(1.181)
31.0(1.220)
32.0(1.260)
33.0(1.299)
34.0(1.339)
35.0(1.378)
36.0(1.417)
37.0(1.457)
38.0(1.496)
39.0(1.535)
6.0( .236)
7.0( .276)
8.0( .315)
9.0( .354)
10.0( .394)
11.0( .433)
12.0( .472)
13.0( .512)
14.0( .551)
15.0( .591)
16.0( .630)
17.0( .669)
18.0( .709)
19.0( .748)
20.0( .787)
21.0( .827)
22.0( .866)
23.0( .906)
24.0( .945)
25.0( .984)
26.0(1.024)
27.0(1.063)
28.0(1.102)
29.0(1.142)
30.0(1.181)
31.0(1.220)
32.0(1.260)
33.0(1.299)
34.0(1.339)
35.0(1.378)
36.0(1.417)
37.0(1.457)
38.0(1.496)
39.0(1.535)
40.0(1.575)
41.0(1.614)
42.0(1.654)
5.0( .197)
6.0( .236)
7.0( .276)
8.0( .315)
9.0( .354)
10.0( .394)
11.0( .433)
12.0( .472)
13.0( .512)
14.0( .551)
15.0( .591)
16.0( .630)
17.0( .669)
18.0( .709)
19.0( .748)
20.0( .787)
21.0( .827)
22.0( .866)
23.0( .906)
24.0( .945)
25.0( .984)
26.0(1.024)
27.0(1.063)
28.0(1.102)
29.0(1.142)
30.0(1.181)
31.0(1.220)
32.0(1.260)
33.0(1.299)
34.0(1.339)
35.0(1.378)
36.0(1.417)
37.0(1.457)
38.0(1.496)
39.0(1.535)
40.0(1.575)
41.0(1.614)
2,160
1,860
1,620
1,440
1,260
1,140
1,080
960
900
840
780
720
720
660
600
600
540
540
540
480
480
480
420
420
420
420
360
360
360
360
360
300
300
300
300
300
300
3,600
3,100
2,700
2,400
2,100
1,900
1,800
1,600
1,500
1,400
1,300
1,200
1,200
1,100
1,000
1,000
900
900
900
800
800
800
700
700
700
700
600
600
600
600
600
500
500
500
500
500
500
Model No.
Top entry type Side entry type
Side entry type with stop
Side entry
type
2,520
2,170
1,890
1,680
1,470
1,330
1,260
1,120
1,050
980
910
840
840
770
700
700
630
630
630
560
560
560
490
490
490
490
420
420
420
420
420
350
350
350
350
350
350
Side entry
type with stop
Top entry
type
Dimensions mm(in.)
Normal type Reverse type Normal type Reverse type
04FMN-SSTK-A
05FMN-SSTK-A
06FMN-SSTK-A
07FMN-SSTK-A
08FMN-SSTK-A
09FMN-SSTK-A
10FMN-SSTK-A
11FMN-SSTK-A
12FMN-SSTK-A
13FMN-SSTK-A
14FMN-SSTK-A
15FMN-SSTK-A
16FMN-SSTK-A
17FMN-SSTK-A
18FMN-SSTK-A
19FMN-SSTK-A
20FMN-SSTK-A
21FMN-SSTK-A
22FMN-SSTK-A
23FMN-SSTK-A
24FMN-SSTK-A
25FMN-SSTK-A
26FMN-SSTK-A
27FMN-SSTK-A
28FMN-SSTK-A
29FMN-SSTK-A
30FMN-SSTK-A
31FMN-SSTK-A
32FMN-SSTK-A
33FMN-SSTK-A
34FMN-SSTK-A
35FMN-SSTK-A
36FMN-SSTK-A
37FMN-SSTK-A
38FMN-SSTK-A
39FMN-SSTK-A
40FMN-SSTK-A
04FMN-SSTRK-A
05FMN-SSTRK-A
06FMN-SSTRK-A
07FMN-SSTRK-A
08FMN-SSTRK-A
09FMN-SSTRK-A
10FMN-SSTRK-A
11FMN-SSTRK-A
12FMN-SSTRK-A
13FMN-SSTRK-A
14FMN-SSTRK-A
15FMN-SSTRK-A
16FMN-SSTRK-A
17FMN-SSTRK-A
18FMN-SSTRK-A
19FMN-SSTRK-A
20FMN-SSTRK-A
21FMN-SSTRK-A
22FMN-SSTRK-A
23FMN-SSTRK-A
24FMN-SSTRK-A
25FMN-SSTRK-A
26FMN-SSTRK-A
27FMN-SSTRK-A
28FMN-SSTRK-A
29FMN-SSTRK-A
30FMN-SSTRK-A
31FMN-SSTRK-A
32FMN-SSTRK-A
33FMN-SSTRK-A
34FMN-SSTRK-A
35FMN-SSTRK-A
36FMN-SSTRK-A
37FMN-SSTRK-A
38FMN-SSTRK-A
39FMN-SSTRK-A
40FMN-SSTRK-A
Normal type Reverse type ABC
Material and Finish
Contact: Phosphor bronze, copper-undercoated, tin/lead-plated
Housing: 4 to 22 circuits/PBT, UL94V-0
23 to 40 circuits/Modified 6T nylon, UL94V-0
Normal type...gray Reverse type...black
<Note> Normal type: The solder tail for cricuit No.1 contact is positioned in front.
Reverse type: The solder tail for cricuit No.1 contact is positioned behind.
FMN CONNECTOR
533
FMN CONNECTOR
0.65(.026)
5.1(.201)
3.0(.118) Contact
point
5.1(.201)
3.0(.118)
2.65(.104)
Contact
point
Through-hole type PC board layout (viewed from component side) ––––––––––––––––––––
Through-hole type Assembly layout –––––––––––––––––––––––––––––––––––––––––
2.0±0.05
(.079±.002)
2.0±0.05
(.079±.002)
1.0±0.05
(.039±.002)
1.0±0.05
(.039±.002)
Even number
circuits
Odd number
circuits
0.75±0.05
(.030±.002)
Circuit No.1
2.0±0.05
(.079±.002)
0.75±0.05
(.030±.002)
Circuit No.1
Even number
circuits
Odd number
circuits
2.0±0.05
(.079±.002)
Top entry type
Top entry type Side entry type
2.0±0.05
(.079±.002)
Odd number
circuits
Even number
circuits
Circuit No.1 (.030±.002)dia.
0.75±0.05
2.0±0.05
(.079±.002)
Odd number
circuits
Even number
circuits
Circuit No.1
(.030±.002)dia.
0.75±0.05
1.0±0.05
(.039±.002)
2.0±0.05
(.079±.002)
1.0±0.05
(.039±.002)
2.0±0.05
(.079±.002)
Side entry type
<Normal type> <Normal type>
<Reverse type>
<Reverse type>
Note:
1. Tolerances are non-cumulative:
±
0.05mm(
±
.002" ) for all centers.
2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline.
Contact JST for details.
534
FMN CONNECTOR
B
1.5
(.059)
3.0(.118)
Circuit No. 1
5.1(.201)
1.0(.039) 0.7(.028)0.7(.028)
1.0(.039)
A
C
B
Circuit No.1
0.4(.016)
3.0(.118)
0.7(.028)
5.1(.201)
0.7(.028)
B
0.4(.016)Circuit No.1
C
A
B
1.5
(.059)
5.1(.201)
3.0(.118)
1.0(.039) 0.7(.028)
0.2(.008) 1.5
(.059)
Circuit No. 1
1.0(.039)0.4(.016) A
C
B
Circuit No.1
1.0(.039)
A
C
B
Circuit No.1
0.4(.016)
1.0(.039)
A
C
B
Circuit No.1
0.4(.016)
SMT type Connector–––––––––––––––––––––––––––––––––––––––––––––––––––––––
Top entry type
Side entry type
<In-line> <Staggered>
Normal type
Reverse type
535
FMN CONNECTOR
Cir-
cuits
Model No.
Normal type
Dimensions mm(in.)
AB
Q'ty / reel
Material and Finish
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
04FMN-BMT-A-TF
05FMN-BMT-A-TF
06FMN-BMT-A-TF
07FMN-BMT-A-TF
08FMN-BMT-A-TF
09FMN-BMT-A-TF
10FMN-BMT-A-TF
11FMN-BMT-A-TF
12FMN-BMT-A-TF
13FMN-BMT-A-TF
14FMN-BMT-A-TF
15FMN-BMT-A-TF
16FMN-BMT-A-TF
17FMN-BMT-A-TF
18FMN-BMT-A-TF
19FMN-BMT-A-TF
20FMN-BMT-A-TF
21FMN-BMT-A-TF
22FMN-BMT-A-TF
23FMN-BMT-A-TF
24FMN-BMT-A-TF
25FMN-BMT-A-TF
26FMN-BMT-A-TF
27FMN-BMT-A-TF
28FMN-BMT-A-TF
29FMN-BMT-A-TF
30FMN-BMT-A-TF
31FMN-BMT-A-TF
32FMN-BMT-A-TF
33FMN-BMT-A-TF
34FMN-BMT-A-TF
35FMN-BMT-A-TF
36FMN-BMT-A-TF
37FMN-BMT-A-TF
38FMN-BMT-A-TF
39FMN-BMT-A-TF
40FMN-BMT-A-TF
3.0( .118)
4.0( .157)
5.0( .197)
6.0( .236)
7.0( .276)
8.0( .315)
9.0( .354)
10.0( .394)
11.0( .433)
12.0( .472)
13.0( .512)
14.0( .551)
15.0( .591)
16.0( .630)
17.0( .669)
18.0( .709)
19.0( .748)
20.0( .787)
21.0( .827)
22.0( .866)
23.0( .906)
24.0( .945)
25.0( .984)
26.0(1.024)
27.0(1.063)
28.0(1.102)
29.0(1.142)
30.0(1.181)
31.0(1.220)
32.0(1.260)
33.0(1.299)
34.0(1.339)
35.0(1.378)
36.0(1.417)
37.0(1.457)
38.0(1.496)
39.0(1.535)
6.0( .236)
7.0( .276)
8.0( .315)
9.0( .354)
10.0( .394)
11.0( .433)
12.0( .472)
13.0( .512)
14.0( .551)
15.0( .591)
16.0( .630)
17.0( .669)
18.0( .709)
19.0( .748)
20.0( .787)
21.0( .827)
22.0( .866)
23.0( .906)
24.0( .945)
25.0( .984)
26.0(1.024)
27.0(1.063)
28.0(1.102)
29.0(1.142)
30.0(1.181)
31.0(1.220)
32.0(1.260)
33.0(1.299)
34.0(1.339)
35.0(1.378)
36.0(1.417)
37.0(1.457)
38.0(1.496)
39.0(1.535)
40.0(1.575)
41.0(1.614)
42.0(1.654)
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Contact: Phosphor bronze, copper-undercoated, tin/lead-plated
Housing: Modified 6T nylon, UL94V-0, black
Solder tab: Brass, copper-undercoated, tin/lead plated
Top entry
type 5.0( .197)
6.0( .236)
7.0( .276)
8.0( .315)
9.0( .354)
10.0( .394)
11.0( .433)
12.0( .472)
13.0( .512)
14.0( .551)
15.0( .591)
16.0( .630)
17.0( .669)
18.0( .709)
19.0( .748)
20.0( .787)
21.0( .827)
22.0( .866)
23.0( .906)
24.0( .945)
25.0( .984)
26.0(1.024)
27.0(1.063)
28.0(1.102)
29.0(1.142)
30.0(1.181)
31.0(1.220)
32.0(1.260)
33.0(1.299)
34.0(1.339)
35.0(1.378)
36.0(1.417)
37.0(1.457)
38.0(1.496)
39.0(1.535)
40.0(1.575)
41.0(1.614)
7.0( .276)
8.0( .315)
9.0( .354)
10.0( .394)
11.0( .433)
12.0( .472)
13.0( .512)
14.0( .551)
15.0( .591)
16.0( .630)
17.0( .669)
18.0( .709)
19.0( .748)
20.0( .787)
21.0( .827)
22.0( .866)
23.0( .906)
24.0( .945)
25.0( .984)
26.0(1.024)
27.0(1.063)
28.0(1.102)
29.0(1.142)
30.0(1.181)
31.0(1.220)
32.0(1.260)
33.0(1.299)
34.0(1.339)
35.0(1.378)
36.0(1.417)
37.0(1.457)
38.0(1.496)
39.0(1.535)
40.0(1.575)
41.0(1.614)
42.0(1.654)
43.0(1.693)
Reverse type
04FMN-BMTR-A-TB
05FMN-BMTR-A-TB
06FMN-BMTR-A-TB
07FMN-BMTR-A-TB
08FMN-BMTR-A-TB
09FMN-BMTR-A-TB
10FMN-BMTR-A-TB
11FMN-BMTR-A-TB
12FMN-BMTR-A-TB
13FMN-BMTR-A-TB
14FMN-BMTR-A-TB
15FMN-BMTR-A-TB
16FMN-BMTR-A-TB
17FMN-BMTR-A-TB
18FMN-BMTR-A-TB
19FMN-BMTR-A-TB
20FMN-BMTR-A-TB
21FMN-BMTR-A-TB
22FMN-BMTR-A-TB
23FMN-BMTR-A-TB
24FMN-BMTR-A-TB
25FMN-BMTR-A-TB
26FMN-BMTR-A-TB
27FMN-BMTR-A-TB
28FMN-BMTR-A-TB
29FMN-BMTR-A-TB
30FMN-BMTR-A-TB
31FMN-BMTR-A-TB
32FMN-BMTR-A-TB
33FMN-BMTR-A-TB
34FMN-BMTR-A-TB
35FMN-BMTR-A-TB
36FMN-BMTR-A-TB
37FMN-BMTR-A-TB
38FMN-BMTR-A-TB
39FMN-BMTR-A-TB
40FMN-BMTR-A-TB
Normal type
04FMN-BMTTN-A-TF
05FMN-BMTTN-A-TF
06FMN-BMTTN-A-TF
07FMN-BMTTN-A-TF
08FMN-BMTTN-A-TF
09FMN-BMTTN-A-TF
10FMN-BMTTN-A-TF
11FMN-BMTTN-A-TF
12FMN-BMTTN-A-TF
13FMN-BMTTN-A-TF
14FMN-BMTTN-A-TF
15FMN-BMTTN-A-TF
16FMN-BMTTN-A-TF
17FMN-BMTTN-A-TF
18FMN-BMTTN-A-TF
19FMN-BMTTN-A-TF
20FMN-BMTTN-A-TF
21FMN-BMTTN-A-TF
22FMN-BMTTN-A-TF
23FMN-BMTTN-A-TF
24FMN-BMTTN-A-TF
25FMN-BMTTN-A-TF
26FMN-BMTTN-A-TF
27FMN-BMTTN-A-TF
28FMN-BMTTN-A-TF
29FMN-BMTTN-A-TF
30FMN-BMTTN-A-TF
31FMN-BMTTN-A-TF
32FMN-BMTTN-A-TF
33FMN-BMTTN-A-TF
34FMN-BMTTN-A-TF
35FMN-BMTTN-A-TF
36FMN-BMTTN-A-TF
37FMN-BMTTN-A-TF
38FMN-BMTTN-A-TF
39FMN-BMTTN-A-TF
40FMN-BMTTN-A-TF
Reverse type
04FMN-BMTTR-A-TB
05FMN-BMTTR-A-TB
06FMN-BMTTR-A-TB
07FMN-BMTTR-A-TB
08FMN-BMTTR-A-TB
09FMN-BMTTR-A-TB
10FMN-BMTTR-A-TB
11FMN-BMTTR-A-TB
12FMN-BMTTR-A-TB
13FMN-BMTTR-A-TB
14FMN-BMTTR-A-TB
15FMN-BMTTR-A-TB
16FMN-BMTTR-A-TB
17FMN-BMTTR-A-TB
18FMN-BMTTR-A-TB
19FMN-BMTTR-A-TB
20FMN-BMTTR-A-TB
21FMN-BMTTR-A-TB
22FMN-BMTTR-A-TB
23FMN-BMTTR-A-TB
24FMN-BMTTR-A-TB
25FMN-BMTTR-A-TB
26FMN-BMTTR-A-TB
27FMN-BMTTR-A-TB
28FMN-BMTTR-A-TB
29FMN-BMTTR-A-TB
30FMN-BMTTR-A-TB
31FMN-BMTTR-A-TB
32FMN-BMTTR-A-TB
33FMN-BMTTR-A-TB
34FMN-BMTTR-A-TB
35FMN-BMTTR-A-TB
36FMN-BMTTR-A-TB
37FMN-BMTTR-A-TB
38FMN-BMTTR-A-TB
39FMN-BMTTR-A-TB
40FMN-BMTTR-A-TB
Single-row Staggered Side entry type C
Side entry
type
04FMN-SMT-A-TF
05FMN-SMT-A-TF
06FMN-SMT-A-TF
07FMN-SMT-A-TF
08FMN-SMT-A-TF
09FMN-SMT-A-TF
10FMN-SMT-A-TF
11FMN-SMT-A-TF
12FMN-SMT-A-TF
13FMN-SMT-A-TF
14FMN-SMT-A-TF
15FMN-SMT-A-TF
16FMN-SMT-A-TF
17FMN-SMT-A-TF
18FMN-SMT-A-TF
19FMN-SMT-A-TF
20FMN-SMT-A-TF
21FMN-SMT-A-TF
22FMN-SMT-A-TF
23FMN-SMT-A-TF
24FMN-SMT-A-TF
25FMN-SMT-A-TF
26FMN-SMT-A-TF
27FMN-SMT-A-TF
28FMN-SMT-A-TF
29FMN-SMT-A-TF
30FMN-SMT-A-TF
31FMN-SMT-A-TF
32FMN-SMT-A-TF
33FMN-SMT-A-TF
34FMN-SMT-A-TF
35FMN-SMT-A-TF
36FMN-SMT-A-TF
37FMN-SMT-A-TF
38FMN-SMT-A-TF
39FMN-SMT-A-TF
40FMN-SMT-A-TF
Top entry type
Top entry
type Side entry
type
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
Note:
1. The products listed above are supplied on embossed tape.
2. Contact JST for the top entry type headers with suction cap.
536
FMN CONNECTOR
1.2
(.047)
1.8
(.071)
0.6
(.024) 1.0±0.05
(.039±.002)
3.0(.118)
1.7
(.067)
0.2
(.008)
Circuit No. 1
5.1(.201)
1.2
(.047)
1.2
(.047)
0.6
(.024) 1.0±0.05
(.039±.002) Circuit No.1
0.7(.028)
1.8
(.071)
1.2(.047)
0.2
(.008)
1.9
(.075) 1.2
(.047)
1.2
(.047)
0.7
(.028)
0.2
(.008)
1.8
(.071)
2.7(.106)
4.4(.173)
0.6
(.024) 1.0±0.05
(.039±.002) Circuit No.1
0.7
(.028)
1.9
(.075)
1.8
(.071)
1.7
(.067)
1.0±0.05(.039±.002)
Circuit No.1
0.6
(.024)
0.7
(.028)
1.9
(.075)
1.8
(.071)
1.7
(.067)
1.0±0.05(.039±.002)
Circuit No.1
0.6
(.024)
SMT type PC board layout (viewed from component side) –––––––––––––––––––––––––––
Top entry type
Top entry type Side entry type
<In-line> <Staggered>
Side entry type
Note:
1. Tolerances are non-cumulative:
±
0.05mm(
±
.002" ) for all centers.
2. The dimensions above should serve as a guideline. Contact JST for details.
SMT type Assembly layout (viewed from component side) –––––––––––––––––––––––––––
Normal type
Reverse type
537
FMN CONNECTOR
Top entry type Side entry type
Taping specifications ––––––––––––––––––––––––––––––––––––––––––––––––––––––
Circuits Taping dimensions mm(in.)
FSWW1
Q'ty /
reel
4 to 7
8 to 15
16 to 19
20 to 31
32 to 40
7.5( .295)
11.5( .453)
14.2( .559)
20.2( .795)
26.2(1.031)
28.4(1.118)
40.4(1.591)
52.4(2.063)
16.0( .630)
24.0( .945)
32.0(1.260)
44.0(1.732)
56.0(2.205)
17.5( .689)
25.5(1.004)
33.5(1.319)
45.5(1.791)
57.5(2.264)
1,000
1,000
1,000
1,000
1,000
Circuits Taping dimensions mm(in.)
FSWW1
Q'ty /
reel
4 to 6
7 to 14
15 to 18
19 to 30
31 to 40
7.5( .295)
11.5( .453)
14.2( .559)
20.2( .795)
26.2(1.031)
28.4(1.118)
40.4(1.591)
52.4(2.063)
16.0( .630)
24.0( .945)
32.0(1.260)
44.0(1.732)
56.0(2.205)
17.5( .689)
25.5(1.004)
33.5(1.319)
45.5(1.791)
57.5(2.264)
2,000
2,000
2,000
2,000
2,000
Note: 1. Specifications conform to JIS C 0806. The tape width, connector recess dimensions, etc. are determined by the number of circuits and external shape of
the connector to be loaded.
2. Specifications are subject to change without prior notice.
Lead section dimensions of FFC–––––––––––––––––––––––––––––––––––––––––––––
3.7(.146)min.
0.3±0.05
(.012±.002) 0.7±0.1
(.028±.004)
1.0±0.1
(.039 ±.004)
[1.0(.039)x(Number of circuits +1)]±0.12(.005)
[1.0(.039)x(Number of circuits -1)]±0.1(.004)
1.0±0.15
(.039±.006) 1.0 ±0.15
(.039 ± .006)
Feeding direction
2.0±0.5
(.079±.020)
Top entry type: 330± 2.0(12.992±.079)dia.
Side entry type: 380± 2.0(14.961±.079)dia.
Feeding direction
13(.512)dia. W1
W± 0.3(.012)
F±0.1
(.004)
12±0.1
(.472±.004)
Feeding direction
Feeding direction
4.0 ±0.1
(.157±.004)
1.55 ±0.05(.061±.002)dia.
F1.75±0.1
(.069± .004)
S
W
Carrier tape
Cover tape
1.75 ± 0.1
(.069±.004)
1.55±0.05
(.061± .002)dia.
2.0±0.1
(.079 ±.004)
4.0±0.1
(.157±.004)
Feeding direction
Feeding direction
12.0± 0.1(.472 ±.004)
2.0± 0.1
(.079 ±.004)
Carrier tape
Cover tape
4.0 ±0.1
(.157±.004)
1.55±0.05(.061±.002)dia.
F±0.1(.004)
1.75±0.1
(.069± .004)
S±0.1(.004)
W± 0.3(.012)
2.0± 0.1
(.079 ±.004)
W± 0.3(.012)
F±0.1
(.004) 1.75 ± 0.1
(.069±.004)
1.55±0.05(.061± .002)dia.
4.0±0.1
(.157±.004) 2.0±0.1
(.079±.004)
12±0.1
(.472±.004)
Cover tape leader
Carrier tape
The end part
160(6.299)min.
Connector mounting part 400(15.748)min.
Leader part
100(3.937)min.
12.0± 0.1(.472 ±.004)
Top entry type (4 to 15 circuits) (16 to 40 circuits)
Side entry type (4 to 14 circuits) (15 to 40 circuits)