Technical Data Sheet
3.68*6.22mm Rectangular Legend LED Lamps
█
Features :
●
Choice of various viewing angles
●
Available on tape and reel.
●
Reliable and robust
●
Pb free
●
The product itself will remain within RoHS compliant version.
█
Descriptions :
●
The series is specially designed for
applications requiring higher
brightness
●
The led lamps are available with
different colors, intensities.
█
Applications :
●
TV set
●
Monitor
●
Telephone
●
Computer
1003SYGD/S530-E2/F14-9/S1339
AlGaInP Brilliant Yellow Green Green Diffused
EVERLIGHT ELECTRONICS CO.,LTD. http : //www.everlight.com Rev.: 2 Page: 1 of 6
Device Number : DLE-0001060 Prepared date: 2010/4/2 Prepared by: Li ming
DR000017047
1003SYGD/S530-E2/F14-9/S1339
Lens ColorPART NO. Material Emitted Color
Technical Data Sheet
3.68*6.22mm Rectangular Legend LED Lamps
Package Dimensions
Notes:
1. All dimensions are in millimetres
2. The height of flange must be less than 1.5mm(0.059").
3. Without special declared,the tolerance is ±0.25mm.
█ Absolute Maximum Ratings at Ta = 25℃
Parameter Symbol Rating Unit
Forward Current IF25 mA
Operating Temperature Topr -40 to +85 ℃
Storage Temperature Tstg -40 to +100 ℃
Tsol 260 ℃
Electrostatic Discharge ESD 2000 V
Power Dissipation Pd 60 mW
Peak Forward Current IF(Peak) 60 mA
Reverse Voltage VR5V
Note: *1:Soldering time ≦ 5 seconds.
EVERLIGHT ELECTRONICS CO.,LTD. http : //www.everlight.com Rev.: 2 Page: 2 of 6
Device Number : DLE-0001060 Prepared date: Prepared by: Li ming
1003SYGD/S530-E2/F14-9/S1339
Soldering Temperature
2010/4/2
Technical Data Sheet
3.68*6.22mm Rectangular Legend LED Lamps
Electro-Optical Characteristics (Ta=25℃)
Symbol Min. Typ. Max. Unit
VF I
F
=20 mA ／ 2.0 2.4 V
IR V
R
=5 V ／ ／ 10 μA
Iv I
F
=20 mA 6.3 12.5 ／ mcd
2θ1/2 I
F
=20 mA ／ 110 ／ deg
λp I
F
=20 mA ／ 575 ／ nm
λd I
F
=20 mA ／ 573 ／ nm
△λ I
F
=20 mA ／ 20 ／ nm
EVERLIGHT ELECTRONICS CO.,LTD. http : //www.everlight.com Rev.: 2 Page: 3 of 6
Device Number
:
DLE-0001060 Prepared date: Prepared by: Li ming
Forward Voltage
Reverse Current
Luminous Intensity
Viewing Angle
Dominant Wavelength
Spectrum Radiation
Bandwidth
2010/4/2
1003SYGD/S530-E2/F14-9/S1339
ConditionParameter
Peak Wavelength
Technical Data Sheet
3.68*6.22mm Rectangular Legend LED Lamps
█
Typical Electro-Optical Characteristic Curves:
EVERLIGHT ELECTRONICS CO.,LTD. http : //www.everlight.com Rev.: 2Page: 4 of 6
Device Number : DLE-0001060 Prepared date: 2010/4/2 Prepared by: Li ming
1003SYGD/S530-E2/F14-9/S1339
Technical Data Sheet
3.68*6.22mm Rectangular Legend LED Lamps
█
Reliability test items and conditions:
The reliability of products shall be satisfied with items listed below.
Confidence level：97%
LTPD：3%
NO Item Test Conditions Sample Size
Failure
Judgment
Criteria
1 Solder Heat TEMP : 260℃ ± 5 ℃ 76 PCS
H : +100℃ 15min
2 Temperature Cycle ∫ 5 min 76 PCS
L : -40℃ 15min
H : +100℃ 5min
3 Thermal Shock ∫ 10 sec 76 PCS
L : -10℃ 5min
4High Temperature
Storage TEMP : 100℃ 76 PCS
5Low Temperature
Storage TEMP : -40℃ 76 PCS
TEMP : 25℃
I
F
= 20mA
7High Temperature /
High Humidity 85℃ / 85% RH 76 PCS
Note：Ivt：To test Iv value of the chip before the reliablility test
Iv：The test value of the chip that has completed the reliablility test
U：U
pp
er S
p
ecification Limit
L： Lower Specification Limit
EVERLIGHT ELECTRONICS CO.
,L
http : //www.everlight.com Rev.: 2 Page: 5 of 6
Device Number : DLE-0001060 Prepared by: Li ming Prepared date: 2010/4/2
Test
Hours/Cycle
10 SEC
0/1
76 PCS
300 CYCLES
300 CYCLES
1000 HRS6 DC Operating Life
Ac/Re
0/1
0/1
0/1
0/1
0/1
0/1
Iv≦Ivt*0.5 or
Vf≧U or
Vf≦L
1000 HRS
1000 HRS
1000 HRS
1003SYGD/S530-E2/F14-9/S1339
Technical Data Sheet
3.68*6.22mm Rectangular Legend LED Lamps
Packing Quantity Specification
1.500PCS/1Bag，5Bags/1Box
2.10Boxes/1Carton
Label Form Specification
CPN: Customer's Production Number
P/N : Production Number
QTY: Packing Quantity
CAT: Ranks
HUE: Dominant Wavelength
REF: Reference
LOT No: Lot Number
Notes
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions
for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for
any damage resulting from use of the product which does not comply with the absolute
maximum ratings and the instructions included in these specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT corporatio
Please don＇t reproduce or cause anyone to reproduce them without EVERLIGHT＇sconsent.
EVERLIGHT ELECTRONICS CO.,LTD. http : //www.everlight.com Rev.: 2
Device Number : DLE-0001060 Prepared date: 2010/4/2 Prepared by:
Page: 6 of 6
Li ming
1003SYGD/S530-E2/F14-9/S1339
E
VERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C
http://www.everlight.com
RoHS
Pb
X
EVERLIGHT
1003SYGD/S530-E2/F14-9/S1339
Technical Data Sheet
3.68*6.22mm Rectangular Legend LED Lamps
Soldering
A rapid-rate process is not recommended for cooling the LEDs down from the peak temperature.
Although the recommended soldering conditions are specified in the above table, dip or handsoldering at the lowest possible
temperature is desirable for the LEDs.
Wave soldering parameter must be set and maintain according to recommended temperature and dwell time in the solder wave.
Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering.
Dip and hand soldering should not be done more than one time
After soldering the LEDs, the epoxy bulb should be protected from mechanical shock or vibration until the LEDs return to room
temperature.
Distance 3mm Min.(From solder joint to
e
p
ox
y
bulb
)
Distance 3mm Min. (From solder joint to
e
p
ox
y
bulb
)
Soldering time 3 sec Max. Bath temp. & time 260 Max., 5 sec Max
Temp. at tip of iron 300℃ Max. (30W Max.) Preheat temp. 100℃ Max. (60 sec Max.)
Recommended soldering conditions:
Hand Soldering DIP Soldering
1003SYGD/S530-E2/F14-9/S1339
Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to epoxy bulb, and
soldering beyond the base of the tie bar is recommended.
Prehead
laminar w ave
Fluxing
