General Purpose RT-iPower SCHRACK Power PCB Relay RT Inrush Power 1 pole 16A, 1 form A (NO) contact (AgSnO2 or W pre-make contact + AgSnO2) n Mono- or bistable coil n 5kV/10mm coil-contact n Reinforced insulation n Test tab (manual operator) optional for RTT3T bistable versions n WG version: product in accordance to IEC60335-1 n RTS3T: Electronic ballast UL508/NEMA 410 rated n RTSET: 8A Electronic ballast rated Typical applications LED lighting systems, filament and incandescent lamp loads, movement detectors, light sensors, intelligent wall sockets, motors (RTS3L), bus system actuators. n Zb Approvals VDE Cert. No. 40007571,UL E214025, cCSAus 1142018 Technical data of approved types on request. Contact Data RT.3T / RTSET RTS3L Contact arrangement 1 form A (NO) contact Rated voltage 250VAC Max. switching voltage 480VAC Rated current 16A Limiting continuous current 16A 20A Limiting making current, max. 20ms (incand. lamps) 165A peak 120A peak max. 200s 800A peak Breaking capacity max. 4000VA Contact material W (pre-make cont.) AgSnO2 +AgSnO2 Contact style pre-make contact single contact Frequency of operation, with/without load 360/3600h-1 Operate/release time max., DC coil 10/5ms Operate/Reset time max., bistable version 10/10ms Bounce time max. 4ms Contact ratings Type Contact Load Cycles IEC 61810 RTS3L A (NO) 20A, 250VAC resistive, 70C 20x103 RTS3L monostable A (NO) 16A, 250VAC resistive, 85C 100x103 RTS3T A (NO) 16A, 250VAC resistive, 85C 5x103 In process: Type Contact Load Cycles RTSET A (NO) 16A, 250VAC resistive, 85C 5x103 UL 508 RTS3L A (NO) 20A, 250VAC, general purpose, 70C 20x103 RTS3L A (NO) 16A, 250VAC, resistive, 85C 50x103 RTS3L A (NO) TV8, 240VAC, 40C 25x103 RTS3L A (NO) 1.5hp, 240VAC, 70C 30x103 RTS3T A (NO) 1200W Tungsten, 120VAC/277VAC, 60Hz, 50C 6x103 RTS3T A (NO) 2A, 480VAC, magnetic ballast, 80C 10x103 * RTS3T A (NO) 2A, 480VAC, electronic ballast, 80C 10x103* RTS3T A (NO) 3A, 277VAC, electronic ballast, 80C 15x103 RTS3T A (NO) 5A, 120VAC, electronic ballast, 80C 15x103 RTS3T A (NO) 5A, 277VAC, electronic ballast, 85C 10x103 RTS3T A (NO) 5A, 347VAC, electronic ballast, 105C with z.c 10x103* RTS3T A (NO) 5A, 347VAC, magnetic ballast, 105C 10x103 RTS3T A (NO) 3A, 480VAC, magnetic ballast, 105C 10x103* RTSET A (NO) 16A, 250VAC, general purpose, 85C 5x103 RTSET A (NO) 8A, 277VAC, electronic ballast, 85C 6x10 RTSET A (NO) 5A, 277VAC, electronic ballast, 85C 10x103 RTSET A (NO) 3A, 277VAC, electronic ballast, 85C 20x103 RTSET A (NO) 5A, 120VAC, electronic ballast, 85C 20x103 Contact Data (continued), Mechanical endurance DC coil bistable version tab manually operated RT.3T / RTSET >5x106 ops. >3x106 / >1x106 ops. >1x103 ops. Coil Data, monostable DC coil Coil voltage range Operative range, IEC 61810 Coil insulation system according UL1446 RT.3T Coil versions, monostable DC coil Coil Rated Operate Release code voltage voltage voltage VDC VDC VDC 005 5 3.5 0.5 006 6 4.2 0.6 009 9 6.3 0.9 012 12 8.4 1.2 024 24 16.8 2.4 048 48 33.6 4.8 060 60 42.0 6.0 110 110 77.0 11.0 RTS3L >10x106 ops. >5x106 ops. - RTSET 5 to 110VDC 2 class F Coil resistance 10%1) 62 90 203 360 1440 5520 85701) 288001) RTS3L Rated coil power mW 403 400 400 400 400 417 420 420 1) Coil resistance 12%. All figures are given for coil without pre-energization, at ambient temperature +23C. Other coil voltages on request. * Special test conditions available on request 01-2019, Rev. 0119 www.te.com (c) 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Catalog product data, `Definitions' section, application notes and all specifications are subject to change. 1 General Purpose RT-iPower SCHRACK Power PCB Relay RT Inrush Power (Continued) Coil Data (continued), bistable coils 1 coil 2 coils Coil Data RT.3T RTS3L Magnetic system polarized, bistable Coil voltage range 3 to 24VDC Operative range, IEC 61810 2 Limiting voltage, % of rated coil voltage 120% 150% Min./Max. energization duration30ms/1min at <10% duty factor Coil insulation system according UL1446 class F Coil versions, bistable Coil Rated Set Reset code voltage voltage voltage VDC VDC VDC Coil versions, bistable 1 coil A03 3 2.1 1.7 A12 12 8.4 6.6 A24 24 16.8 13.2 Coil versions, bistable 2 coils F03 3 2.1 1.7 F12 12 8.4 6.6 F24 24 16.8 13.2 Coil resistance 10% Rated coil power mW 21 360 1440 429 400 400 15 240 886 600 600 650 All figures are given for coil without pre-energization, at ambient temperature +23C. Other coil voltages on request. Coil Data RTSET Coil versions, bistable Coil Rated Set Reset code voltage voltage voltage VDC VDC VDC Coil versions, bistable 1 coil A03 3 2.1 1.8 A12 12 8.4 7.2 A24 24 16.8 14.4 Coil versions, bistable 2 coils F03 3 2.1 1.8 F12 12 8.4 7.2 F24 24 16.8 14.4 Insulation Data Initial dielectric strength between open contacts between contact and coil Clearance/creepage between contact and coil Material group of insulation parts Tracking index of relay base 1250Vrms 5000Vrms 10/10mm IIIa PTI 250V Other Data Coil resistance 10% Rated coil power mW 21 360 1440 429 400 400 15 240 886 600 600 650 Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature RT.3T / RTS3L monostable DC coil -40 to 105C bistable 1 coil -10 to 105C bistable 2 coils -40 to 105C Ambient temperature RTSET monostable DC coil -40 to 85C bistable 1 coil -10 to 85C bistable 2 coils -40 to 85C All figures are given for coil without pre-energization, at ambient temperature +23C. Other coil voltages on request. Bistable coils - operation Version 1 coil 2 coils Coil terminals A1 A2 A1 A3 A2 Operate + - + Reset + + Contact position not defined at delivery Category of environmental protection IEC 61810 RTIII - wash tight available upon request Vibration resistance (functional), monostable version Shock resistance (destructive) Terminal type Weight, without / with test tab Resistance to soldering heat THT IEC 60068-2-20 Packaging/unit without test tab with test tab RT.3T / RTSET RTS3L RTII - flux proof 10g 20g 100g PCB-THT, plug-in2) 14/16g 14g/270C/10s RT.3T / RTSET tube/20 pcs., box/500 pcs. tray/25 pcs., box/100 pcs. RTS3L tube/20 pcs., box/500 pcs. - 2) RTT3T or bistable 2 coil version: PCB mounting only. See Accessories. Accessories RTS. For details see datasheet Accessories Industrial Power Relay RT Socket available for 1 coil version only. NOTE: indicated contact ratings and electrical endurance data for direct wiring of relays (according IEC 61810-1); for relays mounted on sockets deratings may apply. 2 01-2019, Rev. 0119 www.te.com (c) 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Catalog product data, `Definitions' section, application notes and all specifications are subject to change. General Purpose RT-iPower SCHRACK Power PCB Relay RT Inrush Power (Continued) Terminal assignment Bottom view on solder pins monostable version bistable version a) a) Indicated contact position during or after coil energization with reset voltage. b) for 2 coil version only Dimensions / PCB layout version without test tab 16A, pinning 5mm b) for 2 coil version only S0272-BW version with test tab *) With the recommended PCB hole sizes a grid pattern from 2.5mm to 2.54mm can be used. 01-2019, Rev. 0119 www.te.com (c) 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Catalog product data, `Definitions' section, application notes and all specifications are subject to change. 3 General Purpose RT-iPower SCHRACK Power PCB Relay RT Inrush Power (Continued) Product code structure Type RT Version S Typical product code RT S 3 T A12 Power PCB Relay RT1 Inrush Power Without test tab T Contact configuration 3 1 form A (NO) contact E Contact material L AgSnO2 T Coil Coil code: please refer to coil versions table With test tab (manual operator) for version RTT3T` bistable coil only 1 form A(NO) electronic ballast` contact Tungsten (W) pre-make + AgSnO2 Version Blank Standard Version WG Product in accordance to IEC 60335-1 Product code RTS3L005 RTS3L006 RTS3L012 RTS3L024 RTS3LA12 RTS3LF12 RTS3LF24 RTS3T005 RTS3T012 RTS3T024 RTS3L048 RTS3T048 RTS3T060 RTS3TA05 RTS3TA06 RTS3TA12 RTS3TF03 RTS3TF12 RTS3TF24 RTT3TA12 RTT3TF24 RTS3L012WG RTS3L024WG RTS3T012WG RTS3TA24WG RTSET005 RTSET012 RTSET024 RTSETA12 RTSETA24 RTSETF12 RTSETF24 Version Without test tab, 16mm high Contacts 1 form A (NO) contact Contact material AgSnO2 Coil version Monostable Bistable, 1 coil Bistable, 2 coils Without test tab, 15.7mm high W pre-make + AgSnO2 Monostable Bistable, 1 coil Bistable, 2 coils With test tab, 23.6mm high Without test tab, 15.7 mm high 1form A (NO) contact Bistable, 1 coil Bistable, 2 coils Monostable AgSnO2 W pre-make + AgSnO2 Without test tab, 15.7mm high 1 form A (NO) contact W pre-make + AgSnO2 Bistable 1 coil Monostable Bistable, 1 coil Bistable, 2 coils Coil Version Part number 5VDC 6VDC 12VDC 24VDC 12VDC 12VDC 24VDC 5VDC 12VDC 24VDC 48VDC 48VDC 60VDC 5VDC 6VDC 12VDC 3VDC 12VDC 24VDC 12VDC 24VDC 12VDC 24VDC 12VDC 24VDC 5VDC 12VDC 24VDC 12VDC 24VDC 12VDC 24VDC Standard 1-1415898-8 4-1415898-4 1-1415898-9 1-1415898-4 2-1415898-3 2-1415898-5 2-1415898-6 1-1415898-6 1415898 1415898-1 2-1415898-1 1-1415898-1 1-1415898-2 1-1415898-5 3-1415898-1 1415898-2 1415898-4 1415898-5 1415898-6 1415898-7 1-1415898-0 2-1415898-7 5-1415898-1 5-1415898-6 4-1415898-7 7-1415898-7 7-1415898-9 8-1415898-0 8-1415898-6 8-1415898-7 9-1415898-1 9-1415898-3 IEC60335-1 compliant Standard This list represents the most common types and does not show all variants covered by this datasheet. Other types on request. 4 01-2019, Rev. 0119 www.te.com (c) 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Catalog product data, `Definitions' section, application notes and all specifications are subject to change.